The potential leaching and mobilization of trace elements from FGD-gypsum of a coal-fired power plant under water re-circulation conditions

Experimental and geochemical modelling studies were carried out to identify mineral and solid phases containing major, minor, and trace elements and the mechanism of the retention of these elements in Flue Gas Desulphurisation (FGD)-gypsum samples from a coal-fired power plant under filtered water recirculation to the scrubber and forced oxidation conditions. The role of the pH and related environmental factors on the mobility of Li, Ni, Zn, As, Se, Mo, and U from FGD-gypsums for a comprehensive assessment of element leaching behaviour were also carried out. Results show that the extraction rate of the studied elements generally increases with decreasing the pH value of the FGD-gypsum leachates. The increase of the mobility of elements such as U, Se, and As in the FGD-gypsum entails the modification of their aqueous speciation in the leachates; UO₂SO₄, H₂Se, and HAsO₂ are the aqueous complexes with the highest activities under acidic conditions. The speciation of Zn, Li, and Ni is not affected in spite of pH changes; these elements occur as free cations and associated to SO₄ ² in the FGD-gypsum leachates. The mobility of Cu and Mo decreases by decreasing the pH of the FGD-gypsum leachates, which might be associated to the precipitation of CuSe₂ and MoSe₂, respectively. Time-of-Flight mass spectrometry of the solid phase combined with geochemical modelling of the aqueous phase has proved useful in understanding the mobility and geochemical behaviour of elements and their partitioning into FGD-gypsum samples.     

Evaluating Terrestrial Carbon Sequestration Options for Virginia

Changes in forest and agricultural land management practices have the potential to increase carbon (C) storage by terrestrial systems, thus offsetting C emissions to the atmosphere from energy production. This study assesses that potential for three terrestrial management practices within the state of Virginia, USA: afforestation of marginal agricultural lands; afforestation of riparian agricultural lands; and changing tillage practices for row crops; each was evaluated on a statewide basis and for seven regions within the state. Lands eligible for each practice were identified, and the C storage potential of each practice on those lands was estimated through a modeling procedure that utilized land-resource characteristics represented in Geographic Information System databases. Marginal agricultural lands’ afforestation was found to have the greatest potential (1.4 Tg C yr⁻¹, on average, over the first 20 years) if applied on all eligible lands, followed by riparian afforestation (0.2 Tg C yr⁻¹ over 20 years) and tillage conversion (0.1 Tg C yr⁻¹ over 14 years). The regions with the largest potentials are the Ridge and Valley of western Virginia (due to extensive areas of steep, shallow soils) and in the Mid-Atlantic Coastal Plain in eastern Virginia (wet soils). Although widespread and rapid implementation of the three modeled practices could be expected to offset only about 3.4% of Virginia’s energy-related CO₂ emissions over the following 20 years (equivalent to about 8.5% of a Kyoto Treaty–based target), they could contribute to achievement of C-management goals if implemented along with other mitigation measures.     

Adverse health effects of outdoor air pollutants

Much research on the health effects of outdoor air pollution has been published in the last decade. The goal of this review is to concisely summarize a wide range of the recent research on health effects of many types of outdoor air pollution. A review of the health effects of major outdoor air pollutants including particulates, carbon monoxide, sulfur and nitrogen oxides, acid gases, metals, volatile organics, solvents, pesticides, radiation and bioaerosols is presented. Numerous studies have linked atmospheric pollutants to many types of health problems of many body systems including the respiratory, cardiovascular, immunological, hematological, neurological and reproductive/ developmental systems. Some studies have found increases in respiratory and cardiovascular problems at outdoor pollutant levels well below standards set by such agencies as the US EPA and WHO. Air pollution is associated with large increases in medical expenses, morbidity and is estimated to cause about 800,000 annual premature deaths worldwide [Cohen, A.J., Ross Alexander, H., Ostro, B., Pandey, K.D., Kryzanowski, M., Kunzail, N., et al., 2005. The global burden of disease due to outdoor air pollution. J Toxicol Environ Health A. 68: 1-7.]. Further research on the health effects of air pollution and air pollutant abatement methods should be very helpful to physicians, public health officials, industrialists, politicians and the general public.     

Evaluation of the flexibility of protective gloves.

Two mechanical methods have been developed for the characterization of the flexibility of protective gloves, a key factor affecting their degree of usefulness for workers. The principle of the first method is similar to the ASTM D 4032 standard relative to fabric stiffness and simulates the deformations encountered by gloves that are not tight fitted to the hand. The second method characterizes the flexibility of gloves that are worn tight fitted. Its validity was theoretically verified for elastomer materials. Both methods should prove themselves as valuable tools for protective glove manufacturers, allowing for the characterization of their existing products in terms of flexibility and the development of new ones better fitting workers' needs.     

Investigations into a novel method for atmospheric polycyclic aromatic hydrocarbon monitoring

A novel analytical method for atmospheric polycyclic aromatic hydrocarbons (PAHs) was developed based on laser induced fluorescence (LIF) of samples on quartz multi-channel polydimethylsiloxane traps. A tunable dye laser with a frequency doubling crystal provided the excitation radiation, and a double monochromator with a photomultiplier tube detected emitted fluorescence. The method allowed for the rapid (<5 min), cost effective analysis of samples. Those yielding interesting results could be further analysed by direct thermal desorption-gas chromatography–mass spectrometry (TD–GC–MS, with limits of detection of ～0.3 ng m^?3), as photodegradation was minimal (<10% over 5 min irradiation). Small amounts of naphthalene photodegradation products identified by TD–GC–MS after >15 min irradiation, included phenol, benzyl alcohol and phthalic anhydride. Without any signal optimization, a LIF detection limit of ～1 μg m^?3 was established for naphthalene using a diffusion tube (diffusion rate of 2 ng s^?1) and 292 nm excitation.     

Adolescent driving: Characteristics associated with single-vehicle and injury crashes

The high motor-vehicle crash rate of young drivers may be attributed to both driving inexperience and a greater tendency to engage in risk-taking behavior. This study examines risk-taking behavior, as indicated by single-vehicle crashes and injury crashes, and factors associated with these behaviors, based on measures of demographic, psychosocial, and substance use obtained from high school senior questionnaires. Because previous work indicated different predictors for young men and young women, separate logistic regression analyses were conducted. For young women, propensity toward cigarette use was associated with higher rates of single-vehicle crashes; while race, alcohol misuse, and friends' involvement with alcohol and marijuana were associated with injury crashes. For young men, availability of substances, driving frequency, alcohol misuse, and propensity toward marijuana use were associated with higher rates of single-vehicle crashes. Young men's living situation, availability of substances, and marijuana use were related to injury crashes.     

Muscle tetanus and loading condition effects on the elastic and viscous characteristics of the thorax

Thoracic deformation under an applied load is an established indicator of injury risk, but the force required to achieve an injurious level of deformation currently is not understood adequately. This article evaluates how two potentially important factors, loading condition and muscle tensing, affect the structural response of the dynamically loaded thorax. Structural models of two human cadaver thoraxes and two porcine thoraxes were used to quantify the effects. The human cadavers, which represent anthropometric extremes, were subjected to anterior loading from (1) a 5.1-cm-wide belt oriented diagonally (i.e., seatbelt-like loading), (2) a 15.2-cm-diameter rigid hub, and (3) a 20.3-cm-wide belt oriented laterally (i.e., a distributed load). A structural model having the mathematical formulation of a quasilinear viscoelastic material model was used to model the elastic and viscous response, with ramp-hold tests used to determine the model coefficients. The effect of thoracic musculature was assessed using similar ramp-hold tests on the porcine subjects, each with and without forced muscle contraction. Even maximally contracted thoracic musculature is shown to have a minimal effect on the response, with similar elastic and viscous characteristics exhibited by each subject regardless of muscle tone. The elastic response is shown to be approximately a factor of three stiffer for diagonal belt loading and for this distributed loading condition than for the hub loading, indicating that the response is influenced most by the particular anatomical structures that are engaged and, secondarily, by the area of load application. Specifically, shoulder involvement is shown to have a strong influence. The force relaxation is found to be pronounced, but insensitive to the loading condition, with long-time force relaxation coefficients (G( infinity )) in the range of 0.1 to 0.3. The findings of this study provide restraint-specific guidelines for the force-deflection characteristics of both physical and computational thoracic models.     

Accumulation, release, and solubility of arsenic, molybdenum, and vanadium in wetland sediments

This study was undertaken to determine the fate of As, Mo, and V (trace elements, TEs) in the sediments of a constructed wetland in use for the remediation of potentially toxic trace element-contaminated agricultural drainwater. After three years of wetland operation, sediment cores were collected to determine changes in TE concentrations as a function of depth and the effects of varying water column depth. All TE concentrations were highest in the top 2 to 4 cm and decreased with depth. Molybdenum accumulated in the wetland sediments, up to levels of 32.5 +/- 4.6, 30.2 +/- 8.9, and 59.3 +/- 26.1 mg kg(-1) in the top 1 cm of sediment at water depths of 15, 30, and 60 cm, respectively. In the top 2 cm of sediment, As accumulated (28.2 +/- 3.0 mg kg(-1)) only at the 60-cm water depth. Below 2 cm, as much as 10 mg kg(-1) of As was lost from the sediment at all water depths. In most cases, V concentrations decreased in the sediment. In this wetland system, the lowest redox potentials were found near the sediment surface and increased with depth. Thus, in general As, Mo, and V concentrations in the sediment were highest under more reducing conditions and lowest under more oxidizing conditions. Most of the accumulated Mo (73%) became water soluble on drying of samples. This has important implications for systems undergoing changes in redox status; for instance, if these wetland sediments are dried, potentially large amounts of Mo may be solubilized.