Variations of denitrification in a farming catchment area

We measured denitrification at 15 sites during 1 year in a agricultural catchment in Brittany, France. Our objective was to assess the relative importance of heterotrophic denitrification on the fate of excess nitrogen at the catchment scale, and to quantify the relative importance of riparian areas on the N₂O emissions. Using the C₂H₂ inhibition technique, denitrification rate on soil core and denitrifying enzyme activity (DEA) were each determined, for samples taken from two soil layers: 0–20 and 20–40 cm. Denitrification rates, ranging from 0 to 417 mg N m⁻² d⁻¹, were significantly higher in riparian areas than for hillslopes (median of 24.87 against 10.38 mg N m⁻² d⁻¹). However, since denitrification rates are significant in the hillslope and given that hillslope surface area is much greater (79% of catchment surface), this domain could be responsible for half of the overall denitrified nitrogen (N). Also, the 20–40 cm deep soil layer was found to account for more than 46% of the denitrification. The DEA indicates the potential for denitrifying activity by the soil under non-limiting conditions, measured values ranged from 76.48 to 530.63 ng N g⁻¹ dry soil h⁻¹. The ratio N₂O/(N₂O + N₂) was about 60% with no clear spatial or temporal trends. Soil moisture appeared to be the main limiting factor for denitrification at the field scale. The results suggest that, for this catchment, denitrification is a major route for nitrogen removal, but a significant proportion of this removal occurs as N₂O.     

Presence of Torque Teno Virus (TTV) in Tap Water in Public Schools from Southern Brazil

Torque teno virus (TTV) was surveyed in tap water collected in schools from three municipalities located in the south of Brazil. TTV genomes were found in 11.7 % (4/34) of the samples. TTV DNA was detected in 10.5 % (2/19) of the samples collected at the city of Caxias do Sul and in 25 % (2/8) of the samples from Pelotas. Those cities have a low rate of sewage treatment. All samples from Santa Cruz do Sul, which has nearly 92 % of its sewage treated, were negative. These results suggest that the amount of sewage treated may have an effect on the detection rates of TTV DNA in drinking water in a given urban area, showing a mild negative correlation (r = ?0.76), when comparing the percentage of sewage treatment to the detection of TTV genomes. The detection rate of TTV was also compared with Escherichia coli, showing a strong correlation (r = 0.97), indicating that TTV may be a suitable marker of fecal contamination.     

Distribution and possible source of trace elements in the sediment cores of a tropical macrotidal estuary and their ecotoxicological significance

The paper presents the first document regarding concentration, distribution and possible sources of selected trace elements (Cu, Fe, Mn, Zn, Cr, Co, Ni, Pb, Al, B and Ba) in core sediments (<63 micro particle size) from the lower stretch of Hugli (Ganges) estuary, northeast coast of Bay of Bengal by ICP-AES and EDXRF to evaluate geochemical processes influencing their distribution and possible environmental consequences. The levels of elements showed a wide range of variations in different core depths, in upper and lower intertidal zones as well as among three sampling stations. The most interesting feature of the study is the downward increase of concentrations of majority of the elements reaching overall maximum values at a depth of 20-28 cm in upper littoral zone of the site located in the extreme downstream stretch of the estuary. Values of organic carbon showed very strong positive correlations with most of the elements as revealed by correlation matrix (r) values. The interelemental relationship revealed the identical behavior of element during its transport in the estuarine environment. The overall variation in concentration can be attributed to differential discharge of untreated effluents originating from industrial, agricultural, and aquacultural sources as well as from domestic sewage along with the fishing and boating activities. The resulting compositional dataset was tested by principal component analyses and cluster analyses. Pollution load index (PLI) and index of Geoaccumulation (Igeo) revealed overall low values but the enrichment factors (EFs) for Pb were typically high for all the stations. The mean concentrations of Zn and to some extent Cu exceeded the Effects Range-Low (ER-L) values in the majority of the cases indicating that there may be some ecotoxicological risk to organisms living in sediments. The concentration of the trace elements reported in this work is useful as baselines for comparison in future sediment quality studies.     

Forest protection and economic development by offshoring wood extraction: Bhutan’s clean development path

With globalization, virtual exchanges of natural resources embodied in traded commodities redistribute geographically land use and its environmental impacts. Benefits of national forest protection may be undermined at the global-scale by leakage through international trade. We studied land use displacement associated with national policies to protect forests in Bhutan. This case study provides a simple situation: a dominant forest cover almost unaffected by agricultural expansion, a rural economy dominated by the primary sector, centralized forest conservation policies, and a dominant trading partner. We assessed the net effects at the international level of the Bhutanese forest protection policies by accounting for trade in wood products with India. Our results show that these policies have been effective in maintaining a high forest cover, but have been accompanied by an increasing displacement of forest use to India. In 1996–2011, the difference between the total volume of wood imported from India and the total volume exported from Bhutan—i.e., the net displacement—corresponds to 27 % of the total volume consumed in Bhutan. In 2011, 68 % of the total forest area required to produce the wood consumed in Bhutan was located in India. The wood imported by Bhutan was likely originating from tree plantations in the northeastern Indian states. Since Bhutan has few tree plantations and very valuable natural forests, the net international-level ecological impacts of this land use displacement is arguably positive. Most of the wood imports of Bhutan were wood charcoal for its emerging chemical industries. This case of displacement reflects functional upgrading in the value-chain rather than an externalization of consumption-based environmental costs. Through its government policies, Bhutan has managed to support its economic development while protecting its forests and leapfrogging the negative impacts on forests generally associated with the early stages of modernization.     

Methane emissions from natural wetlands

Methane is considered one of the most important greenhouse gases in the atmosphere. Because of the strict anaerobic conditions required by CH₄-generating microorganisms, natural wetland ecosystems are one of the main sources of biogenic CH₄. The total natural wetland area is estimated to be 5.3 to 5.7 × 10¹² m², making up less than 5% of the Earth's land surface. However, natural wetland plays a disproportionately large role in CH₄ emissions. Wetlands are likely the largest natural sources of CH₄ to the atmosphere, accounting for about 20% of the current global annual emission. Out of the total amount of CH₄ emitted, northern wetlands contribute 34%, temperate wetlands 5%, and tropical systems about 60%.Because of the unique characteristics and high productivity, wetland ecosystems are important in the global carbon cycle. Natural wetlands are permanently or temporarily saturated. Strict anaerobic conditions consequently develop, which allows methanogenesis to occur. But the thin oxic layer and the oxic plant rhizophere promote activity of CH₄-oxidizing bacteria or methanotrophs. Thus, both CH₄ formation and consumption in wetland systems are microbiological processes and are controlled by many factors. Eight of the controlling factors, including carbon supply, soil oxidation-reduction status, pH, temperature, vegetation, salinity and sulfate content, soil hydrological conditions and CH₄ oxidation are discussed in this paper.     

Temporal and spatial trend analysis of surface water quality in the Doce River basin,Minas Gerais,Brazil

In Brazil, specifically in the Doce River basin, there is still a great lack of studies on temporal and spatial trends in water quality, since the water quality in the monitoring campaigns is basically evaluated when it comes down to the concentrations of monitored variables. In this sense, the objective of this work was to perform a temporal and spatial trend analysis of water quality data in the Minas Gerais portion of the Doce River basin, Brazil. For this, the Mann–Kendall, seasonal Mann–Kendall and Spearman correlation tests were used in the temporal analysis and the cluster analysis in the spatial analysis. In the analysis of temporal trends, the analyses were performed using the values of the National Sanitation Foundation Water Quality Index (NSFWQI) and the variables that compose it. In the analysis of spatial trends, the stations were evaluated only based on the WQI. With the results of the analysis of temporal trend, it was identified that most stations did not present a statistically significant trend for the WQI. In the stations that presented trends of quality reduction, most of them are in densely populated areas, demonstrating the strong influence of the poor sanitary conditions of the municipalities to the water quality of the basin. When analyzing the variables that compose the WQI, the results found for nitrate demonstrated that water quality deterioration is also affected by the diffuse pollution originating from farming areas. The results for Escherichia coli reinforced the impact of the discharge of domestic effluents and demonstrated the absence of a significative trend is still of concern because it can represent the maintenance of a degradation state in the water bodies. In the spatial trend analysis, the CA grouped the monitoring stations into six clusters based on their similarity among the WQI values, and, together with the results of the other analyses, it was verified that the Caratinga River basin (UGRH5 Caratinga) presented the highest degree of pollution. It was also possible to identify five stations that can be reallocated or deactivated since they have similarities with other stations located in the same watercourse.

     

Mechanical and toxicological evaluation of concrete artifacts containing waste foundry sand

The creation of metal parts via casting uses molds that are generally made from sand and phenolic resin. The waste generated after the casting process is called waste foundry sand (WFS). Depending on the mold composition and the casting process, WFS can contain substances that prevent its direct emission to the environment. In Brazil, this waste is classified according to the Standard ABNT NBR 10004:2004 as a waste Class II (Non-Inert). The recycling of this waste is limited because its characteristics change significantly after use. Although the use (or reuse) of this byproduct in civil construction is a technically feasible alternative, its effects must be evaluated, especially from mechanical and environmental points of view. Thus, the objective of this study is to investigate the effect of the use of WFS in the manufacture of cement artifacts, such as masonry blocks for walls, structural masonry blocks, and paving blocks. Blocks containing different concentrations of WFS (up to 75% by weight) were produced and evaluated using compressive strength tests (35 MPa at 28 days) and toxicity tests on Daphnia magna, Allium cepa (onion root), and Eisenia foetida (earthworm). The results showed that there was not a considerable reduction in the compressive strength, with values of 35 ± 2 MPa at 28 days. The toxicity study with the material obtained from leaching did not significantly interfere with the development of D. magna and E. foetida, but the growth of the A. cepa species was reduced. The study showed that the use of this waste in the production of concrete blocks is feasible from both mechanical and environmental points of view.     

The antennal sensilla of Melipona quadrifasciata (Hymenoptera: Apidae: Meliponini): a study of different sexes and castes

The sensilla of insects are integumental units that play a role as sensory structures and are crucial for the perception of stimuli and for communication. In this study, we compared the antennal sensilla of females (workers and queens), males (haploid (n) and diploid (2n)), and queen-like males (QLMs, resulting from 2n males after juvenile hormone (JH) treatment) in the stingless bee Melipona quadrifasciata. Images of the dorsal antenna surfaces were acquired using a scanning electron microscope. As reported for other hymenopterans, this species exhibits a heterogeneous sensillar distribution along the antennae. Thirteen different types of sensilla were found in the antennae of M. quadrifasciata: trichodea (subtypes I to VI), chaetica (subtypes I and II), placodea, basiconica, ampullacea, coeloconica, and coelocapitula. Sensilla trichodea I were the most abundant, followed by sensilla placodea, which might function in olfactory perception. Sensilla basiconica, sensilla chaetica I, sensilla coeloconica, and sensilla ampullacea were found exclusively in females. In terms of the composition and size of the sensilla, the antennae of QLMs most closely resemble those of the 2n male, although QLMs exhibit a queen phenotype. This study represents the first comparative analysis of the antennal sensilla of M. quadrifasciata. The differences found in the type and amount of sensilla between the castes and sexes are discussed based on the presumed sensillary functions.     

Catalytic and electrocatalytic hydrogenolysis of brominated diphenyl ethers

Polybrominated diphenyl ethers (PBDEs) are ubiquitous environmental contaminants due to their use as additive flame-retardants. Conventional catalytic hydrogenolysis in methanol solution and electrocatalytic hydrogenolysis in aqueous methanol were examined as methods for debrominating mono- and di-bromodiphenyl ethers, as well as a commercial penta-PBDE mixture, in each case using palladium on alumina as the catalyst. Electrocatalytic hydrogenolysis employed a divided flow-through batch cell, with reticulated vitreous carbon cathodes and IrO2/Ti dimensionally stable anodes. Both methods gave efficient sequential debromination, with essentially complete removal of bromine from the PBDEs, but the electrocatalytic method was limited by the poor solubility of PBDEs in aqueous methanol.     

PAH removal from spiked municipal wastewater sewage sludge using biological, chemical and electrochemical treatments

Polycyclic aromatic hydrocarbons (PAHs) have been widely studied due to their presence in all the environmental media and toxicity to life. These molecules are strongly adsorbed on the particulate matters of soils, sludges or sediments because of their strong hydrophobicity which makes them less bioavailability, thus limiting their bioremediation. Different sludge treatment processes were tested to evaluate their performances for PAH removal from sludge prealably doped with 11 PAHs (5.5mg each PAH kg(-1) of dry matter (DM)): two biological processes (mesophilic aerobic digestion (MAD) and simultaneous sewage sludge digestion and metal leaching (METIX-BS)) were tested to evaluate PAH biodegradation in sewage sludge. In parallel, two chemical processes (quite similar Fenton processes: chemical metal leaching (METIX-AC) and chemical stabilization (STABIOX)) and one electrochemical process (electrochemical stabilization (ELECSTAB)) were tested to measure PAH removal by these oxidative processes. Moreover, PAH solubilisation from sludge by addition of a nonionic surfactant Tween 80 (Tw80) was also tested. The best yields of PAH removal were obtained by MAD and METIX-BS with more than 95% 3-ring PAH removal after a 21-day treatment period. Tw80 addition during MAD treatment increased 4-ring PAHs removal rate. In addition, more than 45% of 3-ring PAHs were removed from sludge by METIX-AC and during ELECSTAB process were quiet good with approximately 62% of 3-ring PAHs removal. However, little weaker removal of 3-ring PAHs (<35%) by STABIOX. None of the tested processes were efficient for the elimination of high molecular weight (> or = 5-ring) PAHs from sludge.