The strength of networks: the local NGO response to the tsunami in India

This paper examines the role played by a network of 12 local non-governmental organisations (NGOs)--the East Coast Development Forum (ECDF)-in the response to the Indian Ocean tsunami ('Asian tsunami') of 26 December 2004, which devastated the east coast of India. It examines how the ECDF sought to meet the needs of affected people through a direct relief programme, a rehabilitation programme focused on the restoration of livelihoods, and through advocacy to press for changes to government programmes to make them inclusive and to ensure that they satisfy the priority needs of the people most affected. The paper concludes that it was the trust and capacity built up through past network activities of the fisher, dalit, and tribal communities that enabled the ECDF to launch an effective response to the tsunami. A lesson to emerge is that the use of similar existing networks could be employed in other disaster responses around the world.     

The dispersal and storage of sediment-associated metals in an arid river system: the Leichhardt River, Mount Isa, Queensland, Australia

This paper details the distribution of Cu, Pb and Zn in aquatic systems draining Mount Isa Ag-Cu-Pb-Zn Mine in arid northern Queensland, Australia. Sediment-metal concentrations in the <2mm grain-size fraction adjacent to and downstream of the mine significantly exceed background concentrations (Cu, 159; Pb, 36; Zn, 86 ppm) as well as Australian government sediment quality low trigger guidelines (Cu, 65; Pb, 50; Zn, 200 ppm). Overbank sediments are more contaminated than channel sediments with mean values of Cu, 480; Pb, 540; Zn, 750 ppm. Mean concentrations in cut riverbank samples from the <2mm fraction were Cu, 195; Pb, 724; Zn, 807 ppm. Corresponding <180 microm samples returned concentrations of Cu, 321; Pb, 995; Zn, 1110 ppm. Delivery of contaminants during wet seasons from Mount Isa Mine and historically contaminated riverbanks remains an ongoing issue. The ease of dust entrainment in arid zones means that sediments enriched in toxic concentrations of metals may be widely dispersed and ultimately ingested and absorbed by biota.     

Methane balance of a bioreactor landfill in Latin America

This paper presents results from a methane (CH4) gas emission characterization survey conducted at the Loma Los Colorados landfill located 60 km from Santiago, Chile. The landfill receives approximately 1 million metric tons (t) of waste annually, and is equipped with leachate control systems and landfill gas collection systems. The collected leachate is recirculated to enable operation of the landfill as a bioreactor. For this study, conducted between April and July 2000, a total of 232 surface emission measurements were made over the 23-ha surface area of the landfill. The average surface flux rate of CH4 emissions over the landfill surface was 167 g x m(-2) x day(-1), and the total quantity of surface emissions was 13,320 t/yr. These values do not include the contribution made by "hot spots," originating from leachate pools caused by "daylighting" of leachate, that were identified on the landfill surface and had very high CH4 emission rates. Other point sources of CH4 emissions at this landfill include 20 disconnected gas wells that vent directly to the atmosphere. Additionally, there are 13 gas wells connected to an incinerator responsible for destroying 84 t/yr of CH4. The balance also includes CH4 that is being oxidized on the surface of the landfill by meth-anotrophic bacteria. Including all sources, except leachate pool emissions, the emissions were estimated to be 14,584 t/yr CH4. It was estimated that less than 1% of the gas produced by the decomposition of waste was captured by the gas collection system and 38% of CH4 generated was emitted to the atmosphere through the soil cover.     

Investigations on the effect of chlorine in lubricating oil and the presence of a diesel oxidation catalyst on PCDD/F releases from an internal combustion engine

This paper reports on an intensive study into releases of polychlorinated dibenzo-p-dioxins (PCDD), polychlorinated furans (PCDF) and polychlorinated biphenyls (PCB) from a diesel engine and the analysis of PCDD/F and PCB in crankcase lubricating oil. Experimental conditions were set and carefully controlled in order to maximize the possible impact of, and our ability to measure the effect of, changes in the levels of chlorine in the lubricant. Emissions to air were measured using modified EPA methods following the principles of the European EN 1948 standards. A series of 40 experimental runs were completed using three reference lubricants formulated to have three levels of chlorine present as a residual component (at levels of 12, 131 and 259 mg kg(-1) or ppm). The engine was run with and without the diesel oxidation catalyst. All lubricants were realistic oils and the use of unrealistic additives or doping of components - particularly chlorine - in the fuel and lubricant was carefully avoided. Analysis of fuel and lubricant (before and after testing) samples required strenuous attention to achieve acceptable recoveries and showed non-detectable levels of PCB and PCDD/F at a detection limit of around 1.5 ng I-TEQ kg(-1) (ppt), indistinguishable from the laboratory blank. The testing demonstrated the need for extreme care to be taken in developing measurement methods that are sufficiently sensitive for measuring chlorine content of fluids and PCDD/F in oils, the latter being particularly challenging. Mean emissions of PCDD/F with the diesel oxidation catalyst in place were 23 pg I-TEQ l(-1) of fuel and with the diesel oxidation catalyst removed 97 pg I-TEQ l(-1) of fuel. The results of this testing showed that the emissions of PCDD/F were greatly reduced by the presence of a diesel oxidation catalyst in the exhaust, a finding that has not been explicitly tested in previous work. They also show that emissions from the engine were not controlled by the level of chlorine in the lubricant and that emissions did not change in response to a much greater step change in the total chlorine entering the combustion chamber due to a change in the level of chlorine in the fuel. Emissions when the engine was configured with a diesel oxidation catalyst showed a consistent pattern that appears to be unique in the experience of the authors.     

Influence of waste input and combustion technology on MSWI bottom ash quality

The waste input and the process technology of waste incineration plants appear to have a great influence on bottom ash quality. To better understand how these parameters can affect the characteristics of residues, bottom ash from six plants were tested and compared in this study. Bottom ash physico-chemical characteristics were investigated by chemical analyses, and leaching tests. In order to understand their long-term behavior, accelerated ageing experiments and biodegradation tests were also performed. The whole analyses gave complementary information. It was shown that the six samples do have different properties. Waste inputs have a great influence on Cl and S content in bottom ash, as well as on the Ca/Si ratio. The importance of this ratio on the carbonation process has been demonstrated. Combustion parameters have an influence on the quantity and mobility of the residual organic matter.     

Portable XRF analysis of occupational air filter samples from different workplaces using different samplers: final results, summary and conclusions

This paper concludes a five-year program on research into the use of a portable X-ray fluorescence (XRF) analyzer for analyzing lead in air sampling filters from different industrial environments, including mining, manufacturing and recycling. The results from four of these environments have already been reported. The results from two additional metal processes are presented here. At both of these sites, lead was a minor component of the total airborne metals and interferences from other elements were minimal. Nevertheless, only results from the three sites where lead was the most abundant metal were used in the overall calculation of method accuracy. The XRF analyzer was used to interrogate the filters, which were then subjected to acid digestion and analysis by inductively-coupled plasma optical-emission spectroscopy (ICP-OES). The filter samples were collected using different filter-holders or "samplers" where the size (diameter), depth and homogeneity of aerosol deposit varied from sampler to sampler. The aerosol collection efficiencies of the samplers were expected to differ, especially for larger particles. The distribution of particles once having entered the sampler was also expected to differ between samplers. Samplers were paired to allow the between-sampler variability to be addressed, and, in some cases, internal sampler wall deposits were evaluated and compared to the filter catch. It was found, rather surprisingly, that analysis of the filter deposits (by ICP-OES) of all the samplers gave equivalent results. It was also found that deposits on some of the sampler walls, which in some protocols are considered part of the sample, could be significant in comparison to the filter deposit. If it is concluded that wall-deposits should be analyzed, then XRF analysis of the filter can only give a minimum estimate of the concentration. Techniques for the statistical analysis of field data were also developed as part of this program and have been reported elsewhere. The results, based on data from the three workplaces where lead was the major element present in the samples, are summarized here. A limit of detection and a limit of quantitation are provided. Analysis of some samples using a second analyzer with a different X-ray source technology indicated reasonable agreement for some metals (but this was not evaluated for lead). Provided it is only necessary to analyze the filters, most personal samplers will provide acceptable results when used with portable XRF analysis for lead around applicable limit values.     

Organic pollutants in compost and digestate. Part 2. Polychlorinated dibenzo-p-dioxins, and -furans, dioxin-like polychlorinated biphenyls, brominated flame retardants, perfluorinated alkyl substances, pesticides, and other compounds

Compost and digestate are important recycling fertilizers and have beneficial effects on soil parameters. However, they can contain significant amounts of organic pollutants. Here, the first comprehensive data set on dibenzo-p-dioxins and -furans (PCDD/F), dioxin-like polychlorinated biphenyls (DL-PCB), brominated flame retardants, perfluorinated alkyl substances (PFAS), pesticides, phthalates, nonylphenol and chlorinated paraffins (CP) in source-separated compost and digestate from Switzerland is presented (n = 3-18). The median summation 17PCDD/F and summation 12DL-PCB concentrations were at 3.2 ng I-TEQ kg(-1)dry weight (dw) and 3.0 ng WHO-TEQ kg(-1)dw, respectively. Brominated diphenyl ether 209 (BDE 209) accounted for 72% of the total polyBDE content (10 microg kg(-1)dw). Hexabromocyclododecane (HBCD) and tetrabromobisphenol A (TBBPA) levels were at 100 and 0.51 microg kg(-1)dw, respectively. PFAS were identified for the first time in compost and digestate (median concentration 6.3 microg kg(-1)dw, summation 21compounds). Out of 269 pesticides analysed, 30 fungicides, 14 herbicides, eight insecticides and one acaricide were detected. Di-(2-ethylhexyl)phthalate (DEHP) median concentration accounted for 280 microg kg(-1)dw and nonylphenol was below the detection limit of 1 mg kg(-1)dw. The sum of short and medium chain CP was between 90 and 390 microg kg(-1)dw. The concentrations observed were at or above the levels found in background soils, which are the main recipient of compost and digestate. Where actually applied, compost can contribute considerably to the total input of organic pollutants to the soil. However, on a total Swiss agricultural area base, inputs seem to be limited.     

Bleiverunreinigung von trinkwasser durch leitungssysteme in Berlin

There are many acute and chronic adverse effects of lead on human beings. This is especially true for infants and children. In Germany, the intake of lead through drinking water is commonly due to metal corrosion of the user’s plumbing. In the last years and decades, many lead pipes in Germany were replaced by pipes made of alternative materials. The aim of this study was to assess the present state of drinking water contamination and the resulting lead exposure in infants, the most sensitive population group. For this purpose, mothers of newborn babies were offered a free examination of their drinking water. After a written declaration of consent had been received, two composite samples collected during the day were obtained from the families. The samples were analyzed for their lead concentration using atomic absorption spectrometry. A total of 2109 samples from house holds in the area of Berlin, Germany were collected. From the first composite samples 5.6% and 7.0% of the second composite samples demonstrated lead concentrations higher than 0.01 mg/l (recommended limit of the WHO). 0.95% of the first composite samples and 1.3% of the second composite samples had concentrations above the limit of the German drinking water regulation (0.04 mg/l). The highest measured lead concentrations is the first and second composite samples were 0.19 and 0.13 mg/l, respectively. By region, the suburbs of Charlottenburg, Neukölln, Schöneberg, Wilmersdorf and Zehlendorf were particularly severley affected with more than 10% and their samples being elevated above 0.01 mg/l.     

Trace metal dynamics in an industrialized Brazilian river: A combined application of Zn isotopes, geochemical partitioning, and multivariate statistics

The Paraiba do Sul (PSR) and Guandu Rivers (GR) water diversion system (120 km long) is located in the main industrial pole of Brazil and supplies drinking water for 9.4 million people in the metropolitan region of Rio de Janeiro. This study aims to discern the trace metals dynamics in this complex aquatic system. We used a combined approach of geochemical tools such as geochemical partitioning, Zn isotopes signatures, and multivariate statistics. Zinc and Pb concentrations in Suspended Particulate Matter (SPM) and sediments were considerably higher in some sites. The sediment partition of As, Cr, and Cu revealed the residual fraction (F4) as the main fraction for these elements, indicating low mobility. Zinc and Pb were mostly associated with the exchangeable/carbonate (F1) and the reducible (F2) fractions, respectively, implying a higher susceptibility of these elements to being released from sediments. Zinc isotopic compositions of sediments and SPM fell in a binary mixing source process between lithogenic (δ^66/64Zn_JMC ≈ + 0.30‰) and anthropogenic (δ^66/64Zn_JMC ≈ + 0.15‰) end members. The lighter δ^66/64Zn_JMC values accompanied by high Zn concentrations in exchangeable/carbonate fraction (ZnF1) enable the tracking of Zn anthropogenic sources in the studied rivers. Overall, the results indicated that Hg, Pb, and Zn had a dominant anthropogenic origin linked to the industrial activities, while As, Cr, and Cu were mainly associated with lithogenic sources. This work demonstrates how integrating geochemical tools is valuable for assessing geochemical processes and mixing source effects in anthropized river watersheds.     

Characterizing agrochemical patterns and effective BMPs for surface waters using mechanistic modeling and GIS

Monitoring programs in the agriculturally intense San Joaquin River Valley of California have periodically found organophosphate (OP) insecticide concentrations, predominantly chlorpyrifos, diazinon and methidathion, at levels high enough to cause mortality for the aquatic invertebrate Ceriodaphnia dubia. These detections are likely the result of off-site movement from treated fields. However, the relative significance and magnitude of off-site transport pathways cannot be readily deduced from monitoring data alone. Therefore, a comprehensive modeling system has been constructed to estimate temporal and spatial pesticide source magnitudes and to follow the pesticide dissipation pathways once in surface water. The USEPA models HSPF and PRZM3 were used for the hydrology and non-point source predictions, respectively. Spray drift was accounted for using the mechanistic model AgDrift. The Orestimba Creek Watershed in the San Joaquin Valley was characterized and used as a typical watershed for this region. Representative transport pathways were ranked and quantified, and numerical implementation of best management practices (BMPs) determined which practice may have the highest likelihood for reducing pesticide loadings. Approximately 85% of the predicted chlorpyrifos mass detected between May 1, 1996, and April 30, 1997 resulted from drift, with the largest contributions coming from walnut orchards immediately adjacent to Orestimba Creek. Various simulated drift mitigation measures suggest chlorpyrifos mass loadings can be decreased by over 90% depending upon the type of mitigation chosen. Imposed drift BMPs should be effective in reducing chlorpyrifos levels found in surface waters of the San Joaquin valley if the Orestimba creek watershed is considered representative of watersheds found in this area of California.