Influence of photolysis on multispectral photoacoustic measurement of nitrogen dioxide concentration

Multispectral photoacoustic instruments are commonly used to measure aerosol and nitrogen dioxide (NO₂) light absorption coefficients to determine the radiation budget of the atmosphere. Here a new photoacoustic system is developed to explore the effect of photolysis on the measured signal in a multispectral photoacoustic spectrometer. In this system, a 405-nm laser is used primarily as light source for photolysis. Additionally, a well-overlapped 532-nm laser, modulated at the resonant frequency of the photoacoustic instrument, is used to probe the NO₂ concentration. As a result, the photolysis effect at 405 nm can be observed by the photoacoustic instrument through the 532-nm laser. This work determines an 11% reduction of the photoacoustic signal caused by the photolysis effect for typical conditions, which needs to be taken into account when calibrating multispectral photoacoustic spectrometers with NO₂.

Implications: Multispectral photoacoustic instruments are commonly used to measure aerosol and nitrogen dioxide (NO₂) light absorption coefficients to determine the radiation budget of the atmosphere. A 405-nm laser is often used in these multispectral photoacoustic instruments. Although NO₂ absorbs strongly at 405 nm, it also has a strong photolysis pathway that is accessible by light of the same wavelength. Photolysis reduces the photoacoustic signal, necessitating special care when interpreting photoacoustic measurements. This paper offers a method for the multispectral photoacoustic instrument user to quantify the influence of the 405-nm NO₂ photolysis effect on the photoacoustic signal.     

Delineating landfill leachate discharge to an arsenic contaminated waterway

Discharge of contaminated ground water may serve as a primary and on-going source of contamination to surface water. A field investigation was conducted at a Superfund site in Massachusetts, USA to define the locus of contaminant flux and support source identification for arsenic contamination in a pond abutting a closed landfill. Subsurface hydrology and ground-water chemistry were evaluated in the aquifer between the landfill and the pond during the period 2005-2009 employing a network of wells to delineate the spatial and temporal variability in subsurface conditions. These observations were compared with concurrent measures of ground-water seepage and surface water chemistry within a shallow cove that had a historical visual record of hydrous ferric oxide precipitation along with elevated arsenic concentrations in shallow sediments. Barium, presumably derived from materials disposed in the landfill, served as an indicator of leachate-impacted ground water discharging into the cove. Evaluation of the spatial distributions of seepage flux and the concentrations of barium, calcium, and ammonium-nitrogen indicated that the identified plume primarily discharged into the central portion of the cove. Comparison of the spatial distribution of chemical signatures at depth within the water column demonstrated that direct discharge of leachate-impacted ground water was the source of highest arsenic concentrations observed within the cove. These observations demonstrate that restoration of the impacted surface water body will necessitate control of leachate-impacted ground water that continues to discharge into the cove.     

Groundwater quality assessment of one former industrial site in Belgium using a TRIAD-like approach

Contaminated industrial sites are important sources of pollution and may result in ecotoxicological effects on terrestrial, aquatic and groundwater ecosystems. An effect-based approach to evaluate and assess pollution-induced degradation due to contaminated groundwater was carried out in this study. The new concept, referred to as “Groundwater Quality TRIAD-like” (GwQT) approach, is adapted from classical TRIAD approaches. GwQT is based on measurements of chemical concentrations, laboratory toxicity tests and physico-chemical analyses. These components are combined in the GwQT using qualitative and quantitative (using zero to one subindices) integration approaches. The TRIAD approach is applied for the first time on groundwater from one former industrial site located in Belgium. This approach will allow the classification of sites into categories according to the degree of contaminant-induced degradation. This new concept is a starting point for groundwater characterization and is open for improvement and adjustment.     

Distribution, fate and formation of non-extractable residues of a nonylphenol isomer in soil with special emphasis on soil derived organo-clay complexes

Anthropogenic contaminants like nonylphenols (NP) are added to soil, for instance if sewage-sludge is used as fertilizer in agriculture. A commercial mixture of NP consists of more than 20 isomers. For our study, we used one of the predominate isomers of NP mixtures, 4-(3,5-dimethylhept-3-yl)phenol, as a representative compound. The aim was to investigate the fate and distribution of the isomer within soil and soil derived organo-clay complexes. Therefore, (14)C- and (13)C-labeled NP was added to soil samples and incubated up to 180 days. Mineralization was measured and soil samples were fractionated into sand, silt and clay; the clay fraction was further separated in humic acids, fulvic acids and humin. The organo-clay complexes pre-incubated for 90 or 180 days were re-incubated with fresh soil for 180 days, to study the potential of re-mobilization of incorporated residues. The predominate incorporation sites of the nonylphenol isomer in soil were the organo-clay complexes. After 180 days of incubation, 22 % of the applied (14)C was mineralized. The bioavailable, water extractable portion was low (9 % of applied (14)C) and remained constant during the entire incubation period, which could be explained by an incorporation/release equilibrium. Separation of organo-clay complexes, after extraction with solvents to release weakly incorporated, bioaccessible portions, showed that non-extractable residues (NER) were preferentially located in the humic acid fraction, which was regarded as an effect of the chemical composition of this fraction. Generally, 27 % of applied (14)C was incorporated into organo-clay complexes as NER, whereas 9 % of applied (14)C was bioaccessible after 180 days of incubation. The re-mobilization experiments showed on the one hand, a decrease of the bioavailability of the nonylphenol residues due to stronger incorporation, when the pre-incubation period was increased from 90 to 180 days. On the other hand, a shift of these residues from the clay fraction to other soil fractions was observed, implying a dynamic behavior of incorporated residues, which may result in bioaccessibility of the NER of nonylphenol.     

Protected area planning to conserve biodiversity in an uncertain future

Protected areas are a key instrument for conservation. Despite this, they are vulnerable to risks associated with weak governance, land-use intensification, and climate change. We used a novel hierarchical optimization approach to identify priority areas for expanding the global protected area system that explicitly accounted for such risks while maximizing protection of all known terrestrial vertebrate species. To incorporate risk categories, we built on the minimum set problem, where the objective is to reach species distribution protection targets while accounting for 1 constraint, such as land cost or area. We expanded this approach to include multiple objectives accounting for risk in the problem formulation by treating each risk layer as a separate objective in the problem formulation. Reducing exposure to these risks required expanding the area of the global protected area system by 1.6% while still meeting conservation targets. Incorporating risks from weak governance drove the greatest changes in spatial priorities for protection, and incorporating risks from climate change required the largest increase (2.52%) in global protected area. Conserving wide-ranging species required countries with relatively strong governance to protect more land when they bordered nations with comparatively weak governance. Our results underscore the need for cross-jurisdictional coordination and demonstrate how risk can be efficiently incorporated into conservation planning. Planeación de las áreas protegidas para conservar la biodiversidad en un futuro incierto     

用LC-MS/MS方法筛查饮用水矿泉水和环境水中PPT级的165种农药

如今水环境中有机污染物对环境的影响已经远远超过以往.农业中广泛使用的农药往往会造成残留而污染土壤和地表水.目前,大多数水源都受到农药的污染,却仍然用于生产饮用水.     

PCB dechlorination hotspots and reductive dehalogenase genes in sediments from a contaminated wastewater lagoon

Polychlorinated biphenyls (PCBs) are a class of persistent organic pollutants that are distributed worldwide. Although industrial PCB production has stopped, legacy contamination can be traced to several different commercial mixtures (e.g., Aroclors in the USA). Despite their persistence, PCBs are subject to naturally occurring biodegradation processes, although the microbes and enzymes involved are poorly understood. The biodegradation potential of PCB-contaminated sediments in a wastewater lagoon located in Virginia (USA) was studied. Total PCB concentrations in sediments ranged from 6.34 to 12,700 mg/kg. PCB congener profiles in sediment sample were similar to Aroclor 1248; however, PCB congener profiles at several locations showed evidence of dechlorination. The sediment microbial community structure varied among samples but was dominated by Proteobacteria and Firmicutes. The relative abundance of putative dechlorinating Chloroflexi (including Dehalococcoides sp.) was 0.01–0.19% among the sediment samples, with Dehalococcoides sp. representing 0.6–14.8% of this group. Other possible PCB dechlorinators present included the Clostridia and the Geobacteraceae. A PCR survey for potential PCB reductive dehalogenase genes (RDases) yielded 11 sequences related to RDase genes in PCB-respiring Dehalococcoides mccartyi strain CG5 and PCB-dechlorinating D. mccartyi strain CBDB1. This is the first study to retrieve potential PCB RDase genes from unenriched PCB-contaminated sediments.     

Stratigraphic flux—A method for determining preferential pathways for complex sites

Experience with groundwater remediation over several decades has demonstrated that successful outcomes depend on quantitative conceptual site models (CSMs). Over the last 30 years, we have progressed from groundwater pump‐and‐treat remedies, which were largely designed based on a water supply perspective, to in situ and combined remedy strategies, which are only beginning to benefit from understanding the aquifer architecture and distribution of contaminant mass to assess plume maturity, mass flux, and more reliable means of fate and transport assessment. The U.S. Air Force funded the development of the Stratigraphic Flux approach to provide a framework for understanding contaminant transport pathways at its complex sites and enable more reliable and cost‐effective remediation. Stratigraphic Flux enables the development of quantitative, flux‐based CSMs that are founded in sequence stratigraphy, and high‐resolution hydraulic conductivity and contaminant distribution measurements. The result is a three‐dimensional graphical mapping of relative contaminant flux and classification of transport potential that is easy for all stakeholders to understand. The Stratigraphic Flux graphical model is based on a hydrofacies classification system that describes transport potential in three segments of the aquifer: transport zones—where the majority of groundwater flow occurs and transport rates are measured in feet per day; slow advection zones—where transport rates are measured in feet per year; and storage zones—where typically less than 1% of flow occurs, and diffusion dominates contaminant transport. The hydrofacies architectures are based on stratigraphy and transport potential is defined by grouping facies by orders of magnitude classes in hydraulic conductivity. By combining the hydrofacies architecture with contaminant concentration distributions, one can map relative contaminant flux to define and target the complex pathways that control contaminant transport and cleanup behavior. In this article, we describe the Stratigraphic Flux framework, focusing on the key information needed and the methods of analysis. We illustrate the results of its application to evaluate migration pathways for trichlorethylene and chromium at a former chrome pit at Air Force Plant 4 in Fort Worth, Texas. A comprehensive guidance document that describes the approach with a broad spectrum of tools and several site examples can be requested from the authors.     

Occupational exposure to pesticides and associated health effects among greenhouse farm workers

Environmental Science and Pollution Research - The number and production capacities of greenhouse farms have been increased across the globe, driven by an effort for addressing food security...