The effect of chloroquine, quinacrine, and metronidazole on both soybean plants and soil microbiota

Chloroquine, quinacrine, and metronidazole are used extensively for therapeutic purposes. Substantial quantities of these compounds end up in the environment. The potential effect of these compounds on soybean and on the protozoa in soil was assessed. The growth of soybean plants was affected by increasing concentrations of the chloroquine, metronidazole, and quinacrine dihydrochloride. The plants were particularly sensitive to low concentrations of metronidazole. The number of bacteria and protozoa in soil was either unchanged or increased in the presence of chloroquine and quinacrine. However, in the presence of only 0.5 mg metronidazole g(-1) soil, the density of protozoa in the rhizosphere was reduced by a 10-fold.     

Oryzalin fate and transport in runoff water in Mediterranean vineyards

An experimental study was conducted in a 91.4-ha Mediterranean vineyard catchment in southern France to characterize the fate and transport of oryzalin in runoff water and thus to assess the risk of contamination of surface waters. Oryzalin concentrations in soil were monitored on two fields, one no-till and one tilled from March 1998 to March 2000. Concentrations in solution and on solid phase of runoff water were measured at the outlets of both fields and the catchment. The droughts in the two summer periods reduced the dissipation of oryzalin and increased its field half-life up to 35 days. Consequently, oryzalin was detected throughout the year in runoff water, with maximum dissolved concentrations > 600 microg l(-1) at the field scale. Oryzalin transport essentially occurred in solution. At the no-till field, seasonal losses were 2.29% and 1.89% of the applied amount in 1998 and 1999, respectively. The corresponding values at the tilled field were 1.56% and 0.29%, since tillage reduced total losses by reducing surface runoff. At the catchment scale, oryzalin concentrations were smaller than those at the field scale, due to dilution effects and staggering of application. Large part of the overland flow from the fields reinfiltrated in the ditches before reaching the outlet of the catchment. As a result, seasonal oryzalin losses were <0.2% of the applied amount.     

Remediation of MTBE from drinking water: air stripping followed by off-gas adsorption

The widespread use of methyl tertiary butyl ether (MTBE) as an oxygenate in gasoline has resulted in the contamination of a large number of ground and surface water sources. Even though air stripping has been proven to be an effective treatment technology for MTBE removal, off-gas treatment often is required in conjunction with it. This study evaluated the combined treatment technologies of air stripping followed by off-gas adsorption on a pilot scale for the treatment of MTBE-contaminated water. The effect of air/water ratios on the treatment efficiency was studied, and the mass transfer coefficient was determined. Air/water ratios of 105:1, 151:1, 177:1, 190:1, 202:1, and 206:1 were used, and a treatment efficiency of >99% was achieved for all the runs conducted. The depth of packing required to achieve maximum treatment efficiency decreased with increasing air/water ratio. Relative humidity (RH) impacts on the MTBE adsorption capacity of a granular activated carbon (GAC) and carbonaceous resin were determined from pilot plant studies. Breakthrough profiles obtained from the pilot plant studies conducted at 20, 30, and 50% RH indicated that GAC has a higher adsorptive capacity than resin. The adsorptive capacity of GAC decreased with increasing RH, whereas RH did not impact the resin adsorptive capacity.     

A global assessment of adaptation investment from the perspectives of equity and efficiency

Equity and efficiency should be considered when allocating resources for climate change adaptation. More than a decade after the Least Developed Countries Fund approved adaptation funds for 18 countries in 2003, it is possible to take the stock of investment data and to test empirically whether equity and efficiency have been factored into adaptation investment decision-making. To evaluate equity, one must determine if resources were distributed to areas of greatest need. Vulnerability assessments provide information on the global distribution of the need for adaptation. To evaluate efficiency, one must compare cost and benefit of an investment. Although it is difficult to assess ex-ante the cost and benefit of investment strategies, it is possible to measure efficient use of expenditures with readiness assessment, as a metric of capacity to deploy adaptation resources. We used vulnerability and readiness measures of the Notre Dame Global Adaptation Initiative (ND-GAIN) Country Index as proxies of equity and efficiency. This article quantitatively interrogates—through the lens of public fund allocation—the roles of vulnerability and readiness in shaping adaptation investment decisions. Our findings suggest that countries facing increasing impacts from climate change have received more adaptation investments from international sources than countries with less vulnerability. Further, international investments also preferentially flow to countries that are more ready to deploy adaptation resources. Since the most vulnerable countries are likely to be less ready for investment, our findings support the efforts to improve the investment potential of the most vulnerable countries by investing first to enhance their readiness, in order to unlock adaptation solutions.     

Assessing the Impact of Carbon Tax Differentiation in the European Union

To what extent do the welfare costs associated with the implementation of the Burden Sharing Agreement in the European Union depend on sectoral allocation of emissions rights? What are the prospects for strategic climate policy to favor domestic production? This paper attempts to answer those questions using a CGE model featuring a detailed representation of the European economies. First, numerical simulations show that equalizing marginal abatement costs across domestic sectors greatly reduces the burden of the emissions constraint but also that other allocations may be preferable for some countries because of pre-existing tax distortions. Second, we show that the effect of a single country's attempt to undertake a strategic policy to limit impacts on its domestic energy-intensive industries has mixed effects. Exempting energy-intensive industries from the reduction program is a costly solution to maintain the international competitiveness of these industries; a tax-cum-subsidy approach is shown to be better than exemption policy to sustain exports. The welfare impact either policy – exemption or subsidy – on other European countries is likely to be small because of general equilibrium effects.     

Determination of VOCs in yellow eel from various inland water bodies in Flanders (Belgium)

Twenty freshwater eels caught in Flanders (Belgium) were analysed by GC-MS for a total of 52 VOCs. The most prominent VOCs are the BTEX and a number of chlorinated compounds such as chloroform and tetrachloroethene. The observed concentrations which, typically, were in the low ng/g wet weight range, could be linked to the major emission sources and the present study gives new evidence that combustion of fossil fuels is a major source of BTEX in the environment. The concentration levels in eels seem to be a reflection of the actual concentrations in their environment. For eels from the same location similar patterns and concentrations were observed, and the concentrations agree with what can be expected from those of the water column. Generally speaking, the observed concentrations do not seem to pose a threat for organisms. More definite statements will, however, require a larger dataset. The study suggests that the yellow eel can possibly be used as a biomonitor or sentinel organism for VOCs.     

Modified Whittaker plots as an assessment and monitoring tool for vegetation in a lowland tropical rainforest

Resource exploitation in lowland tropical forests is increasingand causing loss of biodiversity. Effective evaluation and management of the impacts of development on tropical forests requires appropriate assessment and monitoring tools. We proposethe use of 0.1-ha multi-scale, modified Whittaker plots (MWPs) to assess and monitor vegetation in lowland tropical rainforests.We established MWPs at 4 sites to: (1) describe and comparecomposition and structure of the sites using MWPs, (2) compare these results to those of 1-ha permanent vegetation plots (BDPs),and (3) evaluate the ability of MWPs to detect changes in populations (statistical power). We recorded more than 400 species at each site. Species composition among the sites was distinctive, while mean abundance and basal area was similar. Comparisons between MWPs and BDPs show that they record similarspecies composition and abundance and that both perform equallywell at detecting rare species. However, MWPs tend to record morespecies, and power analysis studies show that MWPs were more effective at detecting changes in the mean number of species of trees 10 cm in diameter at breast height (dbh) and in herbaceous plants. Ten MWPs were sufficient to detect a change of 11% in the mean number of herb species, and they were able to detect a 14% change in the mean number of species of trees 10 cm dbh. The value of MWPs for assessment and monitoringis discussed, along with recommendations for improving the sampling design to increase power.     

On the propagation of error in air pollution measurements

Four methods for estimating the uncertainties in air pollution measurements are outlined. The approaches are: analytical solution-approximation; application of distribution theory; experimentation; and simulation. The advantages and disadvantages of each method are illustrated using data from High-Volume air samplers, the instrument most commonly used for monitoring ambient concentrations of airborne particles.Dr Evans is Assistant Professor of Environmental Science and Mr Kinney is a doctoral candidate in the Department of Environmental Science and Physiology, Harvard School of Public Health. Dr Cooper is at the Manufacturing Research Laboratory, Thomas J. Watson Research Center, IBM, Yorktown Heights, NY.     

Reductive dechlorination of chlorofluorocarbons and hydrochlorofluorocarbons in sewage sludge and aquifer sediment microcosms

The reductive transformation of the 10 most-widely distributed fluorinated volatile compounds and of tetrachloroethene was investigated for up to 177 days under anaerobic conditions in sewage sludge and aquifer sediment slurries. Concentrations of parent compounds and of degradation products were identified by GC-MS. We observed transformation of CFC-11 to HCFC-21 and HCFC-31, of CFC-113 to HCFC-123a, chlorotrifluoroethene and trifluoroethene, of CFC-12 to HCFC-22, of HCFC-141b to HCFC-151b, and of tetrachloroethene to vinyl chloride and ethene. CFC-114, CFC-115, HCFC-142b, HFC-134a and HCFC-22 were not transformed. The results suggest that with both inocula studied here, hydrogenolysis is the primary reductive dechlorination reaction. CFC-113 was the only compound where a dichloro-elimination was observed, leading to the formation of chlorotrifluoroethene as temporal intermediate and to trifluoroethene as end product. The relative reduction rates of chlorofluoromethanes compared reasonably well with theoretical rates calculated based on thermochemical data according to the Marcus theory. Some of the accumulating HCFCs and haloethenes observed in this study are toxic and may be of practical relevance in anaerobic environments.     

The impact of a building implosion on airborne particulate matter in an urban community

In response to community concerns, the air quality impact of imploding a 22-story building in east Baltimore, MD, was studied. Time- and space-resolved concentrations of indoor and outdoor particulate matter (PM) (nominally 0.5-10 microm) were measured using a portable nephelometer at seven and four locations, respectively. PM10 levels varied in time and space; there was no measurable effect observed upwind of the implosion. The downwind peak PM10 levels varied with distance (54,000-589 microg/m3) exceeding pre-implosion levels for sites 100 and 1130 m 3000- and 20-fold, respectively. Estimated outdoor 24-hr integrated mass concentrations varied from 15 to 72 microg/m3. The implosion did not result in the U.S. Environmental Protection Agency (EPA) National Ambient Air Quality Standard (NAAQS) for PM10 being exceeded. X-ray fluorescence analysis indicated that the elemental composition was dominated by crustal elements: calcium (57%), silicon (23%), aluminum (7.6%), and iron (6.1%). Lead was above background but at a low level (0.17 microg/m3). Peak PM10 concentrations were short-lived; most sites returned to background within 15 min. No increase in indoor PM10 was observed even at the most proximate 250 m location. These results demonstrate that a building implosion can have a severe but short-lived impact on community air quality. Effective protection is offered by being indoors or upwind.