Environmental audits: Proposed terminology

This paper presents a review of the fast developing subject of environmental auditing with the authors proposing a series of definitions. Of particular concern is a move towards the development of an accepted vocabulary for environmental impact assessment, even though the international dimension of the subject makes this a difficult task. Use of the word audit has become an accepted part of EIA vocabulary, however there are several types of audits being undertaken today. Presently, there are no commonly accepted definitions, consequently this paper will attempts to address this issue. Definitions for seven types of environmental audits are suggested, derived from the experience of the authors and from a review of the current literature. It is hoped that by the presentation of these definitions that such terms will be advocated for future EIA work, and thereby reducing confusion that otherwise may occur. The paper concludes with a brief review of the status of auditing.     

Assessing land use impacts on flood processes in complex terrain by using GIS and modeling approach

A distributed hydrologic modeling and GIS approach is applied for the assessment of land use impact in the Steinsel sub-basin, Alzette, Grand-Duchy of Luxembourg. The assessment focuses on the runoff contributions from different land use classes and the potential impact of land use changes on runoff generation. The results show that the direct runoff from urban areas is dominant for a flood event compared with runoff from other land use areas in this catchment, and tends to increase for small floods and for the dry season floods, whereas the interflow from forested, pasture and agricultural field areas contributes to the recession flow. Significant variations in flood volume, peak discharge, time to the peak, etc., are found from the model simulation based on the three hypothetical land use change scenarios.     

Application of a checklist for quality assistance in environmental modelling to an energy model

Large, complex energy models present considerable challenges to develop and test. Uncertainty assessments of such models provide only partial guidance on the quality of the results. We have developed a model quality assistance checklist to aid in this purpose. The model checklist provides diagnostic output in the form of a set of pitfalls for the model application. The checklist is applied here to an energy model for the problem of assessing energy use and greenhouse gas emissions. Use of the checklist suggests that results on this issue are contingent on a number of assumptions that are highly value-laden. When these assumptions are held fixed, the model is deemed capable of producing moderately robust results of relevance to climate policy over the longer term. Checklist responses also indicate that a number of details critical to policy choices or outcomes on this issue are not captured in the model, and model results should therefore be supplemented with alternative analyses.     

Spatial contaminant heterogeneity: quantification with scale of measurement at contrasting sites

Material within the terrestrial environment is rarely homogeneously distributed, either spatially or temporally. One consequence of heterogeneity is that uncertainty is usually generated in measurements that are taken with the aim of characterising the environment. For example, a measurement of analyte concentration within soil taken from one sampling location on contaminated land can vary substantially when compared against another sample taken at effectively the same nominal location. The measurement uncertainty arising from the heterogeneity can substantially limit the reliability of the interpretations made upon environmental investigations. The sampling uncertainty usually outweighs the analytical uncertainty from the laboratory, often by a factor of 20 or more. One approach to reducing the uncertainty is to design a more suitable sampling strategy. This might be achieved by predicting the degree of heterogeneity prior to the investigation, but this is often difficult to achieve accurately. Another approach, which was investigated here, is to actually characterise the heterogeneity prior to the main investigation using rapid and inexpensive technology, such as in situ measurement techniques. In situ portable X-ray fluorescence (PXRF) and X-ray microprobe (XMP) techniques were employed to test the feasibility of this approach. Two contrasting contaminated land sites were chosen to characterise the two-dimensional spatial heterogeneity of heavy metal contamination in topsoil at a range of scales (50 m to 0.001 m). The spatial heterogeneity of contaminants, expressed as relative standard deviations, was found to differ between the two sites by a factor of two, largely due to the mode of deposition of pollution. The study also indicated that the heterogeneity did not change systematically with the scale of measurement between sampling locations at either site.     

Successful DNA-based prenatal exclusion of juvenile neuronal ceroid lipofuscinosis

A family with two siblings, 10 and 8 years old, both with clinical and ultrastructural evidence of juvenile neuronal ceroid lipofuscinosis is described. The family was found to be informative for the restriction fragment length polymorphisms (RFLPs) detected by the probes pCJ52–95Ml (locus D16S148) and pCJ52-94Tl (locus D16S159) flanking the juvenile neuronal ceroid lipofuscinosis locus, CLN3. The parents were both heterozygous using these probes, while their two children with juvenile neuronal ceroid lipofuscinosis were both homozygous. Chorionic villi analysis showed that the fetus was heterozygous and had inherited the one allele of the mother which was not found in the two siblings. This suggested that the fetus had derived one healthy allele from the mother, the risk for a double crossing-over being less than 1 per cent. Electron microscopy showed no fingerprint inclusions in chorionic villi. The child was investigated at 6 months of age and found to be healthy, as new fingerprint inclusions were found at electron microscopy and no vacuolated lymphocytes were found in the blood smear. Due to the risk of heterogeneity, both DNA-based analysis and electron microscopy on chorionic villi are recommended for prenatal examination for juvenile neuronal ceroid lipofuscinosis.     

A Simulation of Temporal and Spatial Variations in Carbon at Landscape Level: A Case Study for Lake Abitibi Model Forest in Ontario,Canada

Using a case study of the Lake Abitibi Model Forest (LAMF), this study aims to assess the temporal and spatial variability in carbon storage during 1990–2000, and to present a comprehensive estimation of the carbon budget for LAMF's ecosystems. As well, it provided the information needed by local forest managers to develop ecological and carbon-based indicators and monitor the sustainability of forest ecosystems. Temporal and spatial carbon dynamics were simulated at the landscape level using ecosystem model TRIPLEX1.0 and Geographical Information System (GIS). The simulated net primary productivity (NPP) and carbon storage in forest biomass and soil were compared with field data and results from other studies for Canada's boreal forests. The results show that simulated NPP ranged from 3.26 to 3.34 tC ha⁻¹ yr⁻¹ in the 1990s and was consistent with the range measured during the Boreal Ecosystem-Atmosphere Studies (BOREAS) in central Canada. Modeled NPP was also compared with the estimation from remote sensing data. The density of total above-and belowground biomass was 125.3, 111.8, and 106.5 tC ha⁻¹ for black spruce, trembling aspen, and jack pine in the LAMF ecosystem, respectively. The total carbon density of forested land was estimated at 154.4 tC ha⁻¹ with the proportion of 4:6 for total biomass and soil. The analysis of net carbon balance of ecosystem suggested that the LAMF forest ecosystem was acting as a carbon sink with an allowable harvest in the 1990s.     

Relationship between abundance of rodents and damage to agricultural crops

Developing a relationship between pest abundance and damage to crops is essential for the calculation of economic injury levels (EIL) leading to informed management decisions. The crop modelling framework, APSIM, was used to simulate the impact of mouse damage on yield loss on wheat where a long-term dataset on the density of mice was available (1983–2003). The model was calibrated using results from field trials where wheat plants were hand clipped to imitate mouse damage. The grazing effect of mice was estimated using the population density, daily intake per mouse and the proportion of wheat grain and plant tissue in the diet to determine yield loss. The mean yield loss caused by mice was 12.4% (±5.4S.E.; range −0.5 to 96%). There were 7/21 years when yield loss was >5%. A damage/abundance relationship was constructed and a sigmoidal curve explained 97% of variation when accounting for different trajectories of mouse densities from sowing to harvest. The majority of damage occurred around emergence of the crop when mouse densities were >100 mice ha⁻¹. This is the first time that field data on mouse density and a crop simulation model have been combined to estimate yield loss. The model examines the efficacy of baiting and how to estimate EILs. Because the broadscale application of zinc phosphide is cheap and effective, the EIL is very low (<1% yield loss). The APSIM model is highly flexible and could be used for other vertebrate pests in a range of crops or pastures to develop density/damage relationships and to assist with management.