Relationships between water mass characteristics and estimates of fish population abundance from trawl surveys

The Canadian Department of Fisheries and Oceans conducts annual bottom trawl surveys to monitor changes in the abundance of the major commercially important groundfish populations. Some of these surveys have been in operation for almost 20 yr. The estimates from these surveys often indicate rapid changes in abundance over time beyond that expected from the population dynamics of the fish. Much of this interannual change has been interpreted as variation, the magnitude of which has often made it difficult to measure anything but the most severe effects of fishing, pollution or any other intervention on the population. Recent studies have shown that some of this variation may be attributed to changes in catchability of fish due to the effects of environmental variables on fish distribution. Annual changes in abundance as estimated from such field surveys may be confounded by changes in catchability due to annual changes in environmental conditions. In this study, trawl catches of age 4 Atlantic cod (Gadus morhua) from surveys conducted during March 1979–1988 were compared with concurrent measurements of bottom salinity, temperature and depth. Large catches of age 4 cod are more likely to occur in water characterized as the intermediate cold layer defined by salinities of 32–33.5 and temperatures<5°C. This relationship also appears to be modified by depth. We further show that internnual changes in the estimated abundance from the surveys were, in a number of cases, coincident with changes in the proportion of the bottom water composed of the intermediate cold water layer. The implications that these patterns may have on interpreting trends in the estimates of abundance from trawl surveys are discussed.     

Introduction: General versus specific measures and the special case of core self‐evaluations

This paper introduces a Journal of Organizational Behavior point/counterpoint exchange (this issue) that focuses on the appropriate level of aggregation primarily in the assessment of personality in general and core self‐evaluations (CSE) in particular. Gilad Chen reviews arguments for and against the higher‐order construct of CSE, offering a number of recommendations for strengthening it. Timothy Judge and John Kammeyer‐Mueller offer a defense of CSE, and then extend the discussion to the measurement of other constructs beyond the personality domain. Together these two papers provide important insights about the appropriate level of aggregation of individual measures, and situations in which higher‐order versus lower‐order measures might be preferred. Copyright © 2011 John Wiley & Sons, Ltd.     

Gender differences and demographic influences in perceived concern for driver safety and support for impaired driving countermeasures

IntroductionDriving safety, impaired driving, and legislation to address these concerns remain important issues. It is imperative countermeasures be targeted toward the most appropriate groups. This paper explores the potential relationship between gender and driving attitudes toward safety issues and impaired-driving countermeasures.MethodThe data are from the 2007 Impaired Driving Survey commissioned by Transport Canada and Mothers Against Drunk Driving (MADD) Canada. The survey is a, stratified by region, telephone survey of 1,514 Canadian drivers 18 years of age and older with a valid driver's license who had driven within the past 30 days.ResultsThe findings illustrate a consistent impact of gender on these issues. Other variables were also identified as relevant factors although less consistently. Current findings suggest that strategies for building support for interventions, or for changing risk perception/concern for risky driving behaviors should be tailored by gender to maximize the potential for behavior change.ImpactThis information may assist program and policy developers through the identification of more or less receptive target groups. Future research directions are also presented.     

Fugitive emissions in chemical processes: The assessment and prevention based on inherent and add-on approaches

Fugitive emissions are among the major concerns of industrial process releases. The emissions cause problem to various aspects including the environment, health, and economic. Early evaluation of process hazards is beneficial because process can be made inherently benign at lower cost. This paper discusses two important aspects of fugitive emissions assessment during process design – the quantification and the prevention strategies.For the quantification part, three methods are presented for fugitive emissions estimation during the process design. They are tailored to data available in simple process flow diagram (PFD), detailed PFD, and piping & instrumentation diagram (PID). Such methods are needed as early emissions estimation allows production routes and process designs with lower emissions to be selected. The fugitive emissions estimation and methods to abatement are demonstrated on a benzene process case study. Valves are found to be the major emission source with 50% of fugitive emissions of process area in a base case of petrochemical process, in which no fugitive emission reductions are yet made. Pumps without mechanical seals come second with 30% and flanges with 8% of emissions. Inherently safer design keywords can be applied to prevent fugitive emissions in the process plants. Substitution is the most applicable keyword in fugitive emission reduction of existing plants.The emission rate calculations together with estimation of health risk give a sound background for the decision making on elimination of emissions at source through equipment and piping changes. The case study presented reveals that by substituting emission prone components by inherently low-leaking ones, the plant emissions can be reduced over 90% in practice. This is created mainly by replacing rising stem valves with ball valves, installing double mechanical pump seals or hermetic pumps and making changes in sampling and relief systems. Ideally by also changing flanges to welded connections, which is not viable for various reasons, the emissions could be reduced nearly to zero.     

HAZOP study training from the 1970s to today

An account is given of HAZOP study training from the simple methods used initially to modern methods such as e-learning courses. An especial mention is given to the role of Trevor Kletz in initiating public courses.     

Effect of multi-factors interaction on trace lead equilibrium during municipal solid waste incineration

The thermodynamic equilibrium of trace lead during the waste incineration was calculated on the basis of the minimization of the total Gibbs energy. The effect of incineration condition and MSW components on Pb distribution was investigated mainly in the view of the interaction of related elements. In the oxygen-rich condition, incineration temperature affects Pb distribution by the interaction of Cl, Ca and Na. In the fuel-rich condition, incineration temperature affects Pb distribution directly by the thermal transition of PbS(s) to PbCl(g) and the thermal transition of PbCl(g) to Pb(g). Air ratio has significant effect on Pb distribution by the interaction of H, O and Cl. The liberated Cl in oxidizing condition is far less than that in reducing condition. Na has the top priority to bond with Cl, than Ca only at low temperature and H only at high temperature, so the effect of Cl on Pb distribution depends on the content of Na and Ca. S promotes Pb volatilization by the interaction with Na in oxygen-rich and chlorine-poor condition and depresses Pb volatilization by the formation of PbS(s) directly without interaction with other elements in fuel-rich condition.     

Path analysis of factors influencing household solid waste generation: a case study of Xiamen Island,China

Comprehensive study of the factors influencing household solid waste (HSW) generation is crucial and fundamental for exploring the generation mechanism and forecasting future dynamics of HSW. A case study of Xiamen Island, China was employed to reveal the direct and indirect effects of demographic/socioeconomic factors on solid waste generation at the urban household scale. Based on a face-to-face questionnaire and two-stage survey of solid waste generation, a path analysis model was built. Results showed that the proposed path model exhibited good fit indices. Family size and dinning-at-home rate (DR), whose coefficients were ?0.40 and 0.43, respectively, were the two major factors influencing HSW directly. Moreover, family size, education level, employment rate and age structure played different degrees of indirect effects on HSW generation through respective paths, which should not be ignored. In terms of total effects, coefficients of family size, DR and employment rate were ?0.46, 0.43 and ?0.37, respectively, which were three most dominant factors influencing HSW generation. As for waste composition, organic waste was the most representative of HSW dynamics, and was the most sensitive to impact by the factors studied. Quantitative results of this study have important policy implications for sustainable municipal solid waste management.     

Recycling of combined coal-biomass ash from electric power plant waste as a cementitious material: characteristics and improvement

Combined coal-biomass ash has an enormous impact on environmental quality near electric power plants. This paper describes an alternative to disposal in which the ash is used to produce cementitious materials. Ash was obtained from combustion of coal and biomass containing four mass ratios of anthracite, bitumen, rice husks, and eucalyptus bark. The cement-forming properties were systematically characterized including compressive strength development, durability, and expansion in water. The ash samples were ground to increase the specific surface area, and then used to partially replace ASTM Type I Portland cement in mixtures containing 15, 30, or 45 % ash by mass. The water-binder material's (Portland cement with or without combined coal-biomass ash) ratios (w/c) were held constant at 45, 55, or 65 % by mass. Types A, B, and D ash behaved similarly, while the properties of type C ash were slightly different. Increasing the ash fraction in Portland cement mixtures increased the water requirement and resulted in lower compressive strength. Thorough mechanical grinding reduced the porosity and significantly enhanced the material properties.