Soil phytoremediation from the breakdown products of the chemical warfare agent, yperite

A plant-based bioremediation (phytoremediation) strategy has been developed and shown to be effective for the clean-up of soil contaminated by the breakdown products of the chemical warfare agent (CWA), yperite. The method involves exploiting the plant growth hormone, indole-3-acetic acid (IAA), to intensify the phytoremediation. For determination of the yperite breakdown products, gas chromatography is used. Soil and plant samples were analysed with a gas chromatograph fitted with an atomic emission detector. The method of standard-free determination was employed to identify sulphur-containing substances (SCSs). A series of soil tests was conducted, which showed that the level of SCSs decreased 4, 8, and more than 20-fold compared with that found in contaminated soil. This decrease was dependent upon the IAA concentrations used for plant treatment. The treated plants accumulated 2.7 to 2.9-fold larger amounts of the SCSs than did the untreated plants. Owing to its simplicity, environmental safety and inexpensiveness, the method can be recommended for the restoration of soil fertility in areas of storage and destruction of blister CWAs.     

Mobilization of small DNAPL pools formed by capillary entrapment

We performed an experimental study to quantify the critical conditions for the mobilization of small pools of dense nonaqueous phase liquids (DNAPLs) that may form at capillary-heterogeneity boundaries. A series of experiments were conducted in columns packed with uniform sands arranged to create capillary heterogeneities. DNAPL pools readily formed in these packings and were more easily mobilized than trapped DNAPL ganglia. A model was developed to describe the critical conditions for DNAPL pool mobilization. Pool mobilization was expected when a dimensionless pool trapping number N(T)p> 1 while mobilization was observed in our experiments when N(T)p>0.76+/-0.16 (+/- 95% confidence interval). The difference between the model prediction and the experimental observations was attributed to experimental error. Using this model for DNAPL pool mobilization, a simple numerical experiment was conducted to illustrate use of the model and to explore the effect of scale on the critical conditions for pool mobilization. With an increase in system scale flow bypassing around the DNAPL pool increased and the system-averaged conditions for the onset of mobilization changed: a greater system-average Darcy flux or lower interfacial tensions were required for DNAPL pool mobilization. This result illustrates the importance of system scale on mobilization of DNAPL pools in systems with capillary heterogeneities.     

In vitro EROD induction equivalency factors for the 10 PAHs generally monitored in risk assessment studies in The Netherlands

The ethoxy resorufin dealkylase (EROD) inducing potency of 10 polycyclic aromatic hydrocarbons (PAHs) is measured in the H4IIE in vitro bioassay and the results are compared to those reported in literature. The selected PAHs varied considerably in their potency to induce EROD activity. Anthracene (Ant) and phenanthrene (Phe) showed consistently no response. Naphthalene (Nap) showed no or a very weak response on EROD activity. Fluoranthene (Fla) and benzo[g,h,i]perylene (BghiP) showed weak responses at the highest doses. The other PAHs, including indeno[1,2,3-cd]pyrene (IP), benz[a]anthracene (BaA), benzo[a]pyrene (BaP), chrysene (Chr) and benzo[k]fluoranthene (BkF), showed full bell shaped dose-response curves. BaP EROD induction equivalency factors (BaP-1EF) were calculated and increased in the order Ant approximately Phe < Fla < Nap < BghiP < IP < BaA < BaP < Chr < BkF. Comparison of BaP-IEFs based on 50% effect concentration (EC50) or lowest effect concentration (LEC), yielded a significant relationship between both methods described by the equation log(BaPIEF(EC50) = 0.55 x log(BaPIEF(LEC)) + 0.07 (r2 = 0.913). BaP-IEFs as derived from our measurements and as reported in literature and measured in other in vitro assays deviated up to a factor of 17 among the different studies, but the potency rankings were comparable. For the PAH mixture as on average present in the human diet an overall tetrachlorodibenzo-p-dioxin (TCDD)-IEF of 1 x 10(-4) was estimated. The total PAH based TCDD induction equivalents (IEQ) intake then was calculated 300 pg/day, which is approximately 2 times higher then the PHAH based TCDD-EQ intake reported for humans.     

Transport and dispersion during wintertime particulate matter episodes in the San Joaquin Valley, California

Data analysis and modeling were performed to characterize the spatial and temporal variability of wintertime transport and dispersion processes and the impact of these processes on particulate matter (PM) concentrations in the California San Joaquin Valley (SJV). Radar wind profiler (RWP) and radio acoustic sounding system (RASS) data collected from 18 sites throughout Central California were used to estimate hourly mixing heights for a 3-month period and to create case studies of high-resolution diagnostic wind fields, which were used for trajectory and dispersion analyses. Data analyses show that PM episodes were characterized by an upper-level ridge of high pressure that generally produced light winds through the entire depth of the atmospheric boundary layer and low mixing heights compared with nonepisode days. Peak daytime mixing heights during episodes were -400 m above ground level (agl) compared with -800 m agl during nonepisodes. These episode/nonepisode differences were observed throughout the SJV. Dispersion modeling indicates that the range of influence of primary PM emitted in major population centers within the SJV ranged from -15 to 50 km. Trajectory analyses revealed that little intrabasin pollutant transport occurred among major population centers in the SJV; however, interbasin transport from the northern SJV and Sacramento regions into the San Francisco Bay Area (SFBA) was often observed. In addition, this analysis demonstrates the usefulness of integrating RWP/RASS measurements into data analyses and modeling to improve the understanding of meteorological processes that impact pollution, such as aloft transport and boundary layer evolution.     

Hydrogen sulfide generation in simulated construction and demolition debris landfills: impact of waste composition

Hydrogen sulfide (H2S) generation in construction and demolition (C&D) debris landfills has been associated with the biodegradation of gypsum drywall. Laboratory research was conducted to observe H2S generation when drywall was codisposed with different C&D debris constituents. Two experiments were conducted using simulated landfill columns. Experiment 1 consisted of various combinations of drywall, wood, and concrete to determine the impact of different waste constituents and combinations on H2S generation. Experiment 2 was designed to examine the effect of concrete on H2S generation and migration. The results indicate that decaying drywall, even alone, leached enough sulfate ions and organic matter for sulfate-reducing bacteria (SRB) to generate large H2S concentrations as high as 63,000 ppmv. The codisposed wastes show some effect on H2S generation. At the end of experiment 1, the wood/drywall and drywall alone columns possessed H2S concentrations > 40,000 ppmv. Conversely, H2S concentrations were < 1 ppmv in those columns containing concrete. Concrete plays a role in decreasing H2S by increasing pH out of the range for SRB growth and by reacting with H2S. This study also showed that wood lowered H2S concentrations initially by decreasing leachate pH values. Based on the results, two possible control mechanisms to mitigate H2S generation in C&D debris landfills are suggested.     

A comparison of polycyclic aromatic hydrocarbon and petroleum hydrocarbon uptake by mussels (Perna viridis) and semi-permeable membrane devices (SPMDs) in Hong Kong coastal waters

The ability of mussels (Perna viridis) and semi-permeable membrane devices (SPMDs) to accumulate polycyclic aromatic hydrocarbons (PAHs) and petroleum hydrocarbons (PHCs) from five sites in Hong Kong's coastal waters was compared. Mussels consistently had higher levels of contaminants, but their utility was limited at one highly polluted site due to mortality. Mussels and SPMDs ranked sites differently in terms of individual contaminant levels. Although SPMDs overcome many of the disadvantages of using living organisms to measure contaminants in marine waters, they cannot be used as "mimics" due to different PAH and PHC accumulation patterns.     

Black carbon: the reverse of its dark side

The emission of black carbon is known to cause major environmental problems. Black carbon particles contribute to global warming, carry carcinogenic compounds and cause serious health risks. Here, we show another side of the coin. We review evidence that black carbon may strongly reduce the risk posed by organic contaminants in sediments and soils. Extremely efficient sorption to black carbon pulls highly toxic polycyclic aromatic hydrocarbons, polychlorinated biphenyls, dioxins, polybrominated diphenylethers and pesticides into sediments and soils. This increased sorption is general, but strongest for planar (most toxic) compounds at environmentally relevant, low aqueous concentrations. Black carbon generally comprises about 9% of total organic carbon in aquatic sediments (median value of 300 sediments), and then may reduce uptake in organisms by up to two orders of magnitude. This implies that current environmental risk assessment systems for these contaminants may be unnecessarily safe.     

An overview of experimental results and dispersion modelling of nanoparticles in the wake of moving vehicles

Understanding the transformation of nanoparticles emitted from vehicles is essential for developing appropriate methods for treating fine scale particle dynamics in dispersion models. This article provides an overview of significant research work relevant to modelling the dispersion of pollutants, especially nanoparticles, in the wake of vehicles. Literature on vehicle wakes and nanoparticle dispersion is reviewed, taking into account field measurements, wind tunnel experiments and mathematical approaches.Field measurements and modelling studies highlighted the very short time scales associated with nanoparticle transformations in the first stages after the emission. These transformations strongly interact with the flow and turbulence fields immediately behind the vehicle, hence the need of characterising in detail the mixing processes in the vehicle wake. Very few studies have analysed this interaction and more research is needed to build a basis for model development. A possible approach is proposed and areas of further investigation identified.