Chloroethene dechlorination in acidic groundwater: Implications for combining fenton's treatment with natural attenuation

A sulfuric acid leak in 1988 at a chloroethene‐contaminated groundwater site at the Naval Air Station Pensacola has resulted in a long‐term record of the behavior of chloroethene contaminants at low pH and a unique opportunity to assess the potential impact of source area treatment technologies, which involve acidification of the groundwater environment (e.g., Fenton's‐based in situ chemical oxidation), on downgradient natural attenuation processes. The greater than 75 percent decrease in trichloroethene (TCE) concentrations and the shift in contaminant composition toward predominantly reduced daughter products (dichloroethene [DCE] and vinyl chloride [VC]) that were observed along a 30‐m groundwater flow path characterized by highly acidic conditions (pH = 3.5 ± 0.4) demonstrated that chloroethene reductive dechlorination can continue to be efficient under persistent acidic conditions. The detection of Dehalococcoides‐type bacteria within the sulfuric acid/chloroethene co‐contaminant plume was consistent with biotic chloroethene reductive dechlorination. Microcosm studies conducted with ¹⁴C‐TCE and ¹⁴C‐VC confirmed biotic reductive dechlorination in sediment collected from within the sulfuric acid/chloroethene co‐contaminant plume. Microcosms prepared with sediment from two other locations within the acid plume, however, demonstrated only a limited mineralization to ¹⁴CO₂ and ¹⁴CO, which was attributed to abiotic degradation because no significant differences were observed between experimental and autoclaved control treatments. These results indicated that biotic and abiotic mechanisms contributed to chloroethene attenuation in the acid plume at NAS Pensacola and that remediation techniques involving acidification of the groundwater environment (e.g., Fenton's‐based source area treatment) do not necessarily preclude efficient chloroethene degradation. © 2007 Wiley Periodicals, Inc.     

Moderation of dust explosions

Inherent safety is a proactive approach to process safety in which hazards are removed or minimized so as to reduce risk without engineered (add-on) or procedural intervention. Four basic principles are available to attain an inherently safer design—minimization, substitution, moderation, and simplification. The subject of the current paper is the principle of moderation as it applies to the prevention and mitigation of dust explosions.

Moderation can be achieved by processing a material under less severe operating conditions or by processing the material in a less hazardous form. With respect to the latter approach, it may be possible to alter the composition of a dust by admixture of solid inertants, or to increase the dust particle size so as to decrease its reactivity. Additionally, avoidance of the formation of hybrid mixtures of explosible dusts and flammable gases is an application of moderation of the material hazard.

Several examples are given for each of the above three forms of moderation. The discussion on admixture of solid inertants includes examples from the following industrial applications: (i) refractory materials manufacturing, (ii) food processing, (iii) power generation, (iv) industrial recycling, and (v) foundry shell mold fabrication. The importance of particle size consideration is explained first from the perspective of engineering tools such as the Dow Fire & Explosion Index, and professional guidance on the definition of a dust and suitable particle sizes for explosibility testing. Industrial examples are then drawn from the following areas: (i) rubber recycling and textile manufacturing, (ii) industrial recycling, (iii) wood processing, (iv) dry additive handling (polyethylene facility), (v) polyethylene production, (vi) carbon block recycling, and (vii) coal mining. The concluding discussion on hybrid mixtures includes brief cases from the process safety literature.     

Snowmobile impact on old field and marsh vegetation in Nova Scotia,Canada: An experimental study

A study was carried out in Nova Scotia, Canada, to experimentally assess the effect of snowmobiles on old field and marsh vegetation. Snowmobile treatments ranging from a single pass to 25 passes (five passes on five separate days) were administered. The first pass by a snowmobile caused the greatest increase in snow compaction-roughly 75% of that observed after five sequential passes. Snowmobile treatment resulted in highly significant increases in snow retention in spring. Frequency was more important than intensity in this regard.Standing crop and species composition were measured the following summer. Standing crop in the field showed a significant reduction with increasing snowmobile use; frequency of treatment (p < 0.01) was more important than intensity (p = 0.125).Stellaria graminea, Aster cordifolius, Ranunculus repens, andEquisetum arvense all showed significant (p < 0.05) differences in percent cover resulting from the treatment. Marginally significant changes were observed inAgrostis tenuis andPhleum pratense Marsh vegetation showed no significant effects of snowmobile treatment. This may have been because of solid ice cover during the winter.The literature is critically reviewed. It is concluded that snowmobile use can have a highly significant effect upon natural vegetation. Management suggestions are made.     

IMPROVING IRRIGATION RETURN FLOW QUALITY WITH A WATER RENTAL MARKET1

ABSTRACT: Current policies for correcting the problem of irrigation return flow pollution tend to attack the symptoms of the problem, rather than its cause. The present institutional arrangement for allocating irrigation water is seen as the source of the problem. This paper examines the water quality benefits of altering the institutional arrangement to allow for irrigation water transfers through a rental market. It is conceptualized that by creating a water rental market an opportunity cost would be associated with the use of irrigation water such that profit maximizing farmers would be induced to use his water supply more efficiently and rent the surplus to other irrigators, thus reducing return flow pollution. It is shown that a water rental market could increase water quality in the Yakima River in southcentral Washington by 31 percent as well as increase farm incomes and crop production.     

Organizational and Political Considerations in the Municipal Development of Small Hydropower1

ABSTRACT: The potential for hydroelectric power development at existing dams is great in oil dependent New England where there are over 10,000 dams presently in existence. Over 400 developments have been proposed in the region, the majority of which are small scale, and do not have major environmental impacts. Nevertheless, a variety of constraints may hinder development. A study of three efforts by municipalities in unique positions to develop hydropower reveals that organizational and political considerations are significant factors affecting development. Successful hydropower development requires: (1) the cooperation and interaction of citizens, government, and the private sector; (2) community interest and education; and (3) strong resolve.     

Integrating energy efficiency performance in production management – gap analysis between industrial needs and scientific literature

For governments and for manufacturing companies, global warming, rising energy prices, and customers’ increasing ecological awareness have pushed energy efficient manufacturing to the top of the agenda. Governments and companies are both striving to identify the most effective measures to increase energy efficiency in manufacturing processes. Based on results of a recent EU-funded roadmapping project, this paper highlights the needs of industrial companies for integrating energy efficiency performance in production management. First, it analyses concepts and tools for measurement, control and improvement of energy efficiency in production management proposed in literature. Second, the paper outlines that ICT tools and standardization are important enablers for energy efficient manufacturing. Third, industrial needs in these areas are presented based on expert interviews. The industrial needs thus identified are contrasted with concepts proposed in literature to point out the implementation gaps between practice and theory. The paper demonstrates that there exists a gap between the solutions available and the actual implementation in industrial companies. It concludes by deriving requirements for energy management in production that future collaborative research projects should address.     

Assessment of the environmental profile of PLA,PET and PS clamshell containers using LCA methodology

Life cycle assessments of bio-based polymer resin and products historically have shown favorable results in terms of environmental impacts and energy use compared to petroleum-based products. However, calculation of these impacts always depends on the system and boundary conditions considered during the study. This paper reports a cradle-to-cradle Life Cycle Assessment (LCA) of poly(lactic acid) (PLA) in comparison with poly(ethylene terephthalate) (PET) and poly(styrene) (PS) thermoformed clamshell containers, used for packaging of strawberries with emphasis on different end-of-life scenarios. It considers all the inputs such as fertilizers, pesticides, herbicides and seed corn required for the growing and harvesting of corn used for manufacturing PLA. For PET and PS, the extraction of crude oil and the entire cracking processes from crude oil through styrene and ethylene glycol and terephathalic acid are considered. Global warming, aquatic acidification, aquatic eutrophication, aquatic ecotoxicity, ozone depletion, non-renewable energy and respiratory organics, land occupation and respiratory inorganics were the selected midpoint impact categories. The geographical scope of the study reflects data from Europe, North America and the Middle East. PET showed the highest overall values for all the impact categories, mainly due to the higher weight of the containers. The main impacts to the environment were the resin production and the transportation stage of the resins and containers. This implies that the transportation stage of the package is an important contributor to the environmental impact of the packaging systems, and that it cannot be diminished.     

Incorporating Uncertainty into Management Models for Marine Mammals

Abstract: Good management models and good models for understanding biology differ in basic philosophy. Management models must facilitate management decisions despite large amounts of uncertainty about the managed populations. Such models must be based on parameters that can be estimated readily, must explicitly account for uncertainty, and should be simple to understand and implement. In contrast, biological models are designed to elucidate the workings of biology and should not be constrained by management concerns. We illustrate the need to incorporate uncertainty in management models by reviewing the inadequacy of using standard biological models to manage marine mammals in the United States. Past management was based on a simple model that, although it may have represented population dynamics adequately, failed as a management tool because the parameter that triggered management action was extremely difficult to estimate for the majority of populations. Uncertainty in parameter estimation resulted in few conservation actions. We describe a recently adopted management scheme that incorporates uncertainty and its resulting implementation. The approach used in this simple management scheme, which was tested by using simulation models, incorporates uncertainty and mandates monitoring abundance and human-caused mortality. Although the entire scheme may be suitable for application to some terrestrial and marine problems, two features are broadly applicable: the incorporation of uncertainty through simulations of management and the use of quantitative management criteria to translate verbal objectives into levels of acceptable risk.