GIS‐BASED HYIROLOGIC MODELING OF RIPARIAN AREAS: IMPLICATIONS FOR STREAM WATER QUALITY1

ABSTRACT: Riparian buffers have potential for reducing excess nutrient levels in surface water. Spatial variation in riparian buffer effectiveness is well recognized, yet researchers and managers still lack effective general tools for understanding the relevance of different hydrologic settings. We present several terrain‐based GIS models to predict spatial patterns of shallow, subsurface hydrologic flux and riparian hydrology. We then link predictions of riparian hydrology to patterns of nutrient export in order to demonstrate potential for augmenting the predictive power of land use/land cover (LU/LC) maps. Using predicted hydrology in addition to LUILC, we observed increases in the explained variation of nutrient exports from 290 sites across Lower Michigan. The results suggest that our hydrologic predictions relate more strongly to patterns of nutrient export than the presence or absence of wetland vegetation, and that in fact the influence of vegetative structure largely depends on its hydrologic context. Such GIS models are useful and complimentary tools for exploring the role of hydrologic routing in riparian ecosystem function and stream water quality. Modeling efforts that take a similar GIS approach to material transport might be used to further explore the causal implications of riparian buffers in heterogeneous watersheds.     

ISOTOPIC EVALUATION OF Pb OCCURRENCES IN THE RIVERINE ECOSYSTEMS OF THE KANKAKEE WATERSHED,ILLINOIS‐INDIANA1

ABSTRACT: Environmental background levels of Pb were measured in ponds, river waters, sediments, suspended sediments, rocks, and air particulates within the Kankakee watershed during the period of 1995 to 1999. Stable isotopic Pb distinguished airborne Pb and its incorporation into riverine wetland sediments from geogenic Pb measured in river sediments. The provenance of the naturally‐occurring Pb is from carbonate bedrock and contributes comparable concentrations in riverbank sediments (25.9–30.4 mg kg^?1) as Pb found in wetland sediments (18.6–24.8 mg kg^?1). Estimates of anthropogenic Pb contributions from airfall into the Kankakee wetlands were found to be near 0.43–0.71 Bq cm^?2 yr^?1 during 1995 to 1999. While leachable Pb data suggests the uppermost layers of pond sediments were disturbed, ²¹⁰Pb analyses from undisturbed sedimentation suggests Pb‐bearing sediments accumulate approximately 0.46–0.51 cm yr^?1 in the ponds within the riparian zones. Transboundary Pb pollution from aerosols of industrial Pb across the Great Lakes occurs, but Pb isotopy indicates that the Pb concentrations are comparable to natural concentrations of Pb in both waters and sediments within the Kankakee watershed.     

Full‐scale in‐situ biobarrier demonstration for containment and treatment of MTBE

The Naval Facilities Engineering Service Center (NFESC), Arizona State University, and Equilon Enterprises LLC are partners in an innovative Environmental Security Technology Certification Program cleanup technology demonstration designed to contain dissolved MTBE groundwater plumes. This full‐scale demonstration is being performed to test the use of an oxygenated biobarrier at Naval Base Ventura County, in Port Hueneme, California. Surprisingly, few cost‐effective in‐situ remedies are known for the cleanup of MTBE‐impacted aquifers, and remediation by engineered in‐situ biodegradation was thought to be an unlikely candidate just a few years ago. This project demonstrates that MTBE‐impacted groundwater can be remediated in‐situ through engineered aerobic biodegradation under natural‐flow conditions. With respect to economics, the installation and operation costs associated with this innovative biobarrier system are at least 50 percent lower than those of a conventional pump and treat system. Furthermore, although it has been suggested that aerobic MTBE biodegradation will not occur in mixed MTBE‐BTEX dissolved plumes, this project demonstrates otherwise. The biobarrier system discussed in this article is the largest of its kind ever implemented, spanning a dissolved MTBE plume that is over 500 feet wide. This biobarrier system has achieved an in‐situ treatment efficiency of greater than 99.9 percent for dissolved MTBE and BTEX concentrations. Perhaps of greater importance is the fact that extensive performance data has been collected, which is being used to generate best‐practice design and cost information for this biobarrier technology. © 2001 John Wiley & Sons, Inc.     

INTEGRATING DEMOGRAPHIC AND LANDSAT (TM) DATA AT A WATERSHED SCALE1

ABSTRACT: Recurrent calls for integrated resource management urge that an understanding of human activities and populations be incorporated into natural resource research, management, and protection efforts. In this paper, we hypothesize that watersheds can be a valuable geography for organizing an inquiry into the relationship between humans and the environment, and we present a framework for conducting such efforts. The framework is grounded in the emerging field of landscape ecology and incorporates demographic theory and data. Demography has been advanced by technological capabilities associated with the 1990 Census. Employing Geographic Information System (GIS) tools, we couple Landsat Thematic Mapper (TM) land cover data with census‐derived housing density data to demonstrate the operation of our framework and its utility for better understanding human‐landscape interactions. In our investigation of the Kickapoo Watershed and two sub‐ watersheds, located in southwestern Wisconsin, we identify relationships between landscape composition and the distribution and social structure of human populations. Our findings offer insight into the interplay between people and biophysical systems.     

Optimizing dispersal corridors for the Cape Proteaceae using network flow

We introduce a new way of measuring and optimizing connectivity in conservation landscapes through time, accounting for both the biological needs of multiple species and the social and financial constraint of minimizing land area requiring additional protection. Our method is based on the concept of network flow; we demonstrate its use by optimizing protected areas in the Western Cape of South Africa to facilitate autogenic species shifts in geographic range under climate change for a family of endemic plants, the Cape Proteaceae. In 2005, P. Williams and colleagues introduced a novel framework for this protected area design task. To ensure population viability, they assumed each species should have a range size of at least 100 km2 of predicted suitable conditions contained in protected areas at all times between 2000 and 2050. The goal was to design multiple dispersal corridors for each species, connecting suitable conditions between time periods, subject to each species' limited dispersal ability, and minimizing the total area requiring additional protection. We show that both minimum range size and limited dispersal abilities can be naturally modeled using the concept of network flow. This allows us to apply well-established tools from operations research and computer science for solving network flow problems. Using the same data and this novel modeling approach, we reduce the area requiring additional protection by a third compared to previous methods, from 4593 km2 to 3062 km , while still achieving the same conservation planning goals. We prove that this is the best solution mathematically possible: the given planning goals cannot be achieved with a smaller area, given our modeling assumptions and data. Our method allows for flexibility and refinement of the underlying climate-change, species-habitat-suitability, and dispersal models. In particular, we propose an alternate formalization of a minimum range size moving through time and use network flow to achieve the revised goals, again with the smallest possible newly protected area (2850 km2). We show how to relate total dispersal distance to probability of successful dispersal, and compute a trade-off curve between this quantity and the total amount of extra land that must be protected.     

Compositional and functional stability of arthropod communities in the face of ant invasions

There is a general consensus that the diversity of a biotic community can have an influence on its stability, but the strength, ubiquity, and relative importance of this effect is less clear. In the context of biological invasions, diversity has usually been studied in terms of its effect on a community's invasibility, but diversity may also influence stability by affecting the magnitude of compositional or functional changes experienced by a community upon invasion. We examined the impacts of invasive ants on arthropod communities at five natural area sites in the Hawaiian Islands, and assessed whether differences among sites in community diversity and density variables were related to measures of stability. Ant invasion was usually associated with significant changes in overall community composition, as measured by Bray-Curtis distances, particularly among endemic subsets of the communities. Changes in mean species richness were also strong at three of the five sites. Among sites, diversity was negatively related to stability as measured by resistance to overall compositional change, but this effect could not be separated from the strong negative effect of invasive ant density on compositional stability. When compositional stability was measured as proportional change in richness, the best predictor of stability among endemic community subsets was endemic richness, with richer communities losing proportionately more species than species-poor communities. This effect was highly significant even after controlling for differences in invasive ant density and suggested that communities that had already lost many endemic species were resistant to further species loss upon ant invasion, while more intact communities remained vulnerable to species loss. Communities underwent strong but idiosyncratic functional shifts in association with ant invasion, both in terms of trophic structure and total arthropod biomass. There were no apparent relationships, however, between functional stability and community diversity or density measures. Instead, invasive ant density was the best among-site predictor of the magnitude of functional change. Overall, diversity appeared to be a poor predictor of stability in the face of ant invasion in these communities, possibly because any actual diversity effects were overshadowed by community-specific factors and variation in the magnitude of the ant-mediated perturbation.     

Pre-migratory life history stages of juvenile Arctic birds: costs, constraints, and trade-offs

Many young birds on the Arctic tundra are confronted by a challenging task: they must molt their feathers and accumulate fat stores for the autumn migration before climatic conditions deteriorate. Our understanding of the costs and constraints associated with these stages is extremely limited. We investigated post-juvenal molt and premigratory fattening in free-ranging juvenile White-crowned Sparrows (Zonotrichia leucophrys gambelii) on the Arctic tundra. We found evidence for trade-offs between premigratory fat accumulation and molt: heavily molting birds had significantly less fat. Birds increased the rate of fat accumulation as the season progressed, but we found no evidence of a similar increase in rate of molt. Using a controlled captive study to isolate the energetic costs of body feather replacement, we found no difference in fat or size-corrected mass of birds actively growing body feathers as compared to controls. Molting birds, however, consumed 17% more food than controls, suggesting a significant cost of body feather growth. Our results provide evidence of significant costs, constraints, and trade-offs associated with post-juvenal molt and premigratory fat accumulation in young Arctic birds.     

Benthic community response to petroleum-associated components in Arctic versus temperate marine sediments

We assessed the effects of crude oil and drill cuttings on sediment oxygen demand (SOD) of marine benthic communities from Arctic (Barents Sea) and temperate (Oslofjord) areas of the Norwegian continental shelf. Field-collected cores in both areas were subjected to three different treatments: two concentrations of hydrocarbon-contaminated sediments, and drill cuttings (DC). Cores were incubated for 21 days at 5°C (Barents Sea) and at 10°C (Oslofjord) during which SOD was measured five times. We observed significantly higher SOD in the high oil concentration (HOC) and DC treatments compared to control cores from the Arctic, but not in the temperate Oslofjord. No difference was observed between the low oil concentration (LOC) and control at either location. The clear differences in the response of Arctic benthic communities to petroleum compounds compared to temperate benthic communities is likely related to differences in community structure, sensitivity of individual taxa to petroleum-related compounds and different contamination history of the two study areas.     

Geotechnical and leaching properties of flowable fill incorporating waste foundry sand

Waste foundry sand (WFS) can be converted into flowable fill for geotechnical applications. In this study, WFS samples were obtained from 17 independent metal casting facilities with different casting processes, thus representing a good range of WFS properties. The laboratory studies include physical, geotechnical and leaching properties of flowable fills consisting of WFS, cement, and fly ash mixed to different water contents. The main properties measured include WFS physical properties (density, particle gradation, grain shape, and fine content), WFS flowable fill geotechnical properties (unconfined compressive strength, hydraulic conductivity, setting time, and bleeding), and the fill's leaching properties (heavy metals and organics in the bleed water and the leachate extracted from hardened WFS flowable fills). The test results indicate that in terms of the physical properties, most of the data fall within narrow ranges, although data from the copper/aluminum-based WFS samples might fall beyond the ranges. Geotechnical properties of WFS flowable fills in both fresh and hardened phases were verified conforming to the features of specified flowable fills. Material leaching analyses indicate that the toxicity of WFS flowable fills is below regulated criteria. A mix formulation range originated from this study is proposed for the design of WFS made flowable fill.