Atrazine induction of a family 4 cytochrome P450 gene in Chironomus tentans (Diptera: Chironomidae)

Cytochrome P450-dependent microsomal monooxygenase (P450) activity was measured in control and atrazine-exposed third instar midge larvae, Chironomus tentans. Significantly elevated O-demethylase activity was observed in gut homogenates taken from midges exposed to atrazine concentrations from 1 to 10 ppm for 90 h. No significant induction was observed at atrazine concentrations below 1 ppm. A region of a cytochrome P450 family 4 gene was amplified and sequenced from C. tentans larvae. Alignments of inferred amino acid sequences with other insect CYP4 gene homologues indicate a high degree of similarity. Northern blot analysis employing the CYP4 gene fragment as a probe showed an over-expression in C. tentans exposed to atrazine. The results support the previously identified inducibility of cytochrome P450-dependent activity and provide insight into the potential consequences of atrazine exposure to aquatic organisms.     

The influence of humic acids on the phytoextraction of cadmium from soil

Cadmium poses a major environmental and human health threat because of its constant release through anthropogenic activities. A need, therefore, exists for cost-effective remediation procedures. Phytoremediation, the use of plants to extract contaminants from soils and groundwater, has revealed great potential. However, it is limited by the fact that plants need time, nutrient supply and, moreover, have a limited metal uptake capacity. Synthetic chelators have shown positive effects in enhancing heavy metal extraction through phytoremediation, but they have also revealed a vast number of negative side-effects. The objective of this research was to investigate the use of humic acids as an alternative to synthetic chelators. Humic acids were applied to a cadmium-contaminated soil at various dosages, and the uptake of cadmium into Nicotiana tabacum SR-1 was determined in relation to the amounts of total and bioavailable cadmium in the soil. It was found that the theoretical bioavailability of cadmium, as determined by diethylenetriaminepentaacetic acid (DTPA) extraction, did not change, but its plant uptake was enhanced significantly, in some cases up to 65%. Humic acids added at a rate of 2 g kg(-1) soil increased the cadmium concentration in the shoots from 30.9 to 39.9 mg kg(-1). A possible reason for this enhancement is the decrease in pH, resulting in higher cadmium availability. Another possibility taken into account is that plants may take up cadmium complexes with humic acid fragments, which result from microbiological degradation or, self-dissociation.     

Assessment of contaminant lability during phytoremediation of polycyclic aromatic hydrocarbon impacted soil

Polycyclic aromatic hydrocarbons (PAHs) are recalcitrant compounds, some of which are known carcinogens, often found in high residual soil concentrations at industrial sites. Recent research has confirmed that phytoremediation holds promise as a low-cost treatment method for PAH contaminated soil. In this study, the lability of soil bound PAHs in the rhizosphere was estimated using solid phase extraction resin. An extraction time of 14 days was determined to be appropriate for this study. Resin-extractable PAHs, which are assumed to be more bioavailable, decreased during plant treatments. Significant reductions in the labile concentrations of several PAH compounds occurred over 12 months of plant growth. The differences in concentration between the unplanted and the planted soil indicate that the presence of plant roots, in addition to the passage of time, contributes to reduction in the bioavailability of target PAHs.     

Hydrochemical and isotopic effects associated with petroleum fuel biodegradation pathways in a chalk aquifer

Hydrochemical data, compound specific carbon isotope analysis and isotopic enrichment trends in dissolved hydrocarbons and residual electron acceptors have been used to deduce BTEX and MTBE degradation pathways in a fractured chalk aquifer. BTEX compounds are mineralised sequentially within specific redox environments, with changes in electron acceptor utilisation being defined by the exhaustion of specific BTEX components. A zone of oxygen and nitrate exhaustion extends approximately 100 m downstream from the plume source, with residual sulphate, toluene, ethylbenzene and xylene. Within this zone complete removal of the TEX components occurs by bacterial sulphate reduction, with sulphur and oxygen isotopic enrichment of residual sulphate (epsilon(s) = -14.4 per thousand to -16.0 per thousand). Towards the plume margins and at greater distance along the plume flow path nitrate concentrations increase with delta15N values of up to +40 per thousand indicating extensive denitrification. Benzene and MTBE persist into the denitrification zone, with carbon isotope enrichment of benzene indicating biodegradation along the flow path. A Rayleigh kinetic isotope enrichment model for 13C-enrichment of residual benzene gives an apparent epsilon value of -0.66 per thousand. MTBE shows no significant isotopic enrichment (delta13C = -29.3 per thousand to -30.7 per thousand) and is isotopically similar to a refinery sample (delta13C = -30.1 per thousand). No significant isotopic variation in dissolved MTBE implies that either the magnitude of any biodegradation-induced isotopic fractionation is small, or that relatively little degradation has taken place in the presence of BTEX hydrocarbons. It is possible, however, that MTBE degradation occurs under aerobic conditions in the absence of BTEX since no groundwater samples were taken with co-existing MTBE and oxygen. Low benzene delta13C values are correlated with high sulphate delta34S, indicating that little benzene degradation has occurred in the sulphate reduction zone. Benzene degradation may be associated with denitrification since increased benzene delta13C is associated with increased delta15N in residual nitrate. Re-supply of electron acceptors by diffusion from the matrix into fractures and dispersive mixing is an important constraint on degradation rates and natural attenuation capacity in this dual-porosity aquifer.     

Characterization of metal adsorption kinetic properties in batch and fixed-bed reactors

Copper adsorption kinetic properties in batch and fixed-bed reactors were studied in this paper. The isothermal adsorption experiments showed that the copper adsorption capacity of a granular activated carbon (Filtrasorb 200) increased when ionic strength was higher. The presence of EDTA diminished the adsorption. An intraparticle diffusion model and a fixed-bed model were successfully used to describe the batch kinetic and fixed-bed operation behaviors. The kinetics became faster when the solution pH was not controlled, implying that the surface precipitation caused some metal uptake. The external mass transfer coefficient, the diffusivity and the dispersion coefficient were obtained from the modeling. It was found that both external mass transfer and dispersion coefficients increased when the flow rate was higher. Finally effects of kinetic parameters on simulation of fixed-bed operation were conducted.     

Mechanism of effective nocardioform foam control measures for non-selector activated sludge systems.

Solids retention time (SRT), biological scum trapping and recycle, and the dynamic equilibrium between Nocardioform populations in the foam and the mixed liquor are the controlling factors in activated sludge foaming events caused by Nocardioform bacteria. For the operating modes described in this paper, a cured mixed liquor foaming condition (filament counts of approximately 10(5) intersections/g volatile suspended solids) was only achieved when SRT control, selective wasting, and polymer addition were in effect. Solids retention time control, with the SRT remaining below 1.5 days, and selective wasting will cure a severely foaming mixed liquor, but effects will only be observed after 3 or 4 months after implementation. The combined wastage of Nocardioform bacteria from selective wasting and SRT control can ensure long-term foam control to the operation of a pure-oxygen activated sludge system with foam-trapping features. An SRT of 0.3 days will result in the complete washout of Nocardioform bacteria from the activated sludge system, which can then operate at an SRT of 3 days free of Nocardioform. Polymer addition to mixed liquor is only effective for foam control when a large portion of the system biomass exists as a heavy layer of foam above the mixed liquor.     

Remediation of waters contaminated with pentachlorophenol

We describe a simple method of remediating waters contaminated with pentachlorophenol (PCP), which involves filtering the water through clean soil. The filtrate is contaminant free and no PCP can be extracted from the soil. If the soil it treated with dilute acid, the filtrate is still contaminant free but 28.7% of the PCP can be extracted from the contaminated soil. Irradiating the soil with microwave energy either destroys or binds the PCP to the soil irreversibly such that none can be extracted after long periods of time.     

Geoengineering and sustainability

ABSTRACT

Geoengineering is regarded by advocates as a creative and responsible technological option in the face of a climate emergency. Critics often see it as a hubristic attempt to play God, with disastrous consequences for the planet and humanity. These antipodal perspectives are represented by the ideal types of Prometheans and Gaians. Prometheans and Gaians typically talk past each other. The geoengineering debate can be made more fruitful by well articulating their respective positions and subsequently situating them in the discourse of sustainability. A sustainability orientation does not answer the troubling question whether geoengineering should be developed and deployed. But it can foster a ‘fusion of horizons’ between Prometheans and Gaians, providing common ground in an otherwise polarized debate and making a more productive dialogue possible.     

Stratospheric ozone depletion, UV-B radiation and crop disease

Ultraviolet-B radiation (UV-B: 290-315 nm) is expected to increase as the result of stratospheric ozone depletion. Within the environmental range, UV-B effects on host plants appear to be largely a function of photomorphogenic responses, while effects on fungal pathogens may include both photomorphogenesis and damage. The effects of increased UV-B on plant-pathogen interactions has been studied in only a few pathosystems, and have used a wide range of techniques, making generalisations difficult. Increased UV-B after inoculation tends to reduce disease, perhaps due to direct damage to the pathogen, although responses vary markedly between and within pathogen species. Using Septoria tritici infection of wheat as a model system, it is suggested that even in a species that is inherently sensitive to UV-B, the effects of ozone depletion in the field are likely to be small compared with the effects of variation in UV-B due to season and varying cloud. Increased UV-B before inoculation causes a range of effects in different systems, but an increase in subsequent disease is a common response, perhaps due to changes in host surface properties or chemical composition. Although it seems unlikely that most crop diseases will be greatly affected by stratospheric ozone depletion within the limits currently expected, the lack of a detailed understanding of the mechanisms by which UV-B influences plant-pathogen interactions in most pathosystems is a significant limit to such predictions.