Evaluation of hydrophobicity in PAH-contaminated soils during phytoremediation

The impact of recalcitrant organic compounds on soil hydrophobicity was evaluated in contaminated soil from a manufactured gas plant site following 12 months of phytoremediation. Significant reduction in soil wetting and water retention was observed in contaminated soil compared to an uncontaminated control. Phytoremediation was effective at reducing total PAHs by 69% with corresponding changes in soil classification from extremely hydrophobic (initial sample) to moderately-strongly hydrophobic (planted) and hydrophilic-very hydrophilic (unplanted) after 12 months. The greatest reduction in soil hydrophobicity was observed in the unplanted, unfertilized treatments that had the lowest removal rate of PAHs. The presence of plants may contribute to hydrophobicity in contaminated soil.     

Risk assessment of trace elements in the stomach contents of Indo-Pacific Humpback Dolphins and Finless Porpoises in Hong Kong waters

The potential health risks due to inorganic substances, mainly metals, was evaluated for the two resident marine mammals in Hong Kong, the Indo-Pacific Humpback Dolphin (Sousa chinensis) and the Finless Porpoise (Neophocaena phocaenoides). The stomachs from the carcasses of twelve stranded dolphins and fifteen stranded porpoises were collected and the contents examined. Concentrations of thirteen trace elements (Ag, As, Cd, Co, Cr, Cs, Cu, Hg, Mn, Ni, Se, V and Zn) were determined by inductively coupled plasma mass spectrometer (ICP-MS). An assessment of risks of adverse effects was undertaken using two toxicity guideline values, namely the Reference Dose (RfD), commonly used in human health risk assessment, and the Toxicity Reference Value (TRV), based on terrestrial mammal data. The levels of trace metals in stomach contents of dolphins and porpoises were found to be similar. Risk quotients (RQ) calculated for the trace elements showed that risks to the dolphins and porpoises were generally low and within safe limits using the values based on the TRV, which are less conservative than those based on the RfD values. Using the RfD-based values the risks associated with arsenic, cadmium, chromium, copper, nickel and mercury were comparatively higher. The highest RQ was associated with arsenic, however, most of the arsenic in marine organisms should be in the non-toxic organic form, and thus the calculated risk is likely to be overestimated.     

The historical record of PCB and PCDD/F deposition at Greifensee, a lake of the Swiss plateau, between 1848 and 1999

Dated sediment cores provide an excellent way to investigate the historical input of persistent organic pollutants into the environment and to identify possible sources of pollution. The vertical distribution of polychlorinated dibenzo-p-dioxins/polychlorinated dibenzofurans (PCDD/F) and polychlorinated biphenyls (PCB) was investigated in a sediment core from Greifensee to elucidate the historical trends of PCDD/F and PCB inputs between 1848 and 1999. Concentrations of PCB and PCDD/F increased by more than one order of magnitude between 1930 and 1960. PCB and PCDD/F concentrations were 5700 ng/kg dry weight (dw) and 160 ng/kg dw, respectively, in sediments originating from the late 1930s and reached a maximum of 130,000 ng/kg dw and 2400 ng/kg dw, respectively, in the early 1960s. From 1960 on, concentrations decreased to the 1930s level by the mid 1980s. A remarkable shift in the PCDD/F pattern was observed after the early 1940s. Before 1940, the PCDD/F pattern was PCDF dominated (ratio of PCDD to PCDF=0.41+/-0.11), while the PCDD started to be the major species after the early 1940s (ratio of PCDD to PCDF=1.46+/-0.38). The temporal trends of PCB and PCDD/F correlate surprisingly well with each other. This might be due to the coincidence of two factors. The introduction of PCB on the market in the 1930s resulted in emissions due to the widespread use of these industrial chemicals. In the same time period, waste incineration became an increasingly popular way to get rid of garbage, boosting the PCDD/F emissions significantly. The rapid decline of PCDD/F and PCB concentrations in the sediment starting in the early 1960s reflects the result of better emission control techniques in thermal processes and the improvement of waste water treatment in the catchment of Greifensee.     

Biohydrogen production through fermentation using liquid swine manure as substrate

In this paper, continuous production of hydrogen through fermentation with liquid swine manure as substrate was researched using a semi-continuously fed fermenter (8 L in total volume and 4 L in working volume). The pH and temperature for the fermenter were controlled at 5.3 +/- 0.1 and 35 +/- 1 degrees C, respectively, throughout the experiment. Three hydraulic retention times (16, 20, and 24 h) were investigated for their impact on the efficiency and performance of the fermenter in terms of hydrogen yields. The results indicate that hydraulic retention time (HRT) has a strong influence on the fermenter performance. An increasing HRT would increase the variation in hydrogen concentration in the offgas. To produce hydrogen with a fairly consistent concentration, the HRT of the fermenter should not exceed 16 h, which, however, did not appear to be short enough to control methanogenesis because the offgas still contained about 5% methane. When methane content in the offgas exceeded 2%, an inverse linear relationship between hydrogen and methane was observed with a correlation coefficient of 0.9699. To increase hydrogen content in the offgas, methane production has to be limited to below 2%. Also, keeping oxygen content in the fermenter below 1.5% would increase the hydrogen concentration to over 15%. The product to substrate ratio was found to be around 50% for the fermenter system studied, evidenced by the observation that for every 6 liters of manure fermented, 3 liters of pure hydrogen were produced, which was significant and encouraging.     

An outlook on Dutch road safety in 2020; future developments of exposure,crashes and policy

This paper discusses the method used for an outlook on road safety in the Netherlands until 2020. The objectives of the outlook are to judge the feasibility of the Dutch road safety policy targets and to estimate the effects in 2020 of new measures. The outlook consists of baseline forecasts assuming the unchanged continuation of the effect of current road safety policy as a starting point, and the effect of new measures on top of that. We used four different mobility scenarios, derived from a comprehensive study about the macro-economic development of Dutch society until 2040. In the mobility scenario with the largest growth it appeared doubtful whether the policy targets of that time for the maximum number of fatalities in 2020 (580) can be achieved. An extensive inventory of new measures after 2010 produced five already intended new measures, the effects of which were estimated. The results show that the target of maximum 580 fatalities in 2020 can probably be met. The recently adjusted policy target of 500 fatalities in 2020 is also feasible if additional new measures are taken.     

The development of a prototype behavioral marker system for US Navy officers of the deck

The officer of the deck (OOD) of a US Navy ship is in charge of the safe and proper operation of the ship, and accountable to the commanding officer for every event that occurs during his or her OOD watch. This paper discusses the development of a prototype behavioral marker system to evaluate, and provide feedback on, the nontechnical (cognitive, social, and personal resource) skills of OODs.An initial set of 17 categories of nontechnical skills were identified from a literature review. A focus group with four qualified OODs used the skills identified from the literature review to develop an initial taxonomy of five categories, each with two or three corresponding behavioral elements. This taxonomy was then used to classify 149 statements concerned with the nontechnical skills of OODs collected from 16 critical incident interviews. After three iterations of adaptations to the taxonomy, two independent raters were able to reach acceptable levels of reliability in using the taxonomy to classify the statements. Although further development work is required, it is suggested that the prototype behavioral marker system has implications for improving safety and performance on military and civilian ships.     

The Clean Development Mechanism and Sustainable Development in China's Electricity Sector

Abstract

The Clean Development Mechanism, a flexibility mechanism contained in the Kyoto Protocol, offers China an important tool to attract investment in clean energy technology and processes into its electricity sector. The Chinese electricity sector places centrally in the country's economy and environment, being a significant contributor to the acid rain and air pollution problems that plague many of China's cities and regions, and therefore a focus of many related energy and environmental policies. China's electricity sector has also been the subject of a number of economic analyses that have showed that it contains the highest potential for clean energy investment through the Clean Development Mechanism of any economic sector in China. This mechanism, through the active participation from investors in more industrialized countries, can help alleviate the environmental problems attributable to electricity generation in China through advancing such technology as wind electricity generation, clean coal technology, high efficient natural gas electricity generation, or utilization of coal mine methane. In this context, the Clean Development Mechanism also compliments a range of environmental and energy policies which are strategizing to encourage the sustainable development of China's economy.     

Health effects of oxidants

Oxidants of significance to human health include ozone, nitrogen dioxide, and peroxyacetylnitrate. All of these compounds are involved in complex photochemical reactions which makes quantification and prediction of their individual health effects difficult. Ozone causes trauma to lung tissues and interferes with enzyme systems in the lungs and other tissues causing a broad range of symptoms. Measurable health impacts can occur at concentrations as low as 390 μg/m³. Acute effects of ozone exposure are reversible at normal urban concentrations (80–120 μg/m³). A special problem of concern, however, is increased susceptibility to infectious diseases contracted through the lungs. Nitrogen dioxide also causes trauma to lung tissues and interferes with enzyme systems. Measurable impacts can occur at concentrations as low as 100 μg/m³, but recovery is rapid and it is not known whether repeated exposures at this level have cumulative effects or predispose the lungs to permanent damage. Chronic exposure of laboratory animals to higher nitrogen dioxide levels can cause emphysema-like conditions and reduction in resistance to respiratory infection. Epidemiological studies of children in houses with gas stoves confirm the finding of reduced resistance to respiratory infection. The U.S. EPA estimates that health effects may occur in young children exposed to concentrations in excess of 280 to 560 μg/m³ one-hour average. These concentrations occur routinely in houses having gas stoves. Peroxyacetylnitrate is a powerful eye irritant in photochemical smog. Other health effects are similar to those of ozone, but less important because of the relatively low concentrations of this pollutant compared to other oxidants.     

Dietary PBDE intake: a market-basket study in Belgium

A food market-basket, representative for the general Belgian population, containing various meat, fish and dairy food products, was assembled and analysed for its polybrominated diphenyl ether (PBDE) content. Additionally, fast food samples were also investigated. Based on the measured PBDE levels, an average daily dietary intake estimate of PBDEs was calculated. Of all foods analysed, fish had the highest average sum of PBDE levels (BDEs 28, 47, 99, 100, 153, 154, and 183; 460 pg/g ww), followed by dairy products and eggs (260 pg/g ww), fast food (86 pg/g ww) and meat products (70 pg/g ww). One fresh salmon filet had the highest total concentration of PBDEs (2360 pg/g ww), whereas levels in steak and chicken breast were the lowest of all foods analysed. BDE 209 was never found above LOQ in any food. PBDE intake calculations were based on the average daily food consumption in Belgium and were estimated between 23 and 48 ng/day of total PBDEs (lower and upper bound). This value is in accordance with what was previously reported for diets from geographical distinct areas, such as Canada, Finland, Spain, Sweden and the UK. Although it is only a minor constituent of the Belgian diet, fish is the major contributor to the total daily PBDE-intake (around 40%) due to the high PBDE levels in this type of food. Although low contaminated, meat products account for around 30% of the total dietary intake of PBDEs. Dairy products and eggs contribute to a lesser degree (less than 30%).