Protective clothing for pesticide operators: part I – selection of a reference test chemical for penetration testing

A systematic approach was taken to develop a database for protective clothing for pesticide operators; results are reported as a two-part series. Part I describes the research studies that led to identification of a pesticide formulation that could serve as a reference test chemical for further testing. Measurement of pesticide penetration was conducted using different types of pesticide formulations. Six fabrics were tested using 10 formulations at different concentrations. Three formulations were subsequently selected for further testing. Analysis of the data indicated that, when compared with other formulations, mean percent penetration of 5% Prowl 3.3 EC [emulsifiable concentrate diluted to 5% active ingredient (pendimethalin)] is either similar to or higher than most test chemicals. Those results led to choosing 5% Prowl 3.3 EC as a reference test liquid. Part II of the study, published as a separate paper, includes data on a wide range of textile materials.     

Challenges and Opportunities for Creating Intelligent Hazard Alerts: The “FloodHippo” Prototype

Disasters evolving from hazards are a persistent and deadly occurrence in the United States. Despite this, hazard alerts have remained spatially vague, temporally imprecise, and lack actionable information. These deficiencies indicate a divide between the status quo and what is possible given modern environmental models, geographic information systems (GIS), and smartphone capabilities. This work describes an alternative, prototype system, “FloodHippo,” which integrates operational model outputs, cloud‐based GIS, and expanded communication channels to provide personal and interactive disaster alerts for floods. The precepts and methods underpinning FloodHippo apply equally to other disasters that evolve over space and time, presenting the opportunity for a more intelligent disaster response system. The development of such a system would not only minimize current shortcomings in disaster alerts but also improve resilience through individual action, along with community, academic, and federal cooperation.     

Managing the nitrogen cycle to reduce greenhouse gas emissions from crop production and biofuel expansion

Public policies are promoting biofuels as an alternative to fossil fuel consumption in order to mitigate greenhouse gas (GHG) emissions. However, the mitigation benefit can be at least partially compromised by emissions occurring during feedstock production. One of the key sources of GHG emissions from biofuel feedstock production, as well as conventional crops, is soil nitrous oxide (N₂O), which is largely driven by nitrogen (N) management. Our objective was to determine how much GHG emissions could be reduced by encouraging alternative N management practices through application of nitrification inhibitors and a cap on N fertilization. We used the US Renewable Fuel Standards (RFS2) as the basis for a case study to evaluate technical and economic drivers influencing the N management mitigation strategies. We estimated soil N₂O emissions using the DayCent ecosystem model and applied the US Forest and Agricultural Sector Optimization Model with Greenhouse Gases (FASOMGHG) to project GHG emissions for the agricultural sector, as influenced by biofuel scenarios and N management options. Relative to the current RSF2 policy with no N management interventions, results show decreases in N₂O emissions ranging from 3 to 4 % for the agricultural sector (5.5–6.5 million metric tonnes CO₂?eq.?year^?1; 1 million metric tonnes is equivalent to a Teragram) in response to a cap that reduces N fertilizer application and even larger reductions with application of nitrification inhibitors, ranging from 9 to 10 % (15.5–16.6 million tonnes CO₂?eq.?year^?1). The results demonstrate that climate and energy policies promoting biofuel production could consider options to manage the N cycle with alternative fertilization practices for the agricultural sector and likely enhance the mitigation of GHG emissions associated with biofuels.     

Spatial and temporal land use and carbon stock changes in Uganda: implications for a future REDD strategy

Using a map overlay procedure in a Geographical Information System environment, we quantify and map major land use and land cover (LULC) change patterns in Uganda period 1990–2005 and determine whether the transitions were random or systematic. The analysis reveals that the most dominant systematic land use change processes were deforestation (woodland to subsistence farmland—3.32%); forest degradation (woodland to bushland (4.01%) and grassland (4.08%) and bush/grassland conversion to cropland (5.5%) all resulting in a net reduction in forests (6.1%). Applying an inductive approach based on logistic regression and trend analyses of observed changes we analyzed key drivers of LULC change. Significant predictors of forest land use change included protection status, market access, poverty, slope, soil quality and presence/absence of a stream network. Market access, poverty and population all decreased the log odds of retaining forests. In addition, poverty also increased the likelihood of degradation. An increase in slope decreased the likelihood of deforestation. Using the stock change and gain/loss approaches we estimated the change in forest carbon stocks and emissions from deforestation and forest degradation. Results indicate a negligible increase in forest carbon stocks (3,260 t C yr-1) in the period 1990–2005 when compared to the emissions due to deforestation and forest degradation (2.67 million t C yr-1). In light of the dominant forest land use change patterns, the drivers and change in carbon stocks, we discuss options which could be pursued to implement a future national REDD plus strategy which considers livelihood, biodiversity and climate change mitigation objectives.     

Metal microchannel lamination using surface mount adhesives for low-temperature heat exchangers

This paper reports the feasibility of using surface mount adhesives to produce low temperature microchannel arrays in a wide variety of metals. Sheet metal embossing and chemical etching processes have been used to produce sealing bosses that eliminate channel laminae, resulting in approximately 50% material savings over traditional methods. An assembly process using adhesive dispense and cure is outlined to produce leak-free devices. Optimal fill ratios were determined to be between 1.1 and 1.25. Bond strength investigation reveals robustness to surface conditions and a bond strength of 5.5–8.5 MPa using a 3X safety factor. Dimensional characterization reveals a two sigma (95%) post-bonded channel height tolerance under 10% after bonding. Patterning tolerance and surface roughness of the laminae faying surfaces were found to have a significant influence on the final post-bonded channel height. Leakage and burst pressure testing on several samples has established confidence that adhesive bonding can produce leak-free joints. Operating pressures up to 413 kPa have been satisfied, equating to tensile pressure on bond joints of 1.9 MPa. Higher operating pressures can be accommodated by increasing the bond area of devices.     

Long Term Trends in Liver Neoplasm Epizootics of Brown Bullhead in the Black River, Ohio

Since 1980, liver neoplasms in brown bullhead and polynuclear aromatic hydrocarbons (PAH) in sediment have been researched in a series of studies on the Black River in Lorain, Ohio. In the early 1980s the liver cancer prevalence in fish of age 3 and older was high, ranging from 22% to 39% of the adult population. These high cancer rates corresponded to high levels of PAHs in the sediment resulting from long-term releases by an upstream coking facility (USX). In 1983 this coking plant was closed, and by 1987 the PAH in sediment had declined by about two orders of magnitude. Coincidentally the tumor prevalence in 1987 was only about one-fourth of that in the early 1980s. In 1990, the most contaminated sediments were dredged. Neoplasm surveys in 1992 and 1993 found liver tumor frequencies in mature bullhead were as high as or higher than in the early 1980s. However liver tumor incidence declined in 1994, especially among age 3 fish, where neoplasm incidence was zero. These age 3 fish were the first group sampled that were not present during the 1990 dredging. These data are consistent with a hypothesis that the increase in tumor prevalence in 1992 and 1993 was caused by exposure to buried PAH-contaminated sediments released by the dredging. This research points out the insight provided by long term effects studies.     

Production of boundary layer ozone from tropical American Savannah biomass burning emissions

Boundary layer ozone and carbon monoxide were measured at a savannah site in the Orinoco river basin, during the dry and wet seasons. CO and O₃ concentrations recorded around noontime show a good linear correlation, suggesting that the higher ozone levels observed during the dry season are photochemically produced during the oxidation of reactive hydrocarbons in the presence of NO_x both emitted by biomass burning. The rate of photochemical ozone production in the boundary layer ozone by biomass burning calculated from the production ratio ΔO₃/ΔCO (0.17±0.01 v : v) and the amount of CO produced by fires (0.26–1.3 mole m⁻² dry season⁻¹), ranges from 0.6 to 2.6 ppbv h⁻¹ for 8 h of daylight. This O₃ production rate is in fairly good agreement with the value derived from RO₂ radical measurements made in the Venezuelan savannah during the dry season. The net boundary layer production of O₃ from all tropical America savannah fires is estimated to range between 0.28 and 0.36 Tmol O₃ per year, which is about 3 times higher than the O₃ produced from pollution sources in the eastern United States during the summer. An extrapolation to all of the world's savannah would indicate a net boundary layer ozone production of about 1.2 Tmol yr⁻¹. This is discussed in the context of the overall global budget of tropospheric ozone.     

Establishing a Regional Monitoring Strategy: The Pacific Northwest Forest Plan

adaptive monitoring design. Adaptive monitoring design is an iterative process that refines the specifications for monitoring over time as a result of experience in implementing a monitoring program, assessing results, and interacting with users. An adaptive design therefore facilitates ecosystem management. We also discuss lessons of temporal and spatial scales raised by the consideration of a design for ecosystem management. Three additional issues—integration of information from different sources, institutional infrastructure, and the roles of individuals working in an interagency setting—are also identified, but not developed in detail.     

Tales of local sustainability

Local Agenda 21 (LA21) has emerged as the principal means of addressing sustainable development practice at the local government level. In the UK, progressive local authorities have emphasised the need for participatory processes and innovative policy options. This requires commitment and active involvement from a variety of individuals and organisations. Participants in LA21 have been interviewed to determine their motivations and perceptions, and their responses are represented in terms of the storylines of various constituencies of interest. The key themes seem to be those of actively promoting widespread participation, gaining competence in innovative techniques, taking a holistic approach to quality of life concerns, and claiming the legitimacy of local government as a key player in sustainable development.