Catchment-Wide Wetland Assessment and Prioritization Using the Multi-Criteria Decision-Making Method TOPSIS

It is widely accepted that wetland ecosystems are under threat worldwide. Many communities are now trying to establish wetland rehabilitation programs, but are confounded by a lack of objective information on wetland condition or significance. In this study, a multi-criteria decision-making method, TOPSIS (the Technique for Order Preference by Similarity to Ideal Solution), was adapted to assist in the role of assessing wetland condition and rehabilitation priority in the Clarence River Catchment (New South Wales, Australia). Using 13 GIS data layers that described wetland character, wetland protection, and wetland threats, the wetlands were ranked in terms of condition. Through manipulation of the original model, the wetlands were prioritized for rehabilitation. The method offered a screening tool for the managers in choosing potential candidate wetlands for rehabilitation in a region.     

A novel sigma coordinate system to simulate abrupt changes of underwater terrain in a hydrodynamic model: application to Lake Mead,USA

The sigma (SIG) coordinate system in ocean circulation simulation models results inevitably in horizontal pressure gradient error. This problem also emerges in models of deep lakes or reservoirs with the same characteristics of underwater terrain mutation. SIG coordinates reflect vertical relative stratification but cannot be used to calculate horizontal pressure gradient force in places with drastic topographic changes; this results in vertical water temperature and circulation errors. In deep lakes or reservoirs, differences in water density caused by the temperature difference between upper and lower water bodies is the primary cause of thermal stratification phenomena. Lake Mead was used as a case study on steep topography based on Environmental Fluid Dynamics Code (EFDC) model in this study. SIG coordinates result in close agreement between the calibrated temperature time series at the top and middle water layers, but disparity in the bottom water layer. The error emerges in the horizontal pressure gradient error due to the SIG coordinate transformation. Neither increasing the vertical resolution nor adjusting the horizontal viscosity coefficient resolve this error. We test the sigma-zed (SGZ) coordinate which combines Z coordinate and SIG coordinate as a replacement for the SIG coordinate to find that they effectively reduce the model’s runtime and simulation efficiency. The vertical temperature distribution in SGZ coordinate mode is more accurate than the distribution in SIG coordinate mode. The Navier-Stokes horizontal gradient and advection diffusion equation results under SIG coordinates are very sensitive to the pressure gradient. The replacement also enhances resolution near the thermocline, facilitates reclosing of the water bottom and the equal sigma surface, lends significant advantages in terms of vertical temperature in the simulation for local deep water with steep terrain, and shortens runtime for 0.14 h. SGZ mixed coordinates are recommended in the simulation of deep lakes or reservoirs wherein the underwater topography is large (with abundant continuous deep trenches or reefs).

     

Geographic Variability in Radon Exhalation at a Rehabilitated Uranium Mine in the Northern Territory, Australia

In this study, dry season radon flux densities and radon fluxes have been determined at the rehabilitated Nabarlek uranium mine in northern Australia using conventional charcoal canisters. Environmental background levels amounted to 31± 15 milli Becquerel per m² per second (mBq m⁻² s⁻¹). Radon flux densities within the fenced rehabilitated mine area showed large variations with a maximum of 6500 mBq m⁻² s⁻¹ at an area south of the former pit characterised by a disequilibrium between ²²⁶Ra and ²³⁸U. Radon flux densities were also high above the areas of the former pit (mean 971 mBq m⁻² s⁻¹) and waste rock dump (mean 335 mBq m⁻² s⁻¹). The lower limit for the total pre-mining radon flux from the fenced area (140 ha) was estimated to 214 kBq s⁻¹, post-mining radon flux amounted to 174 kBq s⁻¹.Our study highlights that the results of radon flux studies are vitally dependant on the selection of individual survey points. We suggest the use of a randomised system for both the selection of survey points and the placement of charcoal canisters at each survey point, to avoid over estimation of radon flux densities. It is also important to emphasize the significance of having reliable pre-mining radiological data available to assess the success of rehabilitation of a uranium mine site.2006 Springer. The Australian Government's right to retain a non-exclusive, royalty free licence in and to any copyright is acknowledged.     

Feasibility of coupling a thermal/optical carbon analyzer to a quadrupole mass spectrometer for enhanced PM2.5 speciation

A thermal/optical carbon analyzer (TOA), normally used for quantification of organic carbon (OC) and elemental carbon (EC) in PM_2.5 (fine particulate matter) speciation networks, was adapted to direct thermally evolved gases to an electron impact quadrupole mass spectrometer (QMS), creating a TOA-QMS. This approach produces spectra similar to those obtained by the Aerodyne aerosol mass spectrometer (AMS), but the ratios of the mass to charge (m/z) signals differ and must be remeasured using laboratory-generated standards. Linear relationships are found between TOA-QMS signals and ammonium (NH₄⁺), nitrate (NO₃^?), and sulfate (SO₄^2-) standards. For ambient samples, however, positive deviations are found for SO₄^2-, compensated by negative deviations for NO₃^?, at higher concentrations. This indicates the utility of mixed-compound standards for calibration or separate calibration curves for low and high ion concentrations. The sum of the QMS signals across all m/z after removal of the NH₄⁺, NO₃^?, and SO₄^2- signals was highly correlated with the carbon content of oxalic acid (C?H?O?) standards. For ambient samples, the OC derived from the TOA-QMS method was the same as the OC derived from the standard IMPROVE_A TOA method. This method has the potential to reduce complexity and costs for speciation networks, especially for highly polluted urban areas such as those in Asia and Africa.

Implications: Ammonium, nitrate, and sulfate can be quantified by the same thermal evolution analysis applied to organic and elemental carbon. This holds the potential to replace multiple parallel filter samples and separate laboratory analyses with a single filter and a single analysis to account for a large portion of the PM_2.5 mass concentration.     

Silver near municipal wastewater discharges into western Lake Ontario,Canada

Because of the widespread use of silver nanoparticles in commercial products, discharges of municipal wastewater may be a point source of silver in the aquatic environment. We monitored two sites in western Lake Ontario impacted by discharges from wastewater treatment plants serving the City of Toronto. Concentrations of silver were elevated in bottom sediments and suspended sediments collected at the two sites. We also deployed two types of passive samplers in the water column at the two sites, the newly developed Carbon Nanotube Integrative Samplers for monitoring “CNIS-labile” silver and Diffusive Gradient in Thin Film samplers for monitoring “DGT-labile” silver. Results from these passive samplers indicated that the concentrations of silver at the two sites were either below detection limits or were in the ng/L range. In laboratory experiments where the sediments were re-suspended in Milli-Q water, a small proportion of the silver (i.e., <?25%) was labile and partitioned as colloidal or dissolved silver into the liquid phase after agitation. Nanoparticles tentatively identified as silver nanoparticles were detected by single-particle ICP-MS in suspension after agitation of both suspended and bottom sediments. Therefore, there is a need to assess whether silver species, including silver nanoparticles are transported from wastewater treatment plants into sediments in the aquatic environment. This study is unique in focusing on the in situ distribution of silver in natural waters and in sediments that are potentially impacted by urban sources of nanoparticles.     

Assessment using CFD of the wind direction on the air discharges caused by natural ventilation of a poultry house

Air inside poultry houses must be removed on a regular basis to prevent excess of heat, particles and noxious gases that can imperil animals. To cope with this issue, natural ventilation could be an effective method when assisted by accurate predictions. This study investigates air discharges caused by natural ventilation of a poultry house by means of a three-dimensional computational fluid dynamics (CFD) model. It solves the governing equations of momentum, heat and mass transport, radiative transfers and animal-generated heat. Wind directions of 0°, 36° and 56° (0° corresponds to a wind blowing perpendicular to the ridgeline) were investigated; the CFD model predictions achieved a RMSE of 1.2 °C and 0.6 g[H₂O] kg^?1 [dry air] for internal temperature and absolute humidity, respectively, when air blew with an angle of 36°. Air renewal rates (ARR) were 39.5 (±?1.9), 34.9 (±?2.2) and 33.6 (±?1.7) volumes of the building per hour, when air blew at 0°, 36° and 56°, respectively. Such ARR predictions served to know how the gases contained in air would likely spread downstream from the building in order to define regions of potentially high gas concentration that could endanger neighbouring habitable facilities.     

Comprehensive analysis of the carbon impacts of vehicle intelligent speed control

In recent years sophisticated technologies have been developed to control vehicle speed based on the type of road the vehicle is driven on using Global Positioning Systems and in-car technology that can alter the speed of the vehicle. While reducing the speed of road vehicles is primarily of interest from a safety perspective, vehicle speed is also an important determinant of vehicle emissions and thus these technologies can be expected to have impacts on a range of exhaust emissions. This work analyses the results from a very large, comprehensive field trial that used 20 instrumented vehicles with and without speed control driven almost 500,000 km measuring vehicle speed at 10 Hz. We develop individual vehicle modal emissions models for CO₂ for 30 Euro III and Euro IV cars at a 1-Hz time resolution. Generalized Additive Models were used to describe how emissions from individual vehicles vary depending on their driving conditions, taking account of variable interactions and time-lag effects. We quantify the impact that vehicle speed control has on-vehicle emissions of CO₂ by road type, fuel type and driver behaviour. Savings in CO₂ of ≈6% were found on average for motorway-type roads when mandatory speed control was used compared with base case conditions. For most other types of road, speed control has very little effect on emissions of CO₂ and in some cases can result in increased emissions for low-speed limit urban roads. We also find that there is on average a 20% difference in CO₂ emission between the lowest and highest emitting driver, which highlights the importance of driver behaviour in general as a means of reducing emissions of CO₂.     

Cross-reactivity of anti-Salmonella egg-yolk antibodies to Salmonella serovars

The cross-reactivity of egg yolk antibodies specific to antigens of Salmonella Enteritidis and Salmonella Typhimurium to killed bacterial cells of common Salmonella serovars were tested using an indirect Enzyme Linked Immunosorbent Assay (ELISA). Egg yolk antibodies were produced against purified fimbriae, flagella and lipopolysaccharide (LPS) of S. Enteritidis strain ATCC13076 and flagella, LPS and outer membrane proteins (OMP) of S. Typhimurium strain ATCC13311. For immunological specificity of egg yolk antibodies against killed bacterial cells, we found that the titers of the anti-S. Enteritidis egg yolk antibodies were higher than those of the anti-S. Typhimurium antibodies. In the evaluation of cross-reactivity of these egg yolk antibodies to various Salmonella serovars, we observed that the anti-S. Enteritidis antibodies exhibited more specific affinity than those of the anti-S. Typhimurium antibodies. All S. Enteritidis strains reacted specifically with the anti-S. Enteritidis fimbrial and flagellar egg yolk antibody whereas anti-S. Enteritidis LPS and anti-S. Typhimurium LPS, OMP and flagellar antibodies displayed non-specific reactivity to all Salmonella serovars used in this study. This finding suggests that it may be possible to design a anti-fimbrial egg yolk antibody of S. Enteritidis as a diagnostic tool and a cocktail of OMP and LPS antigens of S. Enteritidis and S. Typhimurium could be used for administering broad spectrum passive immunity to protect against the colonization of pathogenic Salmonella strains in food animals.     

Towards a developmental theory of place attachment

Place theory offers no explanation of the developmental processes by which place attachment arises. Drawing on recent findings in human attachment theory, this study offers a developmental model of the process by which place attachment emerges from a childhood place experience. A pattern of positively affected experiences of place in childhood are generalised into an unconscious internal working model of place which manifests subjectively as a long-term positively affected bond to place known as place attachment. Qualitative analysis of adult remembrance of childhood place experience provides support for this model and finds important parallels in the developmental processes underpinning place attachment and human attachment as well as some differences.     

Quantitative evaluation of the chilled-ammonia process for CO2 capture using thermodynamic analysis and process simulation

There is strong world-wide interest in developing new and improved processes for post-combustion capture of CO₂, often using chemical absorption. Developers of new processes make positive claims for their proposals in terms of low energy consumption, but these are usually difficult to validate. This paper demonstrates that rigorous application of thermodynamic analysis and process simulation provides a powerful way to quantitatively estimate the energy requirements of CO₂-capture processes by applying the methodology to the analysis and evaluation of the chilled-ammonia process.