A geochemical study of overbank sediments in an urban area (Madrid,Spain)

Overbank and stream sediments have been studied in the Community of Madrid. Four vertical profiles have been sampled corresponding to Guadarrama, Jarama, and finally Manzanares River, where two profiles have been studied upstream (El Pardo profile) and downstream (Rivas profile) Madrid city. Sieved samples (<63 µm) were subjected to total (ICP-MS/ICP-OES and INAA) and partial analysis (ICP-MS). AMS radiocarbon dating techniques revealed a young age (170 ± 40 years BP) at 2.40–2.65 m depth for Rivas profile. It has not been possible to detect pristine or pre-industrial overbank sediments, since in the rest of the studied profiles, anthropogenic wastes were found even in the lower levels. Three main sources of sediment have been detected in the area. Granitic and arkosic geology, located in the northern part of Madrid (U, Th, W, K, Na, or rare earth elements); clays located in the southeast of Madrid (Ni, Cr, or V), and finally an anthropogenic source has been identified (Au, Ag, Pb, Zn, or Sb) in Rivas profile. The influence of the anthropogenic activity has been established based on the contents distribution of contaminant elements in the profile. This can be associated to the growth of industrial activities and population in the city of Madrid during the last decades. The comparison of the profiles by a k-means cluster analysis showed some similarities for these samples that could have analogous sources (anthropogenic and geological).     

Safety compliance climate concerning risk assessment and preventive measures in EU legislation: A Finnish survey

The aim of the present study is to explore the process dynamics of the safety compliance climate and work relationships, including their antecedents and consequences. After investigating the many dimensions of safety compliance climate and of work relationships, the study concludes that a multi-component measure is needed to fully assess all of their dimensions. With respect to the impacting positively on safety compliance legislation, the present study found the following factors: “contribution measures”, “concrete preventive measures” and “risk assessment process”. For risk assessment factors on safety compliance the study identified “planning, guidelines, policy, management”, “prioritization of proactive measures”, “results in cooperation and information” and “active use of risks assessment document”. In a regression model for the workers, both risk assessment process and contribution measures had a statistically highly significant (p < 0.001) effect on concrete preventive measures. In the regression analysis of the employers risk assessment process had a statistically significant (p < 0.01) effect and contribution measures had a statistically highly significant (p < 0.001) effect on concrete preventive measures.     

Identification of Sudan III-(deoxy)-guanosine adducts formed in situ in a reaction with no catalyst

Incubation of guanosine and Sudan III induces the formation of a stable adduct, which may be identified using a spectrophotometric technique and mass spectroscopy. The high nucleophilicity of the C⁸ position and its proximity to N⁷ makes the site susceptible to a nucleophilic attack, which explains the S_N2 reaction detected between guanosine and Sudan III dye. In addition, direct interaction of Sudan III with calf thymus DNA was monitored using a simple spectrophotometric technique. The results presented indicate that a simple modification of the chemical structure of Sudan I (monoazo dye) to Sudan III (diazo dye) markedly alters reactivity towards nitrogenous DNA bases.     

Comparison of extraction methods for polycyclic aromatic hydrocarbon determination in sediments

Different sample preparation methods for the determination of polycyclic aromatic hydrocarbons (PAHs) in lake and river sediments were compared and evaluated. Freeze‐dried sediment materials were extracted using Soxhlet extraction, ultrasonic agitation and digestion with various solvents and solvent mixtures. Similarly, clean‐up methods using various types of sorbents for separation of PAHs tested.

The following method gives the best results for the determination of PAHs: freeze‐dried sediment samples were extracted using Soxhlet extractor with dichloromethane (6 hr, dark), extracts were cleanup using Silica gel and a mixture of n‐hexa‐ne‐dichloromethane was used for the elution of PAHs.

This method was used for the determination of 7 selected PAHs in sediment samples from Finnish lakes and Czech streams.     

Reduction of CO2 emission by optimally tracking a pre-defined target

The recent global financial crisis has highlighted the need for balanced and efficient investments in the reduction of the greenhouse effect caused by emissions of CO₂ on a global scale. In a previous paper, the authors proposed a mathematical model describing the dynamic relation of CO₂ emission with investment in reforestation and clean technology. An efficient allocation of resources to reduce the greenhouse effect has also been proposed. Here, this model is used to provide estimates of the investments needed in land reforestation and in the adoption of clean technologies for an optimum emission and abatement of CO₂, for the period of 1996–2014. The required investments are computed to minimize deviations with respect to the emission targets proposed in the Kyoto Protocol for European Countries. The emission target can be achieved by 2014 with investments in reforestation peaking in 2004, and a reduction of the expected GDP of 42%, relative to 2006. Investments in clean technology should increase between 2008 and 2010 with maximum transfer figures around 70 million American dollars. Total (cumulative) costs are, however, relatively high depending on the price of carbon abatement and the rate at which the expected CO₂ concentration in the atmosphere should be reduced. Results highlight the advantages for policy makers to be able to manage investments in climate policy more efficiently, controlling optimum transfers based on a portfolio of actions that tracks a pre-defined CO₂ concentration target.     

Impact of consistent boundary layer mixing approaches between NAM and CMAQ

Discrepancies in grid structure, dynamics and physics packages in the offline coupled NWS/NCEP NAM meteorological model with the U.S. Environmental Protection Agency Community Multiscale Air Quality (CMAQ) model can give rise to inconsistencies. This study investigates the use of three vertical mixing schemes to drive chemistry tracers in the National Air Quality Forecast Capability (NAQFC). The three schemes evaluated in this study represent various degrees of coupling to improve the commonality in turbulence parameterization between the meteorological and chemistry models. The methods tested include: (1) using NAM predicted TKE-based planetary boundary height, h, as the prime parameter to derive CMAQ vertical diffusivity; (2) using the NAM mixed layer depth to determine h and then proceeding as in (1); and (3) using NAM predicted vertical diffusivity directly to parameterize turbulence mixing within CMAQ. A two week period with elevated surface O₃ concentrations during the summer 2006 has been selected to test these schemes in a sensitivity study. The study results are verified and evaluated using the EPA AIRNow monitoring network and other ozonesonde data. The third method is preferred a priori as it represents the tightest coupling option studied in this work for turbulent mixing processes between the meteorological and air quality models. It was found to accurately reproduce the upper bounds of turbulent mixing and provide the best agreement between predicted h and ozonesonde observed relative humidity profile inferred h for sites investigated in this study. However, this did not translate into the best agreement in surface O₃ concentrations. Overall verification results during the test period of two weeks in August 2006, did not show superiority of this method over the other 2 methods in all regions of the continental U.S. Further efforts in model improvement for the parameterizations of turbulent mixing and other surface O₃ forecast related processes are warranted.     

The impact of chemical lateral boundary conditions on CMAQ predictions of tropospheric ozone over the continental United States

A sensitivity study is performed to examine the impact of lateral boundary conditions (LBCs) on the NOAA-EPA operational Air Quality Forecast Guidance over continental USA. We examined six LBCS: the fixed profile LBC, three global LBCs, and two ozonesonde LBCs for summer 2006. The simulated results from these six runs are compared to IONS ozonesonde and surface ozone measurements from August 1 to 5, 2006. The choice of LBCs can affect the ozone prediction throughout the domain, and mainly influence the predictions in upper altitude or near inflow boundaries, such as the US west coast and the northern border. Statistical results shows that the use of global model predictions for LBCs could improve the correlation coefficients of surface ozone prediction over the US west coast, but could also increase the ozone mean bias in most regions of the domain depending on global models. In this study, the use of the MOZART (Model for Ozone And Related chemical Tracers) prediction for CMAQ (Community Multiscale Air Quality) LBC shows a better surface ozone prediction than that with fixed LBC, especially over the US west coast. The LBCs derived from ozonesonde measurements yielded better O₃ correlations in the upper troposphere.     

Potentially harmful elements in house dust from Estarreja,Portugal: characterization and genotoxicity of the bioaccessible fraction

Due to their behavioral characteristics, young children are vulnerable to the ingestion of indoor dust, often contaminated with chemicals that are potentially harmful. Exposure to potentially harmful elements (PHEs) is currently exacerbated by their widespread use in several industrial, agricultural, domestic and technological applications. PHEs cause adverse health effects on immune and nervous systems and can lead to cancer development via genotoxic mechanisms. The present study is an integrated approach that aims at assessing the genotoxicity of bioaccessible PHEs following ingestion of contaminated house dust. A multidisciplinary methodology associating chemical characterization of five house dust samples, extraction of the bioaccessible PHEs in gastric extracts by the unified BARGE method, determination of the bioaccessible fraction and in vitro genotoxicity of gastric extracts in adenocarcinoma gastric human (AGS) cells was developed. The five gastric extracts induced dose-dependent genotoxicity in AGS cells. Copper (bioaccessible concentration up to 111 mg/kg) was probably the prevalent PHE inducing primary DNA damage (up to 5.1-fold increase in tail DNA at 0.53 g/l of gastric extract). Lead (bioaccessible concentration up to 245 mg/kg) was the most prevalent PHE inducing chromosome-damaging effects (r = 0.55; p < 0.001 for micronucleated cells induction). The association of principal component analysis and Spearman’s correlations was decisive to understand the chromosome-damaging properties of the bioaccessible PHEs in AGS cells. This methodology could be used on a larger-scale study to provide useful information for science-based decision-making in regulatory policies, and a better estimation of human exposure and associated health risks.     

Lack of population structure in the fiddler crab Uca annulipes along an East African latitudinal gradient: genetic and morphometric evidence

Phylogeographic patterns in Uca annulipes sampled from 30 locations across an East African latitudinal gradient were investigated using mitochondrial DNA cytochrome oxidase I sequences and analysed together with patterns of morphometric differentiation. Four hundred and four specimens along the east African coast were sampled, and 18 haplotypes were encountered. Haplotype and nucleotide diversity values were very low and the phylogenetic analysis did not reveal any clear phylogeographic structure. Furthermore, the analysis of molecular variance and pairwise Φ _ST values showed no significant spatial population differentiation. Mismatch analyses and tests of neutrality supported the hypothesis that this species has undergone a fairly recent demographic expansion. Our results, therefore, failed to demonstrate significant geographical structure in the pattern of genetic variation, indicating that populations of U. annulipes are capable of extensive gene flow among mangroves along the coast. The genetic structure of this species could be panmictic due to a high amount of gene flow along the geographical gradient in study during the planktonic larval phase, when larvae are carried along stream by the dominant currents. Moreover, the morphometric analysis performed did not reveal differences of shape differentiation according to a geographical pattern, although significant differences among the sampling areas were found.