Investigating the complex relationship between in situ Southern Ocean pCO_{2} and its ocean physics and biogeochemical drivers using a nonparametric regression approach

The objective in this paper is to investigate the use of a non-parametric approach to model the relationship between oceanic carbon dioxide \((pCO_2)\) and a range of ocean physics and biogeochemical in situ variables in the Southern Ocean, which influence its in situ variability. The need for this stems from the need to obtain reliable estimates of carbon dioxide concentrations in the Southern Ocean which plays an important role in the global carbon flux cycle. The main challenge involved in this objective is the spatial limitation and seasonal bias of the in situ data. Moreover, studies have also reported that the relationship between \(pCO_2\) and its drivers is complex. As such, in this paper, we use the non-parametric kernel regression approach since it is able to accurately capture the complex relationships between the response and predictor variables. In this analysis we use the in situ data obtained from the SANAE49 return leg journey between Antarctic to Cape Town. To the best of our knowledge, this is the first time this data set has been subjected to such analysis. The model variants were developed on a training data subset, and the ‘goodness’ of the models were assessed on an “unseen” test data subset. Results indicate that the nonparametric approach consistently captures the relationship more accurately in terms of mean square error, root mean square error and mean absolute error, over a standard parametric approach (multiple linear regression). These results provide a platform for using the developed nonparametric regression model based on in situ measurements to predict \(pCO_2\) for a larger spatial region in the Southern Ocean based on satellite biogeochemical measurements of predictor variables, given that satellites do not measure \(pCO_2\) .     

Potential toxic elements in stream sediments,soils and waters in an abandoned radium mine (central Portugal)

Environmental Geochemistry and Health - The Alto da Várzea radium mine (AV) exploited ore and U-bearing minerals, such as autunite and torbernite. The mine was exploited underground from 1911...     

Functional regression on remote sensing data in oceanography

The aim of this study is to propose the use of a functional data analysis approach as an alternative to the classical statistical methods most commonly used in oceanography and water quality management. In particular we consider the prediction of total suspended solids (TSS) based on remote sensing (RS) data. For this purpose several functional linear regression models and classical non-functional regression models are applied to 10 years of RS data obtained from medium resolution imaging spectrometer sensor to predict the TSS concentration in the coastal zone of the Guadalquivir estuary. The results of functional and classical approaches are compared in terms of their mean square prediction error values and the superiority of the functional models is established. A simulation study has been designed in order to support these findings and to determine the best prediction model for the TSS parameter in more general contexts.     

Discussion of “Tang,H., Zhang,H., & Yuan,S. (2018). Hydrodynamics and contaminant transport on a degraded bed at a 90-degree channel confluence. Environmental Fluid Mechanics, 18(2), 443–463”

The authors measured and computed the hydrodynamics and passive scalar dispersion in 90-degree open channel confluences over flat and degraded beds with a dominant upstream or tributary inflow. The present discussion essentially deals with the direction of rotation of the secondary currents, reported for the flat bed configuration with dominant tributary inflow. This rotation direction is indeed surprisingly opposite to the ones reported in the literature, both from calculations and measurements, even if present geometry slightly differs from literature geometries.     

Wildlife collection for scientific purposes

Illegal transfer of wildlife has 2 main purposes: trade and scientific research. Trade is the most common, whereas scientific research is much less common and unprofitable, yet still important. Biopiracy in science is often neglected despite that many researchers encounter it during their careers. The use of illegally acquired specimens is detected in different research fields, from scientists bioprospecting for new pharmacological substances, to taxonomists working on natural history collections, to researchers working in zoos, aquariums, and botanical gardens. The practice can be due to a lack of knowledge about the permit requirements in different countries or, probably most often, to the generally high level of bureaucracy associated with rule compliance. Significant regulatory filters to avoid biopiracy can be provided by different stakeholders. Natural history collection hosts should adopt strict codes of conduct; editors of scientific publications should require authors to declare that all studied specimens were acquired legally and to cite museum catalog numbers as guarantee of best practices. Scientific societies should actively encourage publication in peer-reviewed journals of work in which specimens collected from the wild were used. The International Commission on Zoological Nomenclature could require newly designated types based on recently collected specimens to be accompanied by statements of deposition in recognized scientific or educational institutions. We also propose the creation of an online platform that gathers information about environmental regulations and permits required for scientific activities in different countries and respective responsible governmental agencies and the simplification of the bureaucracy related to regulating scientific activities. This would make regulations more agile and easier to comply with. The global biodiversity crisis means data need to be collected ever faster, but biopiracy is not the answer and undermines the credibility of science and researchers. It is critical to find a modus vivendi that promotes compliance with regulations and scientific progress.     

In Vitro Degradation and Cytotoxicity Response of Biobased Nanoparticles Prepared by Thiol-ene Polymerization in Miniemulsion

Journal of Polymers and the Environment - Biodegradability is a key feature for the application of polymeric devices in medicine. This study reports an experimental and theoretical study of the...     

Characterization, leachability and valorization through combustion of residual chars from gasification of coals with pine

This paper presents the study of the combustion of char residues produced during co-gasification of coal with pine with the aim of characterizing them for their potential use for energy. These residues are generally rich in carbon with the presence of other elements, with particular concern for heavy metals and pollutant precursors, depending on the original fuel used.The evaluation of environmental toxicity of the char residues was performed through application of different leaching tests (EN12457-2, US EPA-1311 TCLP and EA NEN 7371:2004). The results showed that the residues present quite low toxicity for some of pollutants. However, depending on the fuel used, possible presence of other pollutants may bring environmental risks.The utilization of these char residues for energy was in this study evaluated, by burning them as a first step pre-treatment prior to landfilling. The thermo-gravimetric analysis and ash fusibility studies revealed an adequate thermochemical behavior, without presenting any major operational risks.Fluidized bed combustion was applied to char residues. Above 700 °C, very high carbon conversion ratios were obtained and it seemed that the thermal oxidation of char residues was easier than that of the coals. It was found that the char tendency for releasing SO₂ during its oxidation was lower than for the parent coal, while for NO_X emissions, the trend was observed to increase NO_X formation. However, for both pollutants the same control techniques might be applied during char combustion, as for coal. Furthermore, the leachability of ashes resulting from the combustion of char residues appeared to be lower than those produced from direct coal combustion.     

The ability of selected cladoceran species to utilize domestic wastewaters in Mexico City

The population growth patterns of four cladocerans, viz. Alona rectangula, Ceriodaphnia dubia, Moina macrocopa and Daphnia pulex on wastewaters from a treatment plant at Iztacalco, Mexico City were analyzed in this study. Crude wastewater (tank A) did not support A. rectangula and all animals in the replicates died after 5 days. A. rectangula with partially treated wastewater (tank B) showed growth curves similar to controls where algal density was 1 x 10(6) cells ml(-1). With wastewater from tank C (last stage before treatment with purifying agents such as chlorine), the populations maintained a low density (7 ind. ml(-1)). In wastewaters from tanks A and B, C. dubia showed no positive population growth, but in water from tank C, they maintained a low density (2 ind. ml(-1)). D. pulex showed no positive growth in all replicates involving wastewater. Only in controls (diet of algae Chlorella), the population density increased with time. M. macrocopa showed higher population growth in crude wastewaters than controls. Partially treated wastewater from tank B also resulted in a greater population growth than in the controls. However, when wastewater from the tank C was used, the population declined after day 12. Under comparable conditions, A. rectangula reached much higher peak abundances (55 ind. ml(-1)) than the rest of the cladoceran species. The rates of population growth (r) of the tested cladoceran species followed trends similar to the peak population densities. A. rectangula had the highest growth rates (0.25 per day) in controls and from the wastewater from tank B. The r-values were negative for A. rectangula and C. dubia in crude wastewater. For M. macrocopa the r-values were higher (0.19) in crude wastewater than in algae (0.15). However, r-values of M. macrocopa became negative when cultured in treated wastewater from tank C.     

Study of the contaminant transport into granite microfractures using nuclear ion beam techniques

Hydrated bentonite is a very plastic material and it is expected to enter in the rock microfractures at the granite/bentonite boundary of a deep geological high-level waste repository. This process is enhanced by the high swelling pressure of the clay. Since bentonite has a very good sorption capability for many radionuclides, the displacement of the clay might lead to a "clay-mediated" contaminant transport into the rock. The aim of this work is to study the contaminant transport into granite microfractures using nuclear ion beam techniques, and to determine to what extent the clay can favour it. To do so, bentonite previously doped with uranium, cesium and europium was put in contact with the surface of granite sheets. Granite sheets contacted with non-doped bentonite and with radionuclide solutions were also prepared as references. This allowed analysing the differences in the diffusion behaviour of the three systems: clay, radionuclides and clay plus radionuclides. A combination of Rutherford backscattering spectrometry (RBS) and other nuclear ion-beam techniques such as particle-induced X-ray emission (PIXE) and microPIXE was used to study the depth and lateral distribution of clay and contaminants inside granite. It was also tried to evaluate not only the diffusion depth and diffusion coefficients but also the different areas of the granite where the diffusants have a preferential access.     

Influence of Fibers on the Mechanical Properties of Cassava Starch Foams

The utilization of renewable resources in packaging can provide solutions to ecological problems such as waste quantity. Agricultural resources are alternative raw materials, among which there is starch, a natural polysaccharide that can be used to form resistant foam under wet and warm conditions. The starch foam is obtained by thermo pressing process where cassava starch, water and additives are processed to form a rigid structure by swelling, gelatinization and network formation. Natural fibers can be used to improve the mechanical properties of starch foams. In this project was investigated the influence of the addition of fibers in the levels of 1, 2 and 3% of cassava (short fiber) and 1, 2 and 3% of wheat fiber (powered fiber) in the starch dough. The foams were characterized by physical methods of strength, flexibility, density and by Scanning Electron Microscopy (SEM). The increase in fibers quantity has resulted in foams with higher density and less flexibility, whatever the fiber type. Most fibers quantity did not improve the foam strength. Foam made with 1% of cassava fiber showed higher compression strength; by increasing the percentage quantity there was a decrease on the compression resistance. Foam made with wheat fiber presented a lower result in 2%. The fiber type had no statistical significance in strength, flexibility and density foam. Only the fiber quantity was significant. The results showed that both fibers presented limited dimensions to improve the reinforcement of the starch foams up to 1%.