Evaluating the urban climate of a typically tropical city of northeastern Brazil

This study attempted to assess a bioclimate index and the occurrence of an urban heat island in the city of Campina Grande, northeastern Brazil, using data taken from mobile measurements and Automatic Weather Stations (AWS). The climate data were obtained during two representative months, one for the dry season (November 2005) and one for the rainy season (June 2006) at seven points in an urban area. Ten-minute air temperatures recorded by an AWS installed in urban areas were compared to those from a similar station located in a suburban area to assess the urban heat island (UHI). The data were collected using a 23X data logger (Campbell Scientific, Inc.) programmed for collecting data every second. The thermal discomfort level was analyzed by Thom’s discomfort index (DI), and an analysis of variance was applied for assessing if there was any statistically significant difference at the 1% and 5% significance level of thermal comfort among points. Mann–Kendall statistical test was used for identifying possibly significant trends in a time series for air temperature, relative humidity, and class A pan evaporation for the city of Campina Grande. The present study found UHI intensities of 1.48°C and ??0.7°C for the months taken as representative of the dry and rainy seasons, respectively. Summer in the city has partially comfortable conditions while the winter is fully comfortable. There are significant changes in DI hourly values between seasons. Only during the rainy season did all points of the city have a comfortable condition until 8:19 h, at which time they become partially comfortable for the rest of the day. Results indicated that there was a 1.5°C increase in air temperature and a 7.2% reduction in relative humidity throughout the analyzed time series. The DI also showed a statistically significant increasing trend (Mann–Kendall test, p?<?0.01) for the dry and rainy seasons and annual period of approximately 1°C in the last 41 years in the city of Campina Grande.     

How size relates to oxygen consumption,ammonia excretion,and ingestion rates in cold (<Emphasis Type="Italic">Enteroctopus megalocyathus</Emphasis>) and tropical (<Emphasis Type="Italic">Octopus maya</Emphasis>) octopus species

The scaling of metabolic rates with body mass is one of the best known and most studied characteristics of aquatic animals. Herein, we studied how size is related to oxygen consumption, ammonia excretion, and ingestion rates in tropical (Octopus maya) and cold-water (Enteroctopus megalocyathus) cephalopod species in an attempt to understand how size affects their metabolism. We also looked at how cephalopod metabolisms are modulated by temperature by constructing the relationship between metabolism and temperature for some benthic octopod species. Finally, we estimated the energy balance for O. maya and E. megalocyathus in order to validate the use of this information for aquaculture or fisheries management. In both species, oxygen consumption and ammonia excretion increased allometrically with increasing body weight (BW) expressed as Y = aBW ^b . For oxygen consumption, b was 0.71 and 0.69 for E. megalocyathus and O. maya, respectively, and for ammonia excretion it was 0.37 and 0.43. Both species had low O/N ratios, indicating an apparent dependence on protein energy. The mean ingestion rates for E. megalocyathus (3.1 ± 0.2% its BW day⁻¹) and O. maya (2.9 ± 0.5% its BW day⁻¹) indicate that voracity, which is characteristic of cephalopods, could be independent of species. The scope for growth (P = I − (H + U + R) estimated for E. megalocyathus was 28% higher than that observed in O. maya (320 vs. 249 kJ day⁻¹ kg⁻¹). Thus, cold-water cephalopod species could be more efficient than tropical species. The protein and respiratory metabolisms of O. maya, E. megalocyathus, and other octopod species are directly dependent on temperature. Our results offer complementary evidence that, as Clarke (2004) stated, the metabolic response (R and U) cannot be determined mechanistically by temperature, as previously proposed (Gillooly et al. 2002).     

Quantification of carbamazepine and atrazine and screening of suspect organic contaminants in surface and drinking waters

A new approach for the identification of suspect trace organic contaminants in drinking and surface waters is presented. Samples were initially analyzed using a target determination method for two contamination tracers, carbamazepine (CBZ) and atrazine (ATZ). This method used offline solid-phase extraction and online solid-phase extraction techniques coupled to liquid chromatography-triple quadrupole mass spectrometry to accelerate the sample preparation process and improve method performance. CBZ and ATZ were found respectively in 31% and 56% of the samples, and concentrations were usually <20 ng L⁻¹. These samples were re-analyzed with a similar method on a quadrupole time-of-flight mass spectrometer to identify suspect contaminants by means of exact mass measurements and isotope patterns. A database of 264 common organic contaminants was built and used in conjunction with a Molecular Feature algorithm to identify the presence of these substances in drinking and surface water collected from different sources at various locations across Canada. Several organic contaminants were identified in the samples, but only the presence of caffeine, desethylatrazine, simazine and venlafaxine could be verified by comparison to pure standards. The presence of desethylatrazine was also confirmed by MS/MS experiments. These results suggest that target analysis for tracers of organic contamination may be a helpful tool to prioritize samples which should be further screened for suspect contaminants. This study also shows that the combination of separation techniques (offline and online SPE, LC) contribute to advance the applicability of high-resolution mass spectrometry for the identification of trace organic contaminants by accelerating the preparation step, reducing complexity and increasing analyte concentrations for optimal detection.     

Effects of spatial and temporal scales on cultural services valuation

The monetary valuation of ecosystem services has proved to be a powerful tool for influencing management decisions, as it can be used to quantify the relative importance of various ecosystem functions. However, these valuation methods are rarely implemented with adequate care; in particular, they do not consider spatial and temporal variations in the services offered and demanded. This paper examines the effect of heterogeneity on the valuation of cultural services offered by the Doñana natural protected area in Spain. We apply the zonal travel cost method at various spatial scales, and the individual travel cost method at various temporal scales. We conclude that economic valuation techniques must account for spatial and temporal heterogeneity if they are to provide accurate and realistic information.     

Air pollution impacts of speed limitation measures in large cities: The need for improving traffic data in a metropolitan area

Assessing the effects of air quality management strategies in urban areas is a major concern worldwide because of the large impacts on health caused by the exposure to air pollution. In this sense, this work analyses the changes in urban air quality due to the introduction of a maximum speed limit to 80 km h^?1 on motorways in a large city by using a novel methodology combining traffic assimilation data and modelling systems implemented in a supercomputing facility. Albeit the methodology has been non-specifically developed and can be extrapolated to any large city or megacity, the case study of Barcelona is presented here. Hourly simulations take into account the entire year 2008 (when the 80 km h^?1 limit has been introduced) vs. the traffic conditions for the year 2007. The data has been assimilated in an emission model, which considers hourly variable speeds and hourly traffic intensity in the affected area, taken from long-term measurement campaigns for the aforementioned years; it also permits to take into account the traffic congestion effect. Overall, the emissions are reduced up to 4%; however the local effects of this reduction achieve an important impact for the adjacent area to the roadways, reaching 11%. In this sense, the speed limitation effects assessed represent enhancements in air quality levels (5–7%) of primary pollutants over the area, directly improving the welfare of 1.35 million inhabitants (over 41% of the population of the Metropolitan Area) and affecting 3.29 million dwellers who are potentially benefited from this strategy for air quality management (reducing 0.6% the mortality rates in the area).     

Emission profiles of polychlorinated dibenzodioxins, polychlorinated dibenzofurans (PCDD/Fs), dioxin-like PCBs and hexachlorobenzene (HCB) from secondary metallurgy industries in Portugal

This paper reports, for the first time, a study of dioxin emissions from 10 siderurgies and metallurgies, secondary copper, aluminum and lead metallurgies, in Portugal. The study reports the emission factors and total emission amounts of PCDD/Fs, dioxin-like PCBs and hexachlorobenzene (HCB). The congener patterns were characterized and are discussed. The results showed that the total amount of PCDFs is higher than PCDDs in flue gas of each industrial unit. The toxic equivalent emission factors of pollutants emitted are 3098-3338 ngI-TEQt(-1) for PCDD/Fs and 597-659 ng I-TEQt(-1) for dioxin-like PCBs in siderurgies production (total estimated emission amounts released to atmosphere of 3.9-4.5 g I-TEQyr(-1)), 50-152 ng I-TEQt(-1) for PCDD/Fs and 24-121 ng I-TEQt(-1) for dioxin-like PCBs in ferrous foundries production (total estimated emission amounts released to atmosphere of 0.0010-0.0016 g I-TEQyr(-1)) and 5.8-5715 ng I-TEQt(-1) for PCDD/Fs and 0.49-259 ng I-TEQt(-1) for dioxin-like PCBs in non-ferrous foundries production (total estimated emission amounts released to atmosphere of 0.00014-0.12 g I-TEQyr(-1)). The HCB emission from siderurgies production is 0.94-3.2 mg t(-1) (total estimated emission amounts released 0.94-3.8 g yr(-1)), being much smaller, residual, in the emissions of the other types of plants (0.0012-0.026 mg t(-1) production and total estimated emission amounts released to atmosphere of 0.013-1.7 mg yr(-1)).     

Population characteristics of young African women influencing prenatal exposure to DDT (Manhiça, Mozambique)

The concentrations of dichlorodiphenyltrichloroethane (DDT) compounds in cord blood of 214 children born between 2003 and 2006 in Manhiça (Mozambique) have been determined. In this time interval, corresponding to the period before DDT reintroduction for indoor residual spraying, the observed values averaged 0.8 and 0.4 ng/ml for 4,4′-dichlorodiphenyldichloroethylene (4,4′-DDE) and 4,4′-DDT, respectively, and were similar to those found in western countries. However, the 4,4′-DDT/4,4′-DDE ratio was high indicating that the inputs of these compounds arriving to children in utero originated from recent uses of the insecticide. The strongest factor affecting DDT concentration was parity. A well-defined decreasing concentration trend was observed for the cord blood concentrations in the period of study. The trend was also observed for multiparae and primiparae mothers independently. Children from multiparae women showed much lower concentrations than primiparae women. Children from mothers with secondary school level exhibited lower concentrations of these pesticides than mothers with lower degree of education.     

Impact of cypermethrin on stream fish populations under field-use in biotech-soybean production

The impact of biotech-soybean technology on freshwater ecosystems is being evaluated in the Rolling Pampas region, Argentina. The effect of cypermethrin, the main soybean insecticide, on low-order temperate-stream fish populations was investigated for two consecutive crop cycles under field-use conditions in biotech-soybean production. Cypermethrin was unable to induce mortality or behavioral effects on any of the fish species resident in a first-order stream across a crop field (pulsed acute exposure scenario) sprayed according to conventional practices. No spatially or temporally dependent effects were observed on population parameters (size-class structure, abundance, survival, sex and immature/mature ratio, condition factor) of resident or caged Cnesterodon decemmaculatus after spraying or rainfall events, not even one year after, at the beginning of the next crop cycle. Although cypermethrin was "very highly toxic" to C. decemmaculatus in laboratory water (96h-LC(50)=0.43microg/l), its toxicity was reduced in filtered (78%) and unfiltered (92%) stream water. Changes in LC(50) values were mainly correlated with the OC content of each water fraction (r(2)=0.99; p<0.01; n=9), showing that both DOC and TOC contributed proportionally to toxicity reduction. Protective effects of stream water (12-fold reduction LC(50) values) explained the lack of effects on fish populations in the field, despite cypermethrin water concentrations after spraying reached values comparable with the 96h-LC(50). Therefore, cypermethrin under field-use conditions in transgenic-soybean production represents a low risk of acute exposure for fish populations inhabiting low-order temperate-streams rich in TOC. The relationship between LC(50) and TOC could be a convenient way to improve risk estimation based on laboratory toxicity testing.     

Biomonitoring spatial and temporal impact of atmospheric dust from a cement industry

The objective of this work was to evaluate the spatial and temporal impact of dust-pollution in the vicinity of a cement industry, located in an area with dry climate. The spatial impact integrated over time was evaluated from the concentrations of Ca, Fe and Mg in in-situ Xanthoria parietina. The temporal pattern was assessed through one-month transplants of the lichen Ramalina canariensis. Four potential sources of atmospheric dust were evaluated: the limestone-quarry; the unpaved roads, the deposit area and the cement mill. Calcium concentration in lichens was considered the best cement-dust indicator. Different types of dust (clinker and grinded-limestone-dust) resulted in different time-patterns of Ca accumulation, which was also related with the different influence that wet and dry periods have in the lichen accumulation process. The dust pollution was found to be deposited locally and dependent on: the nature of dust particles and the volume and frequency of precipitation.