Using biochar for remediation of soils contaminated with heavy metals and organic pollutants

Soil contamination with heavy metals and organic pollutants has increasingly become a serious global environmental issue in recent years. Considerable efforts have been made to remediate contaminated soils. Biochar has a large surface area, and high capacity to adsorb heavy metals and organic pollutants. Biochar can potentially be used to reduce the bioavailability and leachability of heavy metals and organic pollutants in soils through adsorption and other physicochemical reactions. Biochar is typically an alkaline material which can increase soil pH and contribute to stabilization of heavy metals. Application of biochar for remediation of contaminated soils may provide a new solution to the soil pollution problem. This paper provides an overview on the impact of biochar on the environmental fate and mobility of heavy metals and organic pollutants in contaminated soils and its implication for remediation of contaminated soils. Further research directions are identified to ensure a safe and sustainable use of biochar as a soil amendment for remediation of contaminated soils.     

Effects of light, microbial activity, and sediment resuspension on the phosphorus immobilization capability of drinking water treatment residuals in lake sediment

Drinking water treatment residuals (WTRs), nonhazardous by-products generated in a drinking water treatment plant, can be reused to immobilize phosphorus (P) to control the internal P loading from lake sediments for eutrophication control. Reasonably, before practical application, it is essential to determine the P immobilization capability of WTRs in lake sediments under various conditions. In this work, laboratory scale experiments were conducted to investigate the effects of light, microbial activity, and sediment resuspension on the P immobilization capability of WTRs. The results suggested that absence of light, low microbial activity, and sediment resuspension can increase the internal P loading from lake sediments. WTRs can, however, reduce the internal P loading significantly. Further analysis demonstrated that WTRs can stabilize P, decreasing the P bioavailability in the sediments under varied conditions. WTRs also presented little undesirable effects on the dissolved oxygen levels and pH of overlying water. Therefore, light, microbial activity, and sediment resuspension have little effect on the P immobilization capability of WTRs in lake sediments.     

pH对活化前后废弃铁铝泥吸附不同种磷动力学的影响

实验研究了300℃热活化前后的给水厂废弃铁铝泥（R-FARs和H300-FARs）对正磷酸盐、聚磷酸盐和有机磷酸盐的吸附动力学特性,并考察pH对不同磷吸附动力学的影响。结果表明,pH对不同磷吸附动力学过程的影响趋势相似,即低pH有利于吸附。准二级动力学模型能够更真实地反映不同磷在R-FARs和H300-FARs的吸附动力学行为,由拟合结果可知焦磷酸盐和六肌醇磷酸盐的初始吸附速率相对较大,而甘油磷酸盐最小;且活化作用明显提高了不同磷的初始吸附速率,并减弱了pH对初始吸附速率的影响。不同磷的吸附速率受到液膜扩散、颗粒内扩散和吸附反应三者共同控制,其中吸附反应是主要的控制步骤。     

添加剂对炭黑颗粒润湿和沉降性能的影响

为提高湿式除尘装置对炭黑颗粒物的去除效率,通过向吸收液中添加复配表面活性剂以提高吸收液对炭黑的润湿性,投加絮凝剂使进入吸收液的炭黑颗粒发生凝聚和沉降,从而使吸收液得以循环利用。其中表面活性剂的复配以非离子表面活性剂月桂醇聚氧乙烯（9）醚（AEO-9）为主,与十二烷基苯磺酸钠（SDBS）、十六烷基三甲基溴化胺（CTAB）和壬酚基聚氧乙烯醚（TX-10）分别复配,筛选出复配效果最好的一组复配液;然后投加絮凝剂,探讨絮凝剂的加入对吸收液中炭黑颗粒物絮凝沉降的影响。结果表明,在AEO-9浓度为0．05mmol／L,TX-10浓度为0．09mmol／L时,吸收液的表面张力最小,为36．75mN／m;投加无机絮凝剂聚合氯化铝（PAC）浓度为100mg／L时,经15min沉降,炭黑的沉降率可达88．1％,上清液中悬浮颗粒的平均粒径为6．36μm。     

2种新分离微藻的生长、氮磷去除和营养特性的比较研究

为了解2种新分离微藻的净化和资源化潜力,研究比较了其生长、氮磷去除和营养特性。结果表明,栅藻和月牙藻的最大生物量（干重）分别为0．78g／L和0．53g／L;最大生物量（干重）增长速率分别为0．05g／（L·d）和0．03g／（L·d）。培养至第23天,栅藻和月牙藻对TN的去除率分别为85．1％和72．5％;对TP的去除率为82．6％和79．7％,但栅藻较月牙藻更易释放较多的No2--N进入藻液。稳定期时,栅藻、月牙藻的粗蛋白质含量和粗蛋白产量（干重）分别为31．8％、19．2％和0．24g／L、0．09g／L;粗脂含量和粗脂产量（干重）分别为7．81％、9．26％和0．06g／L、0．05g／L。综上,与月牙藻相比,栅藻具有明显的生长、氮磷去除和营养优势,在进行水产养殖废水的净化和资源化利用上可作为优选藻种。     

湿法净化黑烟中添加剂对炭黑沉降性能的影响

湿法净化黑烟中炭黑颗粒物的关键在于降低吸收液的表面张力并以高性能絮凝剂使其从溶液中絮凝、沉降以利于分离。选用十六烷基三甲基溴化胺(CTAB)为主要表面活性剂,使之与十二烷基苯磺酸钠(SDBS)和月桂醇聚氧乙烯(9)醚(AEO-9)进行复配实验,研究了复配液的表面张力,再向最低表面张力的复配表面活性剂溶液中投加絮凝剂聚合氯化铝(PAC)和聚丙烯酰胺(PAM),探讨絮凝剂的添加对黑烟颗粒沉降和絮凝的影响.实验结果表明:同时添加表面活性剂CTAB,SDBS和PAC,并使之浓度分别为0.5 mmol/L,0.4 mmol/L和200 mg/L时,炭黑颗粒的沉降效果最好,沉降率高达94%,且絮凝体较大,沉降时间仅为2 min。     

化学沉淀法强化常规工艺应急去除水中的镉

在常规工艺基础上,通过投加氢氧化钠,实验进行了应急去除重金属镉的研究。实验结果表明,该方法能有效去除饮用水水源的镉,效果稳定,可进行应急处理。对pH、镉初始浓度和混凝剂投加量3个影响因素的灰色关联分析表明,3个因素对镉去除效果影响的大小排序为:滤后水pH>混凝剂投加量>镉初始浓度。在水源镉突发污染时,在原有常规水处理工艺基础上,通过控制滤后水pH可实现对重金属镉的去除,pH的控制值与水源水质有关。     

两种AHLs信号分子对生物膜法养殖污水处理条件下水体内环境的影响

为提高生物膜法处理养殖污水的效果,对不同信号分子条件下的生物膜处理情况进行研究。在室内循环水养殖系统中,设定3个实验组和1个对照组,分别添加乙醇、C6-HSL、N-3-oxo-C8-HSL和蒸馏水,并在模拟过程中取样分析。实验结果表明,3个实验组附着基上的生物量明显多于对照组,尤其是添加N-3-oxo-C8-HSL组产生的生物量约为对照组的6倍;经添加C6-HSL和N-3-oxo-C8-HSL处理的养殖水体中,亚硝酸盐最终浓度比对照组低28.6%,但无机磷浓度稍高。数据因子分析结果表明,实验过程中(9～27 d),添加AHLs信号因子C6-HSL和N-3-oxo-C8-HSL两组养殖水体内环境的总体得分较高,说明养殖水体的内环境处于较好状态。     

生物基质活性炭对挥发性有机物的吸附

以咖啡渣和柚子皮生物基质为原料用磷酸活化法制成活性炭,探讨了制备条件对活性炭制备的影响,并研究了其对正丁烷的吸附行为。磷酸活化过程中磷酸的用量为生物基质质量的1.5倍为宜,咖啡渣采用超声干燥法,柚子皮采用水热法制备。制备的活性炭对正丁烷均有较好的吸附能力,以柚子皮为原料、磷酸用量为原料质量两倍活化制成的活性炭吸附性能最佳,最大吸附量约为商用活性炭的2倍。吸附剂均能较好地与兰格缪尔曲线相拟合,计算了不同正丁烷覆盖度下的等量吸附热,其变化规律与吸附曲线变化规律相一致。     

混凝沉淀去除丙烯酸丁酯废水浊度物质

采用混凝沉淀法去除丙烯酸丁酯废水中的浊度物质,比较6种混凝剂的去除效率,确定聚合氯化铝为适宜混凝剂,并选用阳离子型聚丙烯酰胺作为助凝剂。研究结果表明,聚合氯化铝和阳离子型聚丙烯酰胺的优化投加量分别为150 mg/L和20 mg/L,优化pH值为4～5,水温20～40℃,快速搅拌速度200～400 r/min,搅拌时间1～3 min,慢速搅拌速度50～80 r/min,搅拌时间5～15 min。在以上条件下,可使出水浊度从3 000 NTU左右降至1 NTU左右,同时也实现了废水中胶体物质的大量去除。