The Radial Distribution of Sulfur Dioxide Source Strength and Concentration in Nashville

This progress report describes the National Air Pollution Technical Information Center currently under development in the Division of Air Pollution, Public Health Service. It briefly reviews the report "Science, Government, and Information" (Weinberg Report) and the White House delegation of responsibility to the Department of Health, Education, and Welfare for handling air pollution technical information.     

Effect of mono-ortho and di-ortho substituted polychlorinated biphenyl (PCB) congeners on leopard frog survival and sexual development

We tested the effect of mono-ortho and di-ortho PCB congeners on northern leopard frog (Rana pipiens) hatching success, survival and sexual development. Embryos and tadpoles were exposed to two levels (0.5 and 50 microg/l) of two PCBs. PCBs 101 and 70 were selected because they were present in amphibians collected in the Fox River-Green Bay ecosystem and they have the theoretical structural requirements to be able to bind to the estrogen receptor and mediate estrogenic responses. The exposure of leopard frog embryos and tadpoles to PCB 70 and 101 did not significantly affect hatchability, survival, deformities or growth. There were significant departures from the expected 50:50 sex ratio in tadpoles/froglets exposed to PCB 101 and PCB 70. In all the cases of significant departure, the bias was towards higher number of females. Decrease in the proportion of male gonads and increase in the proportion of intersex gonads were observed with increasing PCB tissue concentrations. The effects of PCB congeners on sexual differentiation occur at concentrations higher than observed in frogs in the Fox River/Green Bay ecosystem.     

Safety challenges in view of the upcoming hydrogen economy: An overview

If produced and arranged in the right way with carbon dioxide as a possible but permanently removed by-product, hydrogen as a new, large scale, applicable energy carrier promises significant reductions of carbon dioxide emissions. It is light, non-toxic, and clean burning. In different parts of the world, viz. United States, Japan, and Europe, programs have started some years ago to investigate hazardous properties of hydrogen in more detail and to develop special safety measures where necessary. Recently, in September 2009, the third International Conference on Hydrogen Safety (3rd ICHS) was held at Corsica, France. CFD tools have been adapted to describe hydrogen dispersion and explosion. Field tests have been carried out, an incident databank has been founded, knowledge gaps were defined, and risk analysis methods reviewed. The latter are required for drafting installation guidelines and measures for safe distances in land-use planning and licensing of hydrogen storage locations, pipelines, and re-fuelling stations. Yet some challenges remain. The paper will summarize present results and will address hydrogen related issues where more knowledge is needed to reduce uncertainty and improve the quality of risk control.     

The impact of coal utilization in Texas under the National energy plan

The paper describes the results of a study of the impact of the National Energy on the trend towards increased utilization of coal and lignite in Texas with forecasts of increased coal and lignite utilization for the electric utility and industrial sectors. Environmental impacts of this increased coal and lignite use are projected in terms of increased air pollutant emissions and air quality impacts. Economic costs of compliance with alternative source emission regulations are also projected for the electric utility industry.Lignite consumption in Texas under the National Energy Plan is projected to increase from the present 13 million metric tons in 1976 to 57 million metric tons annually by 1985. Sub-bituminous coal consumption in Texas is projected to increase from 1 million metric per year in 1976 to 49 million metric tons per year in 1985. Bituminous coal consumption in Texas is expected to increase from less than one million metric tons per year in 1976 to about 3 million metric tons per year in 1985.Major increases in sulfur oxides emissions from coal and lignite combustion in Texas can be expected by 1985 of up to 1.5 × 10⁹ kg per year without controls and 0.2 × 10⁹ kg per year with controls. Increases in acid precipitation formation will result in north-east Texas from extensive lignite usage for electric power generation as a detriment to agriculture. The photochemical air pollution problem in the Houston area will probably worsen primarily because of increased nitrogen oxides and sulfur oxides emissions because of industrial coal combustion. Capital costs of air pollution controls in Texas for coal-fired utility boilers are estimated as up to U.S. $3.9 billion by 1985, with total operating costs of up to U.S. $1.2 billion per year.     

Development of quantitative estimates of uncertainty in environmental risk assessments when the scientific data base is inadequate

The reasons for developing quantitative estimates of uncertainty in environmental risk assessments are discussed along with a method for developing them which involves scientific judgement. In the situation considered here the regulatory needs are ahead of the science, which makes the development of the estimates on uncertainty more difficult, but not impossible. Quantitative estimates for all uncertainties involved in the estimation of risk resulting from exposure to volatile organic compounds (VOCs) in drinking water are developed and tabulated. By far the largest contribution to the uncertainty in the risk estimates for VOCs in drinking water are due to uncertainty in the extrapolation of the dose-response curve to low levels. The uncertainty due to extrapolation is on the order of 10⁴ and 10⁶. Other components of the analysis may contribute uncertainties of a few orders of magnitude. In general the largest uncertainties are in the toxicological data base and the manipulation of it needed to estimate risk. The data base and manipulations needed to estimate exposure due to VOCs in drinking water were at the more an order to magnitudes in uncertainty.     

Time and cost characterisation of emissions from non-road diesel equipment for infrastructure projects

The construction process contributes to pollutant emissions, particularly through the operation of diesel- and gasoline-powered equipment. In the past decade, a series of investigations were undertaken to quantify these emissions for a variety of non-road construction equipment performing different activities and undergoing different duty cycles, and a model to estimate quantities of six types of pollutant was developed. This paper uses that model to estimate emissions for four street and utility construction projects which no one has done previously. We combined information from company records with standard construction industry manuals to estimate total emissions for the projects and to examine the pollution patterns and magnitudes. The street construction projects all had similar emission profiles with a large peak at the beginning and a steady output of emissions throughout the duration of the project. For example, in two of the projects studied, half of all CO₂ emissions were produced before the projects were 40% completed. Results showed that demolition and earthwork are the activities with the largest contribution. The equipment types with the largest contribution are backhoes, front-end loaders, bulldozers and trenchers. Trenchers, for example, produced 30% of all emissions on the projects on which they were used.     

Research priorities for managing the impacts and dependencies of business upon food,energy, water and the environment

Delivering access to sufficient food, energy and water resources to ensure human wellbeing is a major concern for governments worldwide. However, it is crucial to account for the ‘nexus’ of interactions between these natural resources and the consequent implications for human wellbeing. The private sector has a critical role in driving positive change towards more sustainable nexus management and could reap considerable benefits from collaboration with researchers to devise solutions to some of the foremost sustainability challenges of today. Yet opportunities are missed because the private sector is rarely involved in the formulation of deliverable research priorities. We convened senior research scientists and influential business leaders to collaboratively identify the top forty questions that, if answered, would best help companies understand and manage their food-energy-water-environment nexus dependencies and impacts. Codification of the top order nexus themes highlighted research priorities around development of pragmatic yet credible tools that allow businesses to incorporate nexus interactions into their decision-making; demonstration of the business case for more sustainable nexus management; identification of the most effective levers for behaviour change; and understanding incentives or circumstances that allow individuals and businesses to take a leadership stance. Greater investment in the complex but productive relations between the private sector and research community will create deeper and more meaningful collaboration and cooperation.     

Sustainable development conflict over freeway construction

Environmental disputes arise due to opposing views of various groups about their environmental concerns and their economic or developmental interests. Development and protection of the environment constitute two main contradictory objectives within the sustainable development paradigm, which are often in conflict. The decision support system, GMCR II, which implements the graph model for conflict resolution, is employed to model and analyze an environmental dispute arising over the construction of a new freeway between the Iranian capital, Tehran, and the city of Chalous located in the north of the country. This study demonstrates that the graph model for conflict resolution can be used as a methodology to promote a reasonable balance between economic development and environmental protection from a strategic viewpoint. In addition to systematically modelling the conflict by putting the existing information into proper perspective, it is shown how conflict analysis can be used for comparing alternative scenarios and predicting possible future outcomes. Readers should send their comments on this paper to: BhaskarNath@aol.com within 3 months of publication of this issue.     

Sensitivity of two dispersion models (AERMOD and ISCST3) to input parameters for a rural ground-level area source

As of December 2006, the American Meteorological Society/U.S. Environmental Protection Agency (EPA) Regulatory Model with Plume Rise Model Enhancements (AERMOD-PRIME; hereafter AERMOD) replaced the Industrial Source Complex Short Term Version 3 (ISCST3) as the EPA-preferred regulatory model. The change from ISCST3 to AERMOD will affect Prevention of Significant Deterioration (PSD) increment consumption as well as permit compliance in states where regulatory agencies limit property line concentrations using modeling analysis. Because of differences in model formulation and the treatment of terrain features, one cannot predict a priori whether ISCST3 or AERMOD will predict higher or lower pollutant concentrations downwind of a source. The objectives of this paper were to determine the sensitivity of AERMOD to various inputs and compare the highest downwind concentrations from a ground-level area source (GLAS) predicted by AERMOD to those predicted by ISCST3. Concentrations predicted using ISCST3 were sensitive to changes in wind speed, temperature, solar radiation (as it affects stability class), and mixing heights below 160 m. Surface roughness also affected downwind concentrations predicted by ISCST3. AERMOD was sensitive to changes in albedo, surface roughness, wind speed, temperature, and cloud cover. Bowen ratio did not affect the results from AERMOD. These results demonstrate AERMOD's sensitivity to small changes in wind speed and surface roughness. When AERMOD is used to determine property line concentrations, small changes in these variables may affect the distance within which concentration limits are exceeded by several hundred meters.     

Deactivation of titanium dioxide photocatalyst by oxidation of polydimethylsiloxane and silicon sealant off-gas in a recirculating batch reactor

We have studied deactivation of titanium dioxide (TiO2) photocatalyst by oxidation of polydimethylsiloxane and silicone sealant off-gas in a recirculating batch reactor. Polydimethylsiloxane vapor is a model indoor air pollutant. It does not adsorb strongly on TiO2 in the dark, but undergoes oxidation when the ultraviolet (UV) photons are also present. Commercial silicone (room-temperature vulcanizing) sealant off-gas is an actual indoor air pollutant subject to short-term spikes in concentration. It does adsorb on the TiO2 surface in the dark, but UV photons also catalyze its oxidation. The oxidation of the Si-containing vapors was monitored using a Fourier transform infrared spectroscope equipped with a gas cell. Subsequent to each incremental exposure, a hexane oxidation reaction was performed to track the titania catalyst's activity. The exposures were repeated until substantial deactivation was achieved. We have also documented the regenerative effect of washing the catalyst surface with water. Surface science techniques were used to view the topography of the catalyst and to identify the elements causing the deactivation. Procedural observations of interest in the context of our recirculating batch reactor include the following: the rate of oxidation of hexane was used to assess the activity of a photocatalyst sample; hexane is an appropriate choice of a probe molecule because it does not adsorb in the dark and it undergoes photocatalytic oxidation (PCO) completely, forming CO2; and hexane does not deactivate the photocatalyst surface.