Toxicity of carbaryl,diquat dibromide,and fluoranthene,individually and in mixture,to larval grass shrimp,Palaemonetes pugio

This study examined the toxicity of two pesticides (carbaryl and diquat dibromide) and one polycyclic aromatic hydrocarbon (fluoranthene), both singly and in mixture, to grass shrimp larvae (Palaemonetes pugio). These three chemicals are all present in coastal environments and can easily enter estuarine ecosystems. Fluoranthene was the most toxic chemical with a 96-h LC₅₀ value of 32.45 μ g/L, followed by carbaryl (43.02 μ g/L) and diquat dibromide (1624 μ g/L). In the chemical mixture tests, the binary carbaryl/diquat dibromide mixture and the ternary carbaryl/diquat dibromide/fluoranthene mixture had additive results.     

A Simple Model for SO2 Removal in the Duct Injection Process

Abstract

In the In-Duct Injection Process, a lime slurry is sprayed into the flue gas between the air preheater and solids collection equipment, and about 30-60 percent removal of SO₂ is achieved. A simple model of this process has been developed based on heat and mass transfer theories, and this model was fitted to the data obtained at proof-of-concept test units. Data taken with separate injection of dry lime and water were also modeled, but the SO₂ removal was less than for slurry injection, probably because of incomplete capture of lime particles by the water droplets.     

Cell-free DNA fetal fraction in twin gestations in single-nucleotide polymorphism-based noninvasive prenatal screening

Objectives

The performance of noninvasive prenatal screening (NIPS) for fetal aneuploidy in twin pregnancies is dependent on the amount of placentally derived cell-free DNA, the “fetal fraction (FF),” present in maternal plasma. We report FF values in monozygotic (MZ) and dizygotic (DZ) pregnancies.

Methods

We reviewed FF in pregnancies at 10 to 20 completed weeks gestational age based on single-nucleotide polymorphism (SNP)-based NIPS where zygosity was routinely established in twin pregnancies. The cohort included 121 446 (96.3%) singleton, 1454 (1.2%) MZ, and 3161 (2.5%) DZ pregnancies. For DZ twins, individual FFs were measured.

Results

Combined FF for DZ and MZ fetuses were 35% and 26% greater than singletons, respectively. The individual FF contributions from each fetus in DZ twins were, on average, 32% less than singletons. FF in DZ twin pairs were moderately correlated (Pearson correlation coefficient.66). When a threshold of 2.8% FF was applied to define uninterpretable results, 1.7% (2102/121 446) of singletons, 0.8% (11/1454) of MZ pairs, and 5.6% (178/3161) of DZ pairs were uninterpretable.

Conclusion

For optimal aneuploidy NIPS in twin pregnancies, zygosity should be established and in DZ twins FF for both fetuses should be determined to identify those cases where results can be reliably interpreted.     

Dioxion-/Furan-’Verbrennungsprofile’ aus Hochtemperaturprozessen

Present knowledge assumes that different mechanisms acting downstream in high temperature processes lead to the formation of polychlorinated dibenzo(p)dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs). Concerning the 17 2,3,7,8-Cl-substituted PCDD/F congeners in particular, there is new evidence for a single-step reaction type (recently reported in this publication series, of. also parts 1 and 2). A formation based on a combination of the several mechanisms, which have been proposed and discussed since 1985, becomes more and more unlikely. Qualitatively the PCDD/F formation downstream from high temperature processes depends rather on a thermodynamically forced single reaction step, and on pure statistical distribution quantitatively. This may be a new ‘Thermostat Synthesis’ instead of ‘de novo’.     

The NICE-Whyco technologies partnership: saving energy, dollars, and the environment in the metal plating industry

In partnership with the US Department of Energy’s Office of Industrial Technology, Whyco Technologies, Inc., has developed an innovative perforated plating barrel used in the plating of metal parts. This new technology employs a thin-walled construction, differing from the traditional thick-wall design required to provide adequate structural integrity. The thicker walls lowered the efficiency of transferring plating solution into and out of the barrel and diminished the electrical current pushed through the holes and onto the parts being plated. By machining pockets out of the traditional thick-walled perforated structure, Whyco produced a ‘honeycomb’ of staggered cells, allowing for the greatest number of holes per open area while maintaining structural integrity. Hydrodynamic pumping occurs during barrel rotation to create greater solution transfer than in traditional barrels. The Whyco barrel has higher current density plating, which leads to faster plating cycles, reduced bath concentration, and better plating of difficult chemistries such as in alloys. This new technology has helped the company reduce energy use by 16%, eliminate more than 480 tons/year of solid waste, and reduce wastewater by more than 17 000 gallons/day. The resulting cost savings total more than $500 000 annually. The company has manufactured and sold more than 275 of these barrels to other electroplating companies that are reporting up to a 40% increase in plating productivity and similar energy and environmental impacts.