Assessing non‐metro recovery across two continents: issues and limitations

Rural and remote areas of countries such as Australia and the United States are less well‐resourced and often poorer than their city counterparts. When a disaster strikes, therefore, their long‐term recovery can be impeded by being situated ‘over the horizon'. Nonetheless, they are likely to enjoy higher social capital, with ‘locals’ banding together to help restore economic and social life in the wake of a calamitous incident. At the same time, a repeat of extreme events, springing in part from alteration to the landscape through intense human occupation, threatens to derail sustainable recovery processes everywhere, suggesting that renewed emphasis needs to be placed on preparedness. Improved metrics are also required, spanning both pre‐ and post‐disaster phases, to determine effectiveness. Moreover, a focus on the ‘hardening’ of towns offers a better return in limiting damage and potentially hastens the speed of recovery should these places later fall victim to extreme events.     

Wistful wilderness: communication about ‘new’ nature in the Netherlands

Based on in-depth interviews, this article presents findings of a study centred on public communication regarding Tiengemeten, a Dutch island previously occupied by farmers. An answer is sought to the question of how visitors to Tiengemeten evaluate, according to their own experiences, the discourse of people involved in Tiengemeten from a policy and communication perspective. This study showed that visitors’ experiences do not always match the emotions appealed to in public communication materials. It is also suggested that people involved from a policy and communication perspective should refrain from using ‘heavily value-laden’ phraseology. For reasons of trust, this article suggests aligning public communication with genuine experiences of visitors. This is also necessary for avoiding scepticism of visitors as policy makers and communication professionals run a risk that public communication regarding nature becomes counterproductive.     

Phosphine by bio-corrosion of phosphide-rich iron

Phosphine is a toxic agent and part of the phosphorus cycle. A hitherto unknown formation mechanism for phosphine in the environment was investigated. When iron samples containing iron phosphide were incubated in corrosive aquatic media affected by microbial metabolites, phosphine was liberated and measured by gas chromatography. Iron liberates phosphine especially in anoxic aquatic media under the influence of sulfide and an acidic pH. A phosphine-forming mechanism is suggested: Phosphate, an impurity of iron containing minerals, is reduced abioticly to iron phosphide. When iron is exposed to the environment (e.g. as outdoor equipment, scrap, contamination in iron milled food or as iron meteorites) and corrodes, the iron phosphide present in the iron is suspended in the medium and can hydrolyze to phosphine. Phosphine can accumulate to measurable quantities in anoxic microbial media, accelerating corrosion and preserving the phosphine formed from oxidation.     

Analysis of macroinvertebrate assemblages in relation to environmental gradients among lotic habitats of California's Central Valley

We assessed relationships between environmental characteristicsand macroinvertebrate assemblages in lotic habitats of California's Central Valley with community metric and multivariate statistical approaches. Using canonical ordinationanalyses, we contrasted results when assemblage structure was assessed with macroinvertebrate metrics, as suggested for use inindices of biotic integrity, or with genera abundances. Our objectives were to identify metrics or taxa diagnostic of loticenvironmental stressors and compare the capacity of theseapproaches to detect stressors in order to suggest how they mightbe used to diagnose stressors. For macroinvertebrate metrics,redundancy analysis (RDA) extracted three axes correlated withchannel morphology and substrates. For genera abundances, canonical correspondence analysis (CCA) extracted two axescorrelated with soluble salts and with channel morphology andsubstrates but did not separate these gradients onto differentaxes. Cluster analyses identified five RDA and five CCA sitegroups, which exhibited differences for environmental variables,metrics, or genera abundances, and agreement between the analysesin partitioning of sites was greater than if sites were partitioned randomly. These approaches differ in their abilityto detect environmental stressors, because they measure differentaspects of assemblages and would be complementary in design ofnew metrics diagnostic of stressors.     

The acceptability of CO2 capture and storage (CCS) in Europe: An assessment of the key determining factors: Part 1. Scientific,technical and economic dimensions

The ACCSEPT project, which ran from January 2006 to December 2007, identified and analysed the main factors which have been influencing the emergence of CO₂ capture and geological storage (CCS) within the European Union (EU). The key clusters of factors concern science and technology, law and regulation, economics, and social acceptance. These factors have been analysed through interviews, a large-scale questionnaire conducted in 2006, and discussions in two stakeholder workshops (2006 and 2007). In Part I of this paper, we aim to distil the key messages and findings with regards to scientific, technical, legal and economic issues. There are no compelling scientific, technical, legal, or economic reasons why CCS could not be widely deployed in the forthcoming decades as part of a package of climate change mitigation options. In order to facilitate this deployment, governments at both the EU and Member State levels have an important role to play, in particular in establishing a robust and transparent legal framework (e.g. governing long-term environmental liability) and a strong policy framework providing sufficient and long-term incentives for CCS and CO₂ transportation networks.     

Precious Metals in Municipal Solid Waste Incineration Bottom Ash

Municipal solid waste incineration (MSWI) bottom ash contains economically significant levels of silver and gold. Bottom ashes from incinerators at Amsterdam and Ludwigshafen were sampled, processed, and analyzed to determine the composition, size, and mass distribution of the precious metals. In order to establish accurate statistics of the gold particles, a sample of heavy non-ferrous metals produced from 15 tons of wet processed Amsterdam ash was analyzed by a new technology called magnetic density separation (MDS). Amsterdam’s bottom ash contains approximately 10 ppm of silver and 0.4 ppm of gold, which was found in particulate form in all size fractions below 20 mm. The sample from Ludwigshafen was too small to give accurate values on the gold content, but the silver content was found to be identical to the value measured for the Amsterdam ash. Precious metal value in particles smaller than 2 mm seems to derive mainly from waste of electrical and electronic equipment (WEEE), whereas larger precious metal particles are from jewelry and constitute the major part of the economic value. Economical analysis shows that separation of precious metals from the ash may be viable with the presently high prices of non-ferrous metals. In order to recover the precious metals, bottom ash must first be classified into different size fractions. Then, the heavy non-ferrous (HNF) metals should be concentrated by physical separation (eddy current separation, density separation, etc.). Finally, MDS can separate gold from the other HNF metals (copper, zinc). Gold-enriched concentrates can be sold to the precious metal smelter and the copper-zinc fraction to a brass or copper smelter.     

Inter-species differences for polychlorinated biphenyls and polybrominated diphenyl ethers in marine top predators from the Southern North Sea: Part 2. Biomagnification in harbour seals and harbour porpoises

Harbour porpoises (Phocoena phocoena) and harbour seals (Phoca vitulina) were found to differ in the ability to metabolize polychlorinated biphenyls (PCBs) and polybrominated diphenyl ethers (PBDEs). Biomagnification factors (BMFs), calculated between both predators and their prey (sole - Solea solea and whiting - Merlangius merlangus), had a large range of variation (between 0.5 and 91 for PCBs and between 0.6 and 53 for PBDEs). For the higher chlorinated PCBs and the highest brominated PBDEs, the BMF values in adult males were significantly higher than in the juvenile individuals of both species. BMF values of hexa- to octa-PCBs were the highest, suggesting reduced ability to degrade these congeners. Harbour porpoises had higher BMFs for lower chlorinated PCBs and for all PBDEs compared to harbour seals. Other factors, which may influence biomagnification, such as the octanol-water partition coefficients and the trophic level position measured through stable isotope (δ¹⁵N) analysis, were found to be of lesser importance to predict biomagnification in the studied food chain.     

Altitude profiles of total chlorinated paraffins in humus and spruce needles from the Alps (MONARPOP)

Chlorinated paraffins (CPs) are toxic, bioaccumulative, persistent, and ubiquitously present in the environment. CPs were analyzed in humus and needle samples, which were taken within the Monitoring Network in the Alpine Region for Persistent and other Organic Pollutants (MONARPOP) at sampling sites of 7 different altitude profiles in the Alps. Gas chromatography combined with electron ionization tandem mass spectrometry (EI-MS/MS) was used for the determination of total CPs (sum of short, medium and long chain CPs). CPs were found in all samples; the concentrations varied between 7 and 199 ng g⁻¹ dry weight (dw) and within 26 and 460 ng g⁻¹ dw in humus and needle samples, respectively. A clear vertical tendency within the individual altitude profiles could not be ascertained. Within all altitude profiles, elevated concentrations were observed in humus samples taken between 700 and 900 m and between 1300 and 1500 m. In the needle samples no similar correlation could be observed due to higher variation of the data.     

Simultaneous measurements of formaldehyde and nitrous acid in dews and gas phase in the atmosphere of Santiago,Chile

The amounts of formaldehyde and nitrous acid (HONO) in gas phase and dews of Santiago de Chile were simultaneously measured. Formaldehyde concentrations values in the liquid phase (dews) correlate fairly well with those in the gaseous phase and are even higher than those expected from gas–dew equilibrium. On the other hand, nitrite concentrations in dews were considerably smaller (ca. 15 times) than those expected from the gas-phase concentrations. This under-saturation is attributed to diffusion limitations due to the relatively large HONO solubility. In agreement with this, under-saturation increases with the rate of dew formation and the pH of the collected waters, factors that should increase the rate of gas to liquid HONO transfer required to reach equilibrium.