Molecular Transport of Xylene Through Palm Pressed Fibre Filled Low Density Polyethylene: Role of Fibre Content,Alkali Treatment and Particle Size

We report in this paper the transport of an aromatic solvent, xylene through palm pressed fibre filled low density polyethylene composites studied at three different temperatures (40, 60, and 80 °C) by conventional weight-gain method. The diffusion parameters were investigated with special reference to the effect of fibre content, temperature and particle size. The effect of alkali treatment on solvent uptake was also analyzed. The transport coefficients of diffusion, permeation and sorption were determined to evaluate the influence of interface bonding on transport properties. The van’t Hoff relationship was used to determine the thermodynamic parameters and was found that the estimated free energies of sorption were all positive, indicating non-spontaneity of the solubility of PPF/LDPE composites. The first order kinetic rate constant and swelling parameters were also evaluated.     

Common operations failure modes in the process industries

The Abnormal Situation Management^® (ASM^®) Consortium (This research study was sponsored by the Abnormal Situation Management (ASM) Consortium. ASM^® and Abnormal Situation Management^® are registered trademarks of Honeywell International, Inc.) funded a study to investigate common failure modes and root causes associated with operations practices. The study team analyzed 20 public and 12 private incident reports using the TapRoot^® methodology to identify root causes. These root causes were mapped to operations practice failures. This paper describes the top ten operations failure modes identified in the analysis. Specific recommendations include how to analyze plant incident reports to better understand the sources of systemic failures and improve plant operating practices.     

Potential of acid activated clays in the clarification of menhaden stickwater

Abstract

The primary objective of this investigation was to determine the feasibility of using acid activated clays to clarify menhaden stickwater effluent. Experiments, such as physical and chemical properties determinations, effect of changes in pH and temperature and coagulation, and coagulation followed by clay treatment were also performed to study the separation of solids in stickwater.

Analysis of the stickwater showed that it contained 4.5% crude protein, 1.4% crude fat, 6.5% total solids, 1.13% ash and 93.1% water. At a wavelength of 575 um, the sample absorbed all the light and the percent transmittance was zero. When diluted 1:100 the percent transmittance was 0.39 at the same wavelength. Measured at 25°C the sample had a viscosity of 9.0 centipoises.

The results showed that the precipitation of fat increased with increasing temperatures, while the reverse was true for protein. A pH of 4.0 gave the maximum clarification at all temperatures employed. The viscosity decreased at pH values above and below the original pH of the sample.

Among the four different acid activated clays used in this study (trade names Supact‐150, Impact‐150, Impact‐12 and Impact‐1OORR), Impact‐150 was the most effective in protein and fat precipitation, and the degree of separation of these components increased by treating stickwater with a coagulant (aluminum sulfate) prior to treatment with acid activated clay.     

A database for integrated assessment of European agricultural systems

A major bottleneck for data-based policy making is that data sources are collected, managed, and distributed by different institutions, residing in different locations, resulting in conceptual and practical problems. The use of dispersed data for agricultural systems research requires the integration of data sources, which means to ensure consistency in data interpretations, units, spatial and temporal scales, to respect legal regulations of privacy, ownership and copyright, and to enable easy dissemination of data. This paper describes the SEAMLESS integrated database on European agricultural systems. It contains data on cropping patterns, production, farm structural data, soil and climate conditions, current agricultural management and policy information. To arrive at one integrated database, a shared ontology was developed according to a collaborative process, which facilitates interdisciplinary research. The paper details this process, which can be re-used in other research projects for integrating data sources.     

Fate of saline ions in a planted landfill site with leachate recirculation

Recirculation of leachate on a covered landfill site planted with willows or other highly evapotranspirative woody plants is an inexpensive option for leachate management. In our study, a closed landfill leachate recirculation system was established on a rehabilitated municipal solid waste landfill site with planted landfill cover. The main objective of the study was to evaluate the sustainability of the system with regard to high hydraulic loads of the landfill leachate on the landfill cover and high concentrations of saline ions, especially potassium (K⁺), sodium (Na⁺) and chloride (Cl^?), in leachate.The results of intensive monitoring, implemented during May 2004 and September 2007, including leachate, soil and plant samples, showed a high sustainability of the system regarding saline ions with the precipitation regime of the studied region. Saline ion concentrations in leachates varied between 132 and 2592 mg Cl^? L^?1, 69 and 1310 mg Na⁺ L^?1 and between 66 and 2156 mg K⁺ L^?1, with mean values of 1010, 632 and 686 mg L^?1, respectively. Soil salinity, measured as soil electrical conductivity (EC), remained between 0.17 and 0.38 mS cm^?1 at a depth between 0 and 90 cm. An average annual precipitation of 1000 mm provided sufficient leaching of saline ions, loaded by irrigation with landfill leachate, from the soil of the landfill cover and thus prevented possible salinity shocks to the planted willows.     

The need for a systems theory approach to road safety

In other hazardous complex socio-technical systems in society, e.g. nuclear power and aviation, systems-theoretical assumptions are considered a promising way to better understand and manage safety. In this paper, two fundamental approaches to road safety were assessed in the light of a systems theory approach. One approach, is based on a premise where individual road-users are solely responsible when crashes occur. In that case countermeasures are aimed at altering the behavior of the road-user in order to adapt him/her to the road transport system. The other approach, the so-called zero-tolerance position, or Vision Zero approach, to road safety is built around two axioms; the system must be adapted to the psychological and physical conditions and limitations of the human being and the responsibility for road safety must be shared between the road-users and the designers and professional operators of the system. It was found that the most important determinants of systems theory are basically not present in the road-user approach. However, even if the Vision Zero approach clearly takes step towards systems theory, it does leave room for articulating even more features of systems theory.     

Sublethal impact of paraquat on the life span and parasitic behavior of Diaeretiella rapae M’Intosh

This study focuses on assessing the impact of sublethal doses of paraquat on the survival, the emergence, the life span and the parasitic behavior of Diaeretiella rapae M’Intosh (Hymenoptera: Braconidae). The impact of sublethal doses was measured at room temperature using different densities of the cabbage aphid Brevicoryne brassicae. The results reveal that the field dose of paraquat caused 100% mortality in D. rapae. The percentage emergence of D. rapae decreased from 80.5% in the control group to 71.5% when treated with the lowest concentration of paraquat. Similarly, the life span of parasitoids that emerged from the mummy treated with paraquat also decreased significantly. Oviposition capability and ovipositor thrusting frequency of D. rapae also treated with sublethal dose paraquat decreased significantly along with a shortened patch residence time in the foraging area.     

How Should Support for Climate-Friendly Technologies Be Designed?

Stabilizing global greenhouse gas concentrations at levels to avoid significant climate risks will require massive “decarbonization” of all the major economies over the next few decades, in addition to the reduced emissions from other GHGs and carbon sequestration. Achieving the necessary scale of emissions reductions will require a multifaceted policy effort to support a broad array of technological and behavioral changes. Change on this scale will require sound, well-thought-out strategies. In this article, we outline some core principles, drawn from recent social science research, for guiding the design of clean technology policies, with a focus on energy. The market should be encouraged to make good choices: pricing carbon emissions and other environmental damage, removing distorting subsidies and barriers to competition, and supporting RD&D broadly. More specific policies are required to address particular market failures and barriers. For those technologies identified as being particularly desirable, some narrower RD&D policies are available.