Modeling organic carbon dynamics and cadmium fate in long-term sludge-amended soil

A model is described that may help to resolve uncertainty and controversy over the long-term consequences of sludge applications to arable land, especially with regard to the effects of sludge adsorption characteristics on trace metal solubility and bioavailability (e.g., the sludge "time bomb" or sludge "protection" hypotheses). Mass balances of organic and inorganic material derived from sludge and crop residues are simulated. Each pool has a potentially different adsorption affinity for trace metals, and this leads to changes in the adsorption capacity of sludge-amended soil that influence leaching and crop uptake. Model simulations were compared with measured changes in organic carbon and ethylenediaminetetraacetic acid (EDTA)-extractable cadmium contents in a clay loam soil following 41 years of sludge applications. The model adequately reproduced the data, although discrepancies in the vertical distribution of Cd were attributed to the effects of macropore transport and root-uptake driven recirculation. A Monte Carlo sensitivity analysis demonstrated that the most important parameters affecting leaching and crop uptake were the Cd loading and parameters controlling adsorption, especially the partition coefficient for sludge-derived inorganic material and the exponent regulating the effect of pH on sorption. Scenario simulations show that no general conclusions can be drawn with respect to the validity of the sludge "time bomb" and sludge "protection" hypotheses. Either may occur, or neither, depending on three key system parameters: the ratio of sludge adsorption capacity to the initial adsorption capacity of the soil, the proportion of the sludge adsorption capacity contributed by the inorganic fraction, and the sludge Cd loading.     

Verbleib von spurenschadstoffen bei der methylesterherstellung aus altspeisefett im technikumsmaßstab

Aims and Scope

In Germany, 120,000 tons per year of waste edible fats are collected from the catering and the food industry Until recently, these fats have widely been used as a nutritional additive for poultry and other animals fodder. Due to the BSE crisis and some affairs based on dioxins in feeding stuff, waste fats are now barely used as fodder. Currently, these fats substitute fresh vegetable oils in the chemical industry and are used as raw material for the production of biodiesel. Therefore, alternative fields of application are required. In this context, the Deutsche Bundesstiftung Umwelt (DBU) is sponsoring a joint research project which deals with the production and testing of cooling lubricants based on monoesters made from waste edible fats.

Methods

In a first step, characteristics and quality of wasteedible fats of different origins were chemically analysed and monitored. The investigations covered the following fat specific parameters: total contamination, sulphate ash, water content, peroxide number, iodine value, kinematical viscosity, neutralisation number (free fatty acids) and fatty acid spectra. In the next step, a process development/optimisation was carried out for the production of methylesters based on the raw material waste fat, leading to the construction of a pilot plant. To investigate the fate of trace pollutants during the production process of waste-fat methylester, samples were systematically contaminated with polycyclic aromatic hydrocarbons, polychlorinated biphenyls, polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans and the elements Al, Cd, Cr, Cu, Ni, P, Pb, Sn, and Zn. These contaminated fat samples were transesterified in laboratory scale. The primary and by-products were analysed subsequently.

Results

Valuable hints on the design of the technical process of fatty adid methylester production based on waste edible fats were gained by regarding the fat specific parameters. For example, filtration and dewatering of the waste fats proved necessary. The saturated fatty acids, most wanted for the production of cooling lubricants due to their high oxidation stability, were present in the range of 11,3% to 31,6%. Due to the low content of free fatty acids, a base catalysed process occurred more suitable for the transesterification of the waste edible fats. Trace analytical investigations concerning inorganic and organic pollutants proved a low basic contamination of the waste edible fats. Experiments with systematic contamination of the fats indicated an accumulation of the heavy metals in the glycerol phase during the transesterification process, whereas the organic pollutants were detected in the methylester fraction by amounts of 80% to 95%.

Outlook

In a next step, the further processing of the methylesters to monoesters with alcohols of the chain length C2 to C8 will be presented. Associated results of chemical-analytical investigations on the process and the application of the cooling lubricants will also be given.     

Global-scale vs. regional-scale scenario assumptions: implications for estimating future water withdrawals in the Elbe River basin

In this paper, we explore how scenarios of future water withdrawals in a river basin are influenced by scale-dependent quantifications of the driving forces for two global-scale storylines. Either global-scale information or region-specific information is used to do the quantifications. In addition, we analyze the impact of including or not some restricted regional-scale information in the employed water use model. To develop scenarios of water withdrawals in the German part of the Elbe River basin, we applied the modules for domestic, thermoelectric power and manufacturing water use of the global water model WaterGAP, using scale-dependent driving forces scenarios and other scale-dependent model input. In the global-scale quantitative interpretations of the storylines of the IPCC SRES scenarios A1 and B2, all major driving forces of water withdrawals in the basin—population, thermoelectric power production and industrial gross domestic product—show vigorous increases between 2000 and 2025, while from the regional perspective, smaller increases but mostly decreases appear to be plausible. These discrepancies are partly due to the fact that for the global-scale interpretations only the historic developments until 1990 were taken into account, and not until 2000 as in the regional case. The resulting scenarios of sectoral water withdrawals in 2025 differ strongly between the two scale-dependent interpretations of the storylines, with the global one leading to much higher absolute water withdrawals and much lower withdrawal decreases between 2000 and 2025. Therefore, for regional assessments of water withdrawals, we recommend to embed the scenario analysis in global-scale storylines by performing regional-scale quantifications of the global qualitative driving forces scenarios, based on a limited amount of region-specific information.     

Determining the agricultural ammonia immission using bark bio-monitoring: comparison with passive sampler measurements

Bark samples of spruce, pine and oak trees were collected at two sites in southern Bavaria which are characterized by high agricultural ammonia emissions. The samples were taken using a recently developed bark sampling device which removes a defined layer of the bark. The bark was then analysed for ammonium concentration in order to reflect the environmental ammonia immission. The measured bark concentrations decreased with rising distance between the sample trees and the ammonia source. This applied (i) to measurements inside a closed forest stand ranging from forest edge with high immission to forest interior with much lower immission, and (ii) to the open field where single-standing trees were sampled. Comparing the ammonium concentrations among the three different tree species revealed significant correlations. Thus, it could be shown that old spruce trees are as usable for bark bio-monitoring as the traditionally used pine and oak trees. The ammonium concentrations of the bark were significantly correlated to measurements taken by ammonia passive samplers at the same locations. These results indicate that bark samples may be used for a standardised monitoring of airborne ammonia load. A major advantage of the technique is the determination of the long-term accumulative ammonia load using a single measurement.     

GVO-Pollenmonitoring zum Bt-Maisanbau im Bereich des NSG/FFH-Schutzgebietes Ruhlsdorfer Bruch

Aim and Background Precautionary regulations for the production of genetically modified crops (Gentechnik-Pflanzenerzeugungsverordnung, GenTPflEV 2008) provide isolation distances for the cultivation of genetically modified maize – Bt-maize – in the vicinity of conventional maize cultivation (150?m) as well as of organic maize cultivation (300?m). Nature reserves are not included. The aim of this study was to investigate whether maize pollen of surrounding fields were dispersed in the Flora-Fauna-Habitat (FFH) Ruhlsdorfer Bruch. In the vicinity of the nature reserve Bt-maize species MON 810 as well as conventional maize was grown. The survey should provide appropriate isolation distances for the cultivation of Bt-maize with regard to sustainable protection of non-target-organisms (NTO) in the Ruhlsdorfer Bruch. Materials and Methods The collection of maize pollen in the Ruhlsdorfer Bruch was carried out at three sampling sites in the FFH or rather in the immediate vicinity in July and August 2007 by means of twelve technical and three biological pollen samplers. The technical samplers Sigma-2/PMF enable point sampling. They are primarily influenced by wind and topography and provide information about the effective entry, the maize pollen flow and the maize pollen deposition at the location of the sampler. Honey bees roam over longer distances and are hence planar collectors. Thus, they also provide information about the plants blooming in a distinct area. Furthermore, the biological preferences during the collection are captured, whereas a technical sampler does not perform a species dependent selection. Hence, both the technical and the biological samplers complement one another in their scope of application. The pollen samples were identified microscopically, enumerated quantitatively, and the pollen-DNA was analysed by means of the PCR-method. Results All monitoring sites at the Ruhlsdorfer Bruch revealed maize pollen entries. The pollen deposition reached values of 1.75 million maize pollen/m² in the close-up range. The monitoring sites located 120?m within the protected area still featured 99,000 maize pollen/m². As shown by the statistical analysis, at a distance of 1,000?m still 28,000 maize pollen/m² must be expected. The results of the microscopic pollen analysis of the pollen pellets proved that the bees collect maize pollen at all three sites. Although maize pollen is not the main food source the high collection efficiency of the bees resulted in large amounts of introduced pollen. The biomolecular proof of pollen-DNA in the field samples was corroborated by analogue results for both the technical and biological pollen sampling by two independent laboratories. The results of these quality controlled analyses gave unambiguous evidence that under the cultivation conditions in 2007 an entry of Bt-maize pollen into the FFH Ruhlsdorfer Bruch was existent. Discussion The maize pollen deposition at the Ruhlsdorfer Bruch corresponds with additional supra-regional investigations which were conducted over several years with the same method. However, the pollen entries into the Ruhlsdorfer Bruch are above-average. Possible reasons are the size of the maize fields (>?10?ha), the geographical collocation between maize fields and protected area (lee location, through-shaped, thermal currents) as well as weather conditions and maize bloom during the sampling period July and August 2007. A distance of 1,000?m or more is necessary to avoid maize pollen deposition of more than 100,000/m² with a probability of 90?%. Conclusions The results of this investigation prove an entry of Bt-maize pollen into the FFH under the cultivation and weather conditions in summer 2007. According to the results of this and related studies and considering precautionary principle and the effect terms defined in the Federal Immission Protection Law, it becomes clear that reasonable isolation distances between Bt-maize fields and protected areas have to be introduced in order to minimise the entry of GM-maize pollen and to prevent adverse effects on protected NTOs. Recommendations Due to the fact that no toxicological investigations are available for the butterflies occurring in the FFH, highest protection standards should be implemented to avoid Bt-maize pollen entries into the Ruhlsdorfer Bruch. That implies that highest possible isolation distances for Bt-maize cultivation have to be considered, but at least a distance of 1,000?m is recommended. Following this a maize pollen deposition of more than 100,000 maize pollen/m² should be pevented with a certainty of 90?% as well as an exceeding exposure of foraging insects. Outlook By means of the pollen monitoring it becomes possible to survey empirically defined limits of pollen exposure. This should be performed in the nature reserve area at sites of expected maximum exposure, e.?g. at the boundaries of the FFH towards the maize fields and at exposed sites.     

Labile organic carbon regulates phosphorus release from eroded soil transported into anaerobic coastal systems

Coastal eutrophication is expected to increase due to expanding and intensifying agriculture which causes a large amount of soil-associated P to be transported into aquatic systems. We performed anaerobic long-term incubations on field soil to mimic the conditions that eroded soil encounters in brackish sediments. The release of P from soil increased with the amount of labile organic C (acetate) addition and decreased with the soil/solution ratio. We deduce that in less-productive brackish systems, microbial Fe reduction allows for the maintenance of the coupled cycling of Fe and P and restricts the amount of P entering the oxic water. In more eutrophic systems, the formation of Fe sulfides as a result of SO₄ reduction inactivates Fe, and leads to a higher release of P, thus generating an adverse feedback effect. The dependence of the fate of soil-bound Fe and P on the trophic status of the receiving water should be recognized in eutrophication management.     

Mechanical Equipment Injuries in Small Manufacturing Businesses. Knowledge,Behavioral, and Management Issues

This paper presents findings from an extensive study intofactors that impact upon the high rate of injuries due to mechanical equipment, especially in small manufacturing firms. Issues relating to knowledge of health and safety issues and to management practices have been shown to be extremely important with regards to safety in smaii businesses. Knowledge and awareness of hazards were found to be relatively low and few respondents, especially managers, had received adequate safety training. Managers did not regard the identification and control of risks as a priority. Workplaces generally lacked effective safety management procedures such as safety rules and regulations, procedures for recording and learning from accidents, and clearly defined responsibilities for safety. Some issues requiring further investigation, and some recommendations for improving safety in small businesses, are presented.     

Small Business Owners’ Knowledge of Their Occupational Health and Safety (OHS) Legislative Responsibilities

This article reports the results of a study investigating the nature and extent of small manufacturing business owners’ knowledge of Occupational Health and Safety (OHS) issues. Interviews were conducted with 33 owners of small manufacturing businesses in Sydney, Australia. Results showed that whereas the majority of owners had basic awareness of the existence of OHS legislation, they were often unaware about the extent of their legal OHS responsibilities. Owners were found to have minimal OHS training and practical OHS expertise. Lack of appropriate industry specific OHS information was found to be a major factor that inhibited the owners’ ability to deal with OHS issues effectively.