Toxicological characterization of the landfill leachate prior/after chemical and electrochemical treatment: A study on human and plant cells

In this research, toxicological safety of two newly developed methods for the treatment of landfill leachate from the Piškornica (Croatia) sanitary landfill was investigated. Chemical treatment procedure combined chemical precipitation with CaO followed by coagulation with ferric chloride and final adsorption by clinoptilolite. Electrochemical treatment approach included pretreatment with ozone followed by electrooxidation/electrocoagulation and final polishing by microwave irradiation. Cell viability of untreated/treated landfill leachate was examined using fluorescence microscopy. Cytotoxic effect of the original leachate was obtained for both exposure periods (4 and 24 h) while treated samples showed no cytotoxic effect even after prolonged exposure time. The potential DNA damage of the untreated/treated landfill leachate was evaluated by the comet assay and cytokinesis-block micronucleus (CBMN) assay using either human or plant cells. The original leachate exhibited significantly higher comet assay parameters compared to negative control after 24 h exposure. On the contrary, there was no significant difference between negative control and chemically/electrochemically treated leachate for any of the parameters tested. There was also no significant increase in either CBMN assay parameter compared to the negative control following the exposure of the lymphocytes to the chemically or electrochemically treated landfill leachate for both exposure periods while the original sample showed significantly higher number of micronuclei, nucleoplasmic bridges and nuclear buds for both exposure times. Results suggest that both methods are suitable for the treatment of such complex waste effluent due to high removal efficiency of all measured parameters and toxicological safety of the treated effluent.     

Distribution of Se and its species in Myriophyllum spicatum and Ceratophyllum demersum growing in water containing Se (VI)

The uptake of Se (VI) by two aquatic plants, Myriophyllum spicatum L. and Ceratophyllum demersum L., and its effects on their physiological characteristics have been studied. Plants were cultivated outdoors under semi-controlled conditions and in two concentrations of Na selenate solution (20 μg Se L⁻¹ and 10 mg Se L⁻¹). The higher dose of Se reduced the photochemical efficiency of PSII in both species, while the lower dose had no effect on PSII. Addition of Se had no effect on the amounts of chlorophyll a and b. The concentration of Se in plants grown in 10 mg Se L⁻¹, averaged 212 ± 12 μg Se g⁻¹ DM in M. spicatum (grown from 8-13 d), and 492 ± 85 μg Se g⁻¹ DM in C. demersum (grown for 31 d). Both species could take up a large amount of Se. The amount of soluble Se compounds in enzyme extracts ranged from 16% to 26% in control, and in high Se solution from 48% to 36% in M. spicatum and C. demersum, respectively. Se-species were determined using HPLC-ICP-MS. The main soluble species in both plants was selenate (∼37%), while SeMet and SeMeSeCys were detected at trace levels.     

Cross-border radon index map 1:100?000 Lausitz - Jizera - Karkonosze - Region (northern part of the Bohemian Massif)

The first cross-border map describing the radon (Rn) risk from bedrock was assembled in the northern part of the Bohemian Massif at a scale 1:100?000. The map covers the area of Lausitz (Germany), Karkonosze (Czech Republic and Poland) and Jizera (Czech Republic). The map is based on 818 measurements of soil gas Rn in rock types of Precambrian to Mesozoic age with variable geology. Geographic information system (GIS) processing enabled a good coincidence of soil gas Rn concentrations between data from all three countries in lithologically adjacent rock types as well as the direct correlation to georeferenced indoor Rn values, which was tested using the Czech indoor Rn data. The method of data processing can contribute to assembling the European Geogenic Radon Map.     

Can coral reefs be monitored from space?

The dramatic bleaching events on the coral reefs recently have enhanced the need for environmental monitoring. Remote sensing is an important constituent for monitoring of reefs, and an invaluable complement to field observations. This paper discusses the possibilities and limitations of present high resolution satellites for mapping and monitoring coral reefs. The sensors with the best spatial and radiometric resolution available today, e.g. IKONOS, can be useful for mapping and monitoring of reefs, but they are too costly for global surveys. However, our coral bleaching studies indicate that massive bleaching could be detected even from satellites with lower resolution, like Landsat, SPOT, and IRS. They could also be useful for coarser, from a spatial and thematic point of view, global mapping and updating purposes. A more detailed monitoring requires both better spatial resolution and spectral resolution than today's sensors. In the future, it is necessary to construct a more reef specific sensor with a few specially selected narrow bands and a good spatial, radiometric and temporal resolution.     

Phyto/rhizoremediation studies using long-term PCB-contaminated soil

Purpose  

Polychlorinated biphenyls (PCBs) represent a large group of recalcitrant environmental pollutants, differing in the number of chlorine atoms bound to biphenyl ring. Due to their excellent technological properties, PCBs were used as heat-transfer media, for filling transformers and condensers, as paint additives, etc. With increasing knowledge of their toxicity, transfer to food chains and accumulation in living organisms, their production ended in most countries in the 1970s and in 1984 in the former Czechoslovakia. But even a quarter of century after the PCB production ceased, from contaminated areas, the volatile PCBs evaporate and contaminate much larger areas even at very distant parts of the world. For this reason, PCBs still represent a global problem. The main method of PCB removal from contaminated environment is at present the expensive incineration at high temperatures. With the aim of finding effective alternative approaches, we are studying biological methods for PCB removal from the environment. In this paper, we summarise 10 years of studies using long-term PCB-contaminated soil from a dumpsite in South Bohemia, targeted for the use of plants (phytoremediation) and their cooperation with microorganisms in the root zone (rhizoremediation).     

Cytostatische Nicht-Platinmetall-Komplexe: neue Perspektiven für die Krebsbehandlung?

Non-platinum-group metal antitumor agents are represented by inorganic and organometallic compounds which contain either main-group metals such as gallium, germanium, and tin, or transition metals such as titanium, vanadium, iron, copper, and gold. Their antiproliferative properties have been detected during the past years, the spectrum of antitumor activity not being identical with that of cytostatic platinum complexes. In the case of germanium complexes, the antitumor activity is obviously not based on direct cytotoxic effects, but on host-mediated immunopotentiating mechanisms. The toxic properties of most non-platinum-group metal antitumor agents differ fundamentally from those of platinum compounds. Thus, non-platinum-group metal antitumor agents may open new perspectives for the clinical therapy of human malignancies.     

Quantification of polychlorinated biphenyls in plastic granulates from the recycling of cables - Reference materials and interlaboratory comparison

A procedure for the quantification of the PCB marker congeners 28, 52, 101, 138, 153, 180 in plastic waste form the recycling of cables in the range of content between 0.1 mgkg(-1) and 20 mgkg(-1) was validated. Representative reference materials for laboratory analyses were produced using granulates from different recycling processes. The method development included aspects of grinding, sieving, homogenising as well as the comparison of extraction methods and chromatographic conditions. The validated procedure foresees grinding of the technical sample to an upper particle size limit of 0.50mm followed by extraction with an unpolar solvent such as n-hexane and gas chromatographic determination. LOD and LOQ for individual congeners ranged between 0.01 mgkg(-1) and 0.08 mgkg(-1). Electron capture detection (ECD) and mass selective detection (MS) were equivalent if chromatographic conditions were appropriately selected. The application of MS was advantageous in presence of significant amounts of interfering components which have been found in some cables. Three reference materials containing the marker congeners in the range of 0.1 mgkg(-1)-5 mgkg(-1) were submitted to a final validation intercomparison with 23 selected field laboratories using the developed method. Relative reproducibility standard deviations varied between 15% and 33%.     

Passive air sampler as a tool for long-term air pollution monitoring: Part 1. Performance assessment for seasonal and spatial variations

The potential of passive air sampling devices (polyurethane foam disks) to assess the influence of local sources on the quality of the surrounding environment was investigated. DEZA Valasske Mezirici, a coal tar and mixed tar oils processing plant, and Spolana Neratovice, a chemical factory with the history of high production of organochlorinated pesticides (OCPs), were selected as the point sources of PAHs, and OCPs, respectively. Levels of PCBs, OCPs and PAHs were determined for all sampling sites and sampling periods. The study brought useful data about the air concentrations of POPs in the investigated regions. More important, it provided information on the transport and fate of POPs in the vicinity of local sources of contamination useful for the estimation of their influence. Very good capability of passive samplers to reflect temporal and spatial fluctuation in concentrations of persistent organic pollutants in the ambient air was confirmed which makes them applicable for monitoring on the local scale.