A numerical study of summer ozone concentration over the Kanto area of Japan using the MM5/CMAQ model

We assessed the ability of the MM5/CMAQ model to predict ozone (O3) air quality over the Kanto area and to investigate the factors that a ect simulation of O3. We find that the coupled MM5/CMAQ model is a useful tool for the analysis of urban environmental problems. The simulation results were compared with observational data and were found to accurately replicate most of the important observed characteristics. The initial and boundary conditions were found to have a significant e ect on simulated O3 concentrations. The results show that on hot and dry days with high O3 concentration, the CMAQ model provides a poor simulation of O3 maxima when using initial and boundary conditions derived from the CMAQ default data. The simulation of peak O3 concentrations is improved with the JCAP initial and boundary conditions. On mild days, the default CMAQ initial and boundary conditions provide a more realistic simulation. Meteorological conditions also have a strong impact on the simulated distribution and accumulation of O3 concentrations in this area. Low O3 concentrations are simulated during mild weather conditions, and high concentrations are predicted during hot and dry weather. By investigating the e ects of di erent meteorological conditions on each model process, we find that advection and di usion di er the most between the two meteorological regimes. Thus, di erences in the winds that govern the transport of O3 and its precursors are likely the most important meteorological drivers of ozone concentration over the central Kanto area.     

Emission of dioxins/furans and other U-POPs from test burns of non-POP pesticides in a hazardous waste incinerator

This paper presents the results of test burns for obsolete pesticides (OPs) of the permethrin group in a high temperature incinerator (HTI) in Southeast Asia. Three test burn runs were conducted, a baseline run when no OP was fed to the incinerator, and two test runs with different mixtures of OP compounds (formula 1 and 2, refer to Table 1 for detail) containing chlorine in the feeding wastes. The unintentional formed persistent organic pollutants (U-POPs) including 17 dioxins/furans, 12 dioxin-like PCBs and 12 chlorobenzenes (CBs) were monitored in all input materials and all discharges (flue gas, scrubbing liquid and solid residues). The results show relatively high levels of the U-POPs in the flue gas emission with total dioxins/furans of 4.4, 3.4, and 8.4 ng I-TEQ/m³ in the baseline, test run 1 and test run 2, respectively, which are above international acceptable emission levels. The PCB levels in flue gas were, respectively, 0.01, 0.3 and 0.4 ng I-TEQ/m³. The baseline thus had similar U-POPs levels with the OP test runs.In stack emission, approximately 90% of the U-POPs and 100% of CBs were present in gas phase. The emission factors, mass of pollutants per metric ton (tonne) of input waste, of U-POPs associated with fly ash (from bag house) were the highest, followed by flue gas and bottom ash while those associated with scrubbing liquid were relatively low. Among the waste input material only the black toner power contained U-POPs, but at low levels. The profiles of the dioxins/furans and PCBs in the toner waste were significantly different from that in the discharges. Despite the overall good destruction and removal efficiency of permethrin (better than 90%) the high emission of U-POPs and CBs from the test burn is of another more serious concern. To our best knowledge the findings of this study are the first of this kind for the Southeast Asia. The findings emphasize that if not properly conducted a standard destruction technology of a non-POP chemical can lead to a release of a range of more dangerous U-POPs into the environment.     

239+240Pu, 90Sr and 137Cs inventories in surface soils of Vietnam

Fallout 239+240Pu, 238Pu, 90Sr and 137Cs inventories in surface soils were measured for 20 locations in northern Vietnam yielding the mean values (+/- standard error) of 26.5+/-3.8 Bq m(-2) for 239+240Pu, 1048+/-143 Bq m(-2) for 137Cs and 212+/-28 Bq m(-2) for 90Sr. The concentrations of 137Cs and plutonium isotopes strongly correlate with each other resulting in a stable 239+240Pu/137Cs inventory ratio of 0.025+/-0.002. Among soil parameters, organic matter and fulvic acids strongly correlate with caesium and plutonium isotopes, especially in the 0-10 cm layer. 137Cs and 239+240Pu are distributed rather similarly over the 0-10 cm and 10-20 cm layers. At locations with high contents of sand (82-93%) along the South China Sea coast, the downward percolation by rainwater results in a higher accumulation of 239+240Pu and 137Cs in the 10-20 cm layer. The mean 137Cs/ 90Sr inventory ratio is 9.3+/-2.2, and the correlation is weak between these isotopes.     

Exposure Programme on Atmospheric Corrosion Effects of Acidifying Pollutants in Tropical and Subtropical Climates

Many national exposure programmes have been performed in tropical and subtropical climates during the last 50 years. However, ambitious programmes involving more than a few countries are scarce. In this paper a recently formed network of test sites is described involving 12 test sites in Asia (India, Vietnam, Thailand, Malaysia and China including Hong Kong) and four test sites in Africa (South Africa, Zambia and Zimbabwe). This effort is part of the 2001–2004 Swedish International Development Agency (SIDA) funded Programme on Regional Air Pollution in Developing Countries (RAPIDC). Corrosion attack after one (2002–2003) year of exposure (carbon steel, zinc, copper, limestone and paint coated steel) are presented together with environmental data (SO₂, NO₂, HNO₃, O₃, particles, amount and pH of precipitation, temperature and relative humidity) for all the test sites. The obtained corrosion values are substantially higher than expected for limestone, higher than expected for carbon steel and lower than expected for zinc compared to values calculated using the best available dose–response functions.     

A COMPARISON OF STATISTICAL TESTS ON THE EXTREME-VALUE TYPE-1 DISTRIBUTION1

ABSTRACT: The effects of the selections of plotting position formulae and class division schemes on goodness of fit tests are investigated for the extreme-value type-1 distribution using annual flood and annual maximum daily rainfall data. It was found that the plotting position formulae have a minor influence on the tests which involve their use, while the class division schemes may have a pronounced effect on the X²-test. The study also recommended the maximum likelihood method for fitting purposes and a new test which is independent of the afore-mentioned selections for judging the goodness of fit.     

COMPARISON OF TWO AUTOREGRESSIVE MODELS FOR MONTHLY STREAM FLOW GENERATION1

ABSTRACT: Two autoregressive models for monthly stream flow generation are compared based on the reproduction of the historical record in terms of several important statistics such as the mean, standard deviation, skewness coefficient, correlation coefficient, and the reservoir storage components. In the comparison, both theoretical considerations and practical applications are employed to evaluate the performance of each model.     

Normality of Hydrological Data1

ABSTRACT: Assessment of normality of hydrological data has been based upon subjective judgments. This paper aims to provide an objective method for such an assessment by introducing three computationally simple statistical tests. Application to some stream flow data indicates that (1) for annual values, at least one of the three sequences- original, square root, and logarithmic - can be considered to be normally distributed; and (2) most monthly stream flows are skew and neither the square root nor the logarithmic transformation is able to render their sequences in all the 12 months normal.     

Potential application of high pressure carbon dioxide in treated wastewater and water disinfection: Recent overview and further trends

Recently emerging disadvantages in conventional disinfection have heightened the need for finding a new solution. Developments in the use of high pressure carbon dioxide for food preservation and sterilization have led to a renewed interest in its applicability in wastewater treatment and water disinfection. Pressurized CO₂ is one of the most investigated methods of antibacterial treatment and has been used extensively for decades to inhibit pathogens in dried food and liquid products. This study reviews the literature concerning the utility of CO₂ as a disinfecting agent, and the pathogen inactivation mechanism of CO₂ treatment is evaluated based on all available research. In this paper, it will be argued that the successful application and high effectiveness of CO₂ treatment in liquid foods open a potential opportunity for its use in wastewater treatment and water disinfection. The findings from models with different operating conditions (pressure, temperature, microorganism, water content, media …) suggest that most microorganisms are successfully inhibited under CO₂ treatment. It will also be shown that the bacterial deaths under CO₂ treatment can be explained by many different mechanisms. Moreover, the findings in this study can help to address the recently emerging problems in water disinfection, such as disinfection by-products (resulting from chlorination or ozone treatment).     

A review of polybrominated diphenyl ethers and alternative brominated flame retardants in wildlife from China: Levels, trends, and bioaccumulation characteristics

Accelerated industrialization and urbanization, and unregulated disposal of waste of electric and electronic equipment (e-waste) in China have caused environmental pollution of brominated flame retardants (BFRs). This review summarized the levels, trends, and bioaccumulation characteristics of polybrominated diphenyl ethers (PBDEs) and other potential alternative BFRs including hexabromocyclododecanes (HBCDs), 1,2-bis(2,4,6-dibromophenoxy) ethane (BTBPE) and decabromodiphenylethane (DBDPE) in wildlife from China. PBDE levels in wildlife from China were generally higher than those from other parts in Asia, and were comparable to those from Europe but were lower than those from North America. However, wildlife from the e-waste recycling sites in South China and East China contained much higher PBDEs compared to other reports around the world, suggesting the heavy contamination of PBDEs in these regions. The alternative BFRs were also detected in wildlife, revealing that the animals are exposed to these chemicals, in addition to PBDEs. Temporal trends indicated by levels in marine mammals from South China suggested that PBDE levels increased from the beginning of 1990s to 2000s, but decreased from the middle of 2000s, followed by relatively steady levels. In contrast, HBCDs were found to be continuously increasing from 1997 to 2007, indicating the increasing usage of HBCDs in China in recent years. Compared to PBDE profiles found in other parts, aquatic species and birds from China contained relatively higher contributions of BDE-28 and 209, respectively, suggesting the possible different usage pattern of PBDEs. Future works including keeping monitoring at a reasonable scale and frequency to make sure levels near urban centers indicative of population do not increase are needed. Additionally, focus effort on e-waste recycling regions to look for impacts and to determine if regulation/controls are resulting in lower environmental contamination, and incorporation of sentinel species in monitoring efforts are recommended.