Traditional management and conservation of shea trees (<Emphasis Type="Italic">Vitellaria paradoxa</Emphasis> subspecies <Emphasis Type="Italic">nilotica</Emphasis>) in Uganda

Traditional practices are universally recognised as a basis for conservation of biodiversity. However, such practices are often not included in natural resource conservation policies. This study assessed local conservation practices of shea trees (Vitellaria paradoxa) within different farming systems in Uganda and developed conservation guidelines for the species. The assessment involved 300 respondents, 15 focus groups and 41 key informants. Content analysis was used to identify the most important management and conservation practices. Local uses were categorised on the basis of shea tree products while differences in conservation practices were analysed using the Friedman test. The results show that eight shea tree products are used for 36 different purposes. Respondents’ age significantly influenced their knowledge about the shea tree. Traditional conservation practices include on-farm retention during cultivation and the use of folklore (mainly taboos), customs and rituals. Traditional management practices include weeding, bush burning, pollarding and pruning. Based on the current management and traditional conservation practices, a framework for the conservation of shea trees is proposed for integration into conservation policy decisions.     

UV-ozonation of eleven major pesticides as a waste disposal pretreatment

The time required to destroy 3 concentrations (10, 100, and 1000 ppm) of 9 formulated herbicides (alachlor, atrazine, bentazon, butylate, cyanazine, 2, 4-D, metolachlor, metribuzin, and trifluralin) and two formulated insecticides (carbofuran and malathion) by ultraviolet (UV)-ozonation (O₃) was measured in a 66 UV lamp unit. The time required for 90% destruction was dependent on the concentration and increased as the concentration of pesticide increased. UV irradiation in the presence of ozone rapidly photooxidized all pesticides at 10 and 100 ppm and averaged 22 and 61 min, respectively. Longer times were required for pesticides at 1000 ppm.     

Measured summertime concentrations of particulate components,Hg0, and speciated polycyclic aromatic hydrocarbons at rural sites in New York State

Daily PM2.5 samples, Hg0 and speciated polycyclic aromatic hydrocarbon (PAH) were simultaneously collected at Potsdam and Stockton site in NY during the summers of 2000 and 2001. Samples for determination of the mass concentration and chemical composition of the PM2.5 were obtained with a speciation network PM2.5 sampler. Chemical composition including trace elemental composition, water-soluble ions, and elemental carbon were analyzed. Elemental mercury and PAHs were sampled separately. Daily PM2.5 concentrations ranged from 0.47 to 53.7 microg m(-3) at the Potsdam site, and from 0.82 to 47.23 microg m(-3) at the Stockton site with large daily differences between the two sites. Potsdam consistently had lower mass values than Stockton. The greatest contributors to the PM2.5 mass (generally >0.1 microg/m(3)) were sulfate, nitrate, ammonium, and BC at both sites. Seventeen PAHs were identified at each site in 2000 and the average total concentrations were 3.2 ng/m(3) and 2.9 ng/m(3) at the Potsdam and Stockton sites, respectively. The mean vapor phase mercury concentration at the Potsdam site (2.4 +/-1.2 ng m(-3), n=93) was higher than that at the Stockton site (1.2 +/- 1.0 ng m(-3), n=60) in 2000, whereas in 2001, the average concentrations were 1.1 ng m(-3) and 1.6 ng m(-3) at the Potsdam and Stockton sites, respectively. In general, vapor phase mercury concentrations increased with increasing ambient temperature at the Stockton site in 2000. These differences in values between 2000 and 2001 can be largely explained by distinct differences in the meteorological regimes that dominated in the different years.     

Nitrifying community analysis in a single submerged attached-growth bioreactor for treatment of high-ammonia waste stream.

This study investigated the nitrifying community structure in a single-stage submerged attached-growth bioreactor (SAGB) that successfully achieved stable nitrogen removal over nitrite of a high-strength ammonia wastewater. The reactor was operated with intermittent aeration and external carbon addition (methanol). With influent ammonia and total Kjeldahl nitrogen ranging from 537 to 968 mg/L and 643 to 1510 mg/L, respectively, 85% nitrogen removal was obtained, and effluent was dominated by nitrite (NO2-/NOx > 0.95). Nitrifying community analysis using fluorescence in situ hybridization (FISH), with a hierarchical set of probes targeting known ammonia-oxidizing bacteria (AOB) within beta-proteobacteria, showed that the AOB community of the biofilter consists almost entirely of members of the Nitrosomonas europaea/eutropha and the Nitrosococcus mobilis lineages. Image analysis of FISH pictures was used to quantify the identified AOB, and it was estimated that Nitrosomonas europaea/eutropha-like AOB accounted for 4.3% of the total volume of the biofilm, while Nitrosococcus mobilis-like AOB made up 1.2%; these numbers summed up to a total AOB fraction of 5.5% of the total volume on the biofilm. Nitrite-oxidizing bacteria (NOB) were not detectable in the biofilm samples with probes for either Nitrospira sp. or Nitrobacter sp., which indicated that NOB were either absent from the biofilters or present in numbers below the detection limit of FISH (< 0.1% of the total biofilm). Nitrite oxidizers were likely outcompeted from the system because of the free ammonia inhibition and the possibility that the aeration period (from intermittent aeration) was not sufficiently long for the NOB to be released from the competition for oxygen with heterotrophs and AOB. The nitrogen removal via nitrite in a SAGB reactor described in this study is applicable for high-ammonia-strength wastewater treatment, such as centrate or industrial wastes.     

The relationship between real-time and time-integrated coarse (2.5-10 micrm), intermodal (1-2.5 microm), and fine (<2.5 microm) particulate matter in the Los Angeles basin

A periodic review of the National Ambient Air Quality Standards for Particulate Matter by the U.S. Environmental Protection Agency (EPA) will assess the standards with respect to levels, particle size, and averaging times. Some members of the scientific community in the United States and Europe have suggested the use of PM1 instead of PM2.5 as the fine particle measurement standard. This proposed standard is intended to reduce the influence of coarse particle sources on PM2.5, because some evidence suggests that PM1-2.5 is dominated by coarse particulate matter (PM) sources. In this study, coarse (PM2.5-10), intermodal (PM1-2.5), and fine (PM2.5) mass concentrations at four different sites are measured with continuous and time-integrated sampling devices. The main objective is to compare variations in these three size ranges while considering the effects of location, sources, weather, wind speed, and wind direction. Results show strong correlations between PM1 and intermodal PM in receptor sites. The contribution of PM1-2.5 to PM2.5 is highest in the summer months, most likely due to enhanced long-range transport. Coarse PM is poorly correlated with intermodal PM. Continuous data suggest that PM1 is growing into PM1-2.5 via complex processes involving stagnation of the aerosol during high relative humidity conditions, followed by advection during daytime hours.     

Mobilization of colloids in groundwater due to infiltration of water at a coal ash disposal site

We investigated groundwaters in the vicinity of a coal ash site near an electric generating station in the western U.S.A. The purpose of the study was to ascertain why fine particles or colloids appear in some subsurface water samples there. If such fine particles are merely introduced during bailing or pumping operations which suspend otherwise immobile soil colloids, we should exclude these particulate materials from the water samples before analysis intended to quantify what is moving through the aquifer. However, if the colloids were truly suspended and moving with the groundwater flow in situ, then we should includes their contribution to our assessment of the mobile loads.Application of very careful sampling techniques (slow pumping rates, no atmospheric exposure) did not cause the large quantities of colloids observed previously to disappear from well water in which they occured. Additionally, the same sampling procedures did not cause similar abundances of colloids to appear in waters collected from neighboring wells installed and developed in the same manner and in the same geologic strata. Thus we believe sampling artifacts do not explain the colloids' presence in the groundwater samples.On the other hand, the groundwater chemistry and the nature of the suspended colloids (size, composition) strongly suggest these fine particles were suspended and therefore moving with the groundwater flow. At wells exhibiting large amounts of suspended colloids (≈10–100 mg L⁻¹), the water was enriched in CO₂ and depleted in O₂ relative to nearby locations. The colloids were typically between 0.1 and 2 μm in size and were primarily silicates. These results suggest to us that, where infiltrating water is percolating through a site that has been mixed with coal ash, the secondary carbonate mineral in the soils are being dissolved; removal of this cementing carbonate phase may consequently release soil silicate colloids to be carried in the flowing water.Such processes may enhance contaminant transport in groundwater by augmenting the pollutant load moving in the groundwater, and increasing the permeability of the porous medium to pollutant infiltration with water water and/or rainwater.     

The ecotoxicology of vegetable versus mineral based lubricating oils: 3. Coral fertilization and adult corals

Biodegradable vegetable-derived lubricants (VDL) might be less toxic to marine organisms than mineral-derived oils (MDL) due to the absence of high molecular weight aromatics, but this remains largely untested. In this laboratory study, adult corals and coral gametes were exposed to various concentrations of a two-stroke VDL-1A and a corresponding MDL to determine which lubricant type was more toxic to each life stage. In the fertilization experiment, gametes from the scleractinian coral Acropora microphthalma were exposed to water-accommodated fractions (WAF) of VDL-1A and MDL for four hours. The MDL and VDL-1A WAFs inhibited normal fertilization of the corals at 200 microg l(-1) total hydrocarbon content (THC) and 150 microg l(-1) THC respectively. Disturbance of a stable coral-dinoflagellate symbiosis is regarded as a valid measure of sub-lethal stress in adult corals. The state of the symbiosis in branchlets of adult colonies of Acropora formosa was monitored using indicators such as dinoflagellate expulsion and dark-adapted photosystem II yields of dinoflagellate (using pulse amplitude modulation fluorescence). An effect on symbiosis was measurable following 48 h exposure to the lubricants at concentrations of 190 microg l(-1) and 37 microg l(-1) THC for the MDL and VDL-1A respectively. GC/MS revealed that the main constituent of the VDL-1A WAF was the compound coumarin, added by the manufacturer to improve odour. The fragrance containing coumarin was removed from the lubricant formulation and the toxicity towards adult corals re-examined. The coumarin-free VDL-2 exhibited significantly less toxicity towards the adult corals than all of the other oil types tested, with the only measurable effect being a slight but significant drop in photosynthetic efficiency at 280 microg l(-1).