The role of door orientation on occupant injury in a nearside impact: a CIREN, MADYMO modeling and experimental study

OBJECTIVE: This study addressed the effects of vehicle height mismatch in side impact crashes. A light truck or SUV tends to strike the door of a passenger car higher causing the upper border to lead into the occupant space. Conversely, an impact centered lower on the door, from a passenger car, causes the lower border to lead. We proposed the hypothesis that the type of injury sustained by the occupant could be related to door orientation during its intrusion into the passenger compartment. METHOD: Data on door orientation and nearside occupant injuries were collected from 125 side impact crashes reported in the CIREN database. Experimental testing was performed using a pendulum carrying a frame and a vehicle door, impacting against a USDOT SID. The frame allowed the door orientation to be changed. A model was developed in MADYMO (v 6.2) using the more biofidelic dummies, BIOSID, and SIDIIs as well as USDOT SID. RESULTS: In side impact crashes with the lower border of the door leading, 81% of occupants sustained pelvic injury, 42% suffered rib fractures, and the rate of organ injury was 0.84. With the upper border leading, 46% of occupants sustained pelvic injury, 71% sustained rib fracture, and the rate of organ injuries per case increased to 1.13. The differences in the groups with respect to pelvic injury were significant at p = 0.01, rib fracture, p = 0.10, and organ injury, p = 0.001. Experimental testing showed that when the door angle changed from lower to upper border leading, peak T4 acceleration increased by 273% and pelvic acceleration decreased by 44%. The model demonstrated that when the door angle changed from lower to upper border leading, the USDOT SID showed a 29% increase in T4 acceleration and a 57% decrease in pelvic acceleration. The BIOSID dummy demonstrated a 36% increase in T1 acceleration, a 44% increase in abdominal rib 1 deflection, a 91% increase in thoracic rib 1 deflection, and a 33% decrease in pelvic acceleration. CONCLUSIONS: These data add more insight to the problem of mismatch during side impacts, where the bumper of the striking vehicle overrides the door beam, causing the upper part of the door to lead the intrusion into the passenger compartment. Even with the same delta V and intrusion, with the upper border of the door leading, more severe chest and organ injuries resulted. This data suggests that door orientation should be considered when testing subsystems for side impact protection.     

Temperature and parasitism by <Emphasis Type="BoldItalic">Asobara tabida</Emphasis> (Hymenoptera: Braconidae) influence larval pupation behaviour in two <Emphasis Type="BoldItalic">Drosophila</Emphasis> species

In holometabolous insects, pupation site selection behaviour has large consequences for survival. Here, we investigated the combined effects of temperature and parasitism by the parasitoid Asobara tabida on larval pupation behaviour in two of its main Drosophila sp. hosts differing in their climate origin. We found that larvae of Drosophila melanogaster—a species with a (sub)tropical origin—placed at 25°C pupated higher in rearing jars than those placed at 15°C. The opposite pattern was observed for Drosophila subobscura larvae—a species from temperate regions—which pupated lower, i.e. on or near the substrate at 25°C, than those placed at 15°C. When placed at 25°C, parasitized larvae of both species pupated closer to the substrate than unparasitized ones. Moreover, the Drosophila larvae that had been exposed and probably stung by A. tabida, but were not parasitized, pupated lower than the control unparasitized larvae. These results provide new insights of host behaviour manipulation by A. tabida larvae.     

The switching effect of environmental taxation within Bertrand differentiated duopoly

We investigate second-best optimal taxation of the polluting variety of a product in a Bertrand duopoly with differentiated varieties. The analysis provides novel insight on a useful social function of environmental regulation. Besides internalizing the environmental externality, the taxation of the polluting variety improves the matching of consumers and product varieties, and so creates a socially desirable business switching between the differentiated varieties.     

Use of blubber levels of progesterone to determine pregnancy in free-ranging live cetaceans

We tested the possibility of measuring progesterone levels in bubbler samples collected from free-ranging live bottlenose dolphins (n = 11) and long-finned pilot whales (n = 2) as a tool to evaluate the pregnancy status of individuals. Samples were collected during January 2004 and September–October 2005 in the Strait of Gibraltar and Gulf of Cadiz and used for sex-determination by genetic methods (skin samples) and for quantification of progesterone levels by enzyme immunoassay. Photo-identification tracking of females after taking the biopsy was used to observe the presence of newborns and, in this way, to determine if the female was pregnant at the time of sampling. Mean progesterone levels from pregnant bottlenose dolphins (n = 2) were around 9 times higher than those from non-pregnant females (n = 9), with no overlap between concentration ranges demonstrating that this method could constitute an effective tool for determining pregnancy in wild populations of bottlenose dolphins and other cetacean species.     

A regional inventory and monitoring setup to evaluate bark peeling damage by red deer (Cervus elaphus) in coniferous plantations in Southern Belgium

Sediment phosphorus (P) fractions and sorption characteristics and P release from intact sediment cores of Baiyangdian Lake in North China in spring 2009 were investigated. Results of chemical fractionation showed that total P (TP) content in sediment ranged from 443 to 611 mg kg(?-1). Of the P fractions including inorganic P (IP) and organic P (OP), IP was a dominant component of TP and present in the form of P bounded to calcium (Ca-P) while the bioavailable P content bounded to Al, Fe, and Mn oxides and hydroxides (Fe/Al-P) varied from 14 to 102 mg kg(?-1). The batch experiments showed that the sediments had appreciable maximum P adsorption capacity from 141.86 to 377.37 mg kg(?-1). However, the zero P equilibrium concentration (C?(eq))in most sampling sites was larger than the P concentration in water column. Accordingly, the sediments from those sampling sites would release P into the overlying water at the positive P flux rates as a P release source. Significant positive correlation between P flux rates and Fe/Al-P revealed that the sediment P release would mainly originate from the bioavailable P fraction. It is evident that the inherent phosphorus present in lake sediments would be a major threat to the water quality and ecosystem reservation in Baiyangdian lake.     

An in vitro bioassay to assess the potential global toxicity of waters on spermatogenesis: a pilot study

Environmental Science and Pollution Research - Many toxicants are present in water as a mixture. Male infertility is one of the environmental impacts in developed countries. Using our rat...     

Exposure to four chemical UV filters through contaminated sediment: impact on survival,hatching success,cardiac frequency,and aerobic metabolic scope in embryo-larval stage of zebrafish

Environmental Science and Pollution Research - UV filters are widely used in many pharmaceutical and personal care products such as sunscreen and cosmetics to protect from UV irradiation. Due to...     

Exploring barriers to climate change adaptation in the Swiss tourism sector

Increasingly, various sectors are affected by climate change and need to find ways to adapt with much public guidance and support. This paper examines the adaptation process of a sector that started it some time ago – Swiss Alpine tourism. It identifies barriers that may be relevant for all sectors, all along the successive phases of the adaptation process. It additionally identifies the barriers which are most important and how these can be overcome. In order to do this we use an online survey directed to Swiss tourism stakeholders. Our results indicate that both economic and social feasibility barriers are important impediments to the adjustment process, whereas the acceptability among inhabitants and the willingness to act of stakeholders appear less critical. These barriers can be overcome and adaptation facilitated with more and especially better information about the regional consequences of climate change and feasible adaptation measures, by some top-down leadership and coordination, and by providing financial support.     

Investigation of heat transfer and heterogeneous reactions during the slow cook off of a composite propellant

In this work, a new modelling of interactions between components of aluminium/ammonium perchlorate/HTPB propellant during slow heating is presented. The phenomenon was previously described by experimental approaches performed in the laboratory. Heat and mass balance will be considered both in the solid and gas phases. The interaction of the decomposition products of both ammonium perchlorate and HTPB binder is shown thanks to previous experiments and a specific numerical model allows us to reproduce this trend. Mass and heat transfers are taken into account in each particle of ammonium perchlorate and inside the matrix of the HTPB binder. The chemical reaction in the gas phase is in interaction with the adsorption desorption of several species with regard to the surface grains. The whole set of equations is solved thanks to Comsol multiphysic solver and the numerical results are compared with mass loss measurements by means of a thermogravimetric device.     

Evaluation of the Effect of Chemical or Enzymatic Synthesis Methods on Biodegradability of Polyesters

This work compares the biodegradability of polyesters produced by an esterification reaction between glycerol and oleic di-acid (D 18:1) issued from green chemical pathways, via either classical thermo-chemical methods, or an enzymatic method using the immobilized lipase of Candida antartica B (Novozym 435). An elastomeric polymer synthesized by enzymatic catalysis is more biodegradable than an elastomeric thermo-chemical polyester synthesized by a standard chemical procedure. This difference lies in percentage of the dendritic motifs, in values of the degree of substitution, and certainly in cross-links inducing an hyper-branched structure less accessible to the lipolytic enzymes in a waste treatment plant. However, when the elastomeric polymer synthesized by enzymatic catalysis is processed at high temperature as required for certain industrial applications, it presents an identical rate of biodegradation than the chemical polyester. The advantages of the thermo-chemical methods are greater speed and lower cost. Enzymatic synthesis appears be suited to producing polyesters, devoid of metallic catalysts, which must be used without processing at high temperature to keep a high biodegradability.