An investigation of the origin and mobility of phosphorus in freshwater sediments from Bort-Les-Orgues Reservoir, France

In order to assess the origin and the potential mobility of phosphorus (P) in the sediment of the Bort-Les-Orgues Reservoir, France, two sequential extraction schemes, i.e., the SMT (modified Williams method) and the Golterman schemes, were compared. Finally, the potential mobility of P in this sediment was estimated from results of sequential extraction. The SMT method appeared to be more satisfactory than the Golterman method, which is in accordance with results from a study currently carried out in the framework of the European programme Standards, Measurements and Testing. Iron-bound P and organic P were the dominant forms of P in the sediment; these forms are likely to be released at the sediment/water interface in case of anoxia and could diffuse into the water column, thus increasing the risk of eutrophication in this sensitive reservoir. The P stock (330 +/- 66 t) is not negligible and should be taken into account in any restoration project of the reservoir. The SMT procedure seems promising and will provide, in the near future, a valuable tool for water managers in the field of lake restoration.     

Megaprojects and social and environmental changes: The case of the Thai "water grid"

Large-scale development of irrigation has long been an attractive option of postwar development, and the Mekong region has been no exception. Thailand has developed approximately four million hectares of irrigated land, and its northeastern region (Isaan)--both the driest and poorest part of the country--has been the target of many water projects. However, "full development" of its potential has been constrained by the lack of storage sites and the difficulty of diverting water from the Mekong River. Several ambitious projects have been discussed during the last 50 y, all of which have been aimed at "greening Isaan." In 2003, the Thai administration launched the idea of a national "water grid" that would triple the area of irrigated land in the country. This paper analyzes the emergence of this megaproject, its governance, and its economic and environmental soundness.     

Cyclodextrins: a new efficient absorbent to treat waste gas streams

Volatile Organic Compounds (VOCs) in the air provoke health and environmental concerns. This paper focuses on the absorption method to treat industrial polluted air loaded with VOCs. The key variable of this treatment being the choice of a suitable liquid absorbent, the aim of this research work is to investigate the effectiveness and the regeneration of a new potential family of absorbent: cyclodextrins (CDs). All CDs derivatives tested are able to decrease the Henry's law constant of toluene: a reduction of volatility up to 95% may be obtained, depending on CD nature and concentration. Moreover, absorption experiments show that beta-CD, which presents the highest absorption ability, is 250 time more efficient than water. The absorption efficiency is not totally correlated with static experiments, suggesting that, in addition to Henry's law constants and inclusion compounds stability, toluene diffusion into such solutions has to be taken into account. It is also to be noted that salt and pH variations seem to have little influence on the absorption capacity of CDs, which may be of great interest for industrial applications. Finally, since production of solid compounds was not observed during these experiments and since temperature decreases the capture ability in a drastic way, regeneration of the washing solution can be achieved by heating the solution in combination with air stripping.     

Influence of Relative Humidity and Ozone on the Sampling of Volatile Organic Compounds on Carbotrap/Carbosieve Adsorbents

By using a dynamic dilution system, the atmospheric measurement of 11 selected toxics VOCs (ethylene, acetylene, propene, 1-butene, 1,3-butadiene, 1-pentene, 1-hexene, benzene, toluene, ethylbenzene, m+p-xylene) from the list WHO of 1996 and TO-14 method of US EPA by preconcentration by thermal desorption (TD), analysis by gas chromatography (GC), identification and quantification with a flame ionisation detector (FID) was developed and validated in term of metrology, especially the techniques of sampling of these VOCs with adsorbents cartridges "Air Toxics" when used with an "UMEG sampler" equipped in the inlet with a nafion membrane. In particular the influence of climatic conditions (temperature and relative humidity) and the influence of chemical factors like ozone, on the representativity of sampling were studied. Experiments made with various humidities showed that the addition of a nafion membrane in the inlet of the sampling system was required. Without this membrane, losses of compounds were observed for RH >50%. With this membrane, storage for 2 weeks in a refrigerator, as for canisters, did not induce a loss of compounds. No significative decrease of concentrations of the studied VOCs after 14 days storage, which are known to react with ozone, were observed with an ozone concentrations of 55 ppb. One explanation is that nafion membrane, placed in the inlet of the sampler, will neutralize ozone before entering the sampling tubes. This observation is in accordance with literature which states that the sampling of VOCs on Carbotrap cartridges without ozone scrubber induce a loss of compounds.     

A spatial-statistical approach for modeling the effect of non-point source pollution on different water quality parameters in the Velhas river watershed--Brazil

In this article, a methodology for evaluating the effect of land use/land cover on the quality of nearby stream water in a semiarid environment is described and tested on a large watershed in Southeastern Brazil. The approach aims at identifying the width of the riparian area having the strongest effect on different water quality parameters. The land use/land cover data were generated from remotely sensed data while water quality point data were supplied by a government agency. Testing was conducted for both the rainy and dry seasons in an effort to understand the direct effect of surface runoff. The approach combines cartographic modelling using a geographical information system (GIS) and statistics to establish the strength of the relationship between water quality, land use and the distance from the stream. Results suggest a strong relationship between land use/land cover and turbidity, nitrogen and fecal coliforms. They also suggest that each of these parameters has a unique behavior when distance from the stream is considered. Finally, although it was expected that the models would apply better during the wet season, some parameters had the opposite behavior and displayed a better fit during the dry season.     

Preparation of solar-enhanced AlZnO@carbon nano-substrates for remediation of textile wastewaters

Photoactive aluminum doped ZnO(AlZnO) was synthesized by sol-gel method.After that,AlZnO photocatalyst was deposited on five carbon-based materials(CBMs) using ultrasonic route followed by solid-state mixing using ball mill.The CBMs used were poly aniline(PANI),carbon nitride(CN),carbon nanotubes(CNT),graphene(G),and carbon nanofibers(CNF).The crystal phases,elemental compositions,morphological,and optical properties of the AlZnO@CBMs composites were investigated.Experimental results revealed that two of AlZnO@CBMs composites exhibited superior bleaching efficiency(100% removal) and photocatalytic stability(three cycles) for 50 μmol/L Methylene Blue(MB) contaminated water after 60 min irradiation in visible light at pH 6.5,0.7% H_2O_2,and 5 g/L inorganic salts.Under optimum conditions,AlZnO@CBMs nanocomposites were employed for the treatment of mixed dyestuffs composed of MB,Methyl Orange(MO),Astrazone Blue FRR(BB 69),and Rhodamine B(RhB) dyes under dark,ultraviolet,visible,and direct sunlight.For mixed dyestuffs,the AlZnO@G achieved the highest dye sorption capacity(60.91 μmol dye stuffs/g) with kinetic rate 8.22 × 10~(-3) min~(-1) in 90 min via multi-layer physisorption(Freundlich isotherm) on graphene sheet.In additions,AlZnO@CN offered the highest photo-kinetic rate(K_(photo)) of～54.1 × 10~(-3) min~(-1)(93.8% after 60 min) under direct sunlight.Furthermore,the selective radical trapping experiment confirmed that the holes and oxidative superoxide radicals are crucial on dyes photodegradation pathway.Owing to their superior performance,AlZnO@G and AlZnO@CN nanocomposites can offer an effective in-situ solar-assisted adsorption/photocatalytic remediation of textile wastewater effluents.     

Soil C and N models that integrate microbial diversity

Industrial agriculture is yearly responsible for the loss of 55–100 Pg of historical soil carbon and 9.9 Tg of reactive nitrogen worldwide. Therefore, management practices should be adapted to preserve ecological processes and reduce inputs and environmental impacts. In particular, the management of soil organic matter (SOM) is a key factor influencing C and N cycles. Soil microorganisms play a central role in SOM dynamics. For instance, microbial diversity may explain up to 77 % of carbon mineralisation activities. However, soil microbial diversity is actually rarely taken into account in models of C and N dynamics. Here, we review the influence of microbial diversity on C and N dynamics, and the integration of microbial diversity in soil C and N models. We found that a gain of microbial richness and evenness enhances soil C and N dynamics on the average, though the improvement of C and N dynamics depends on the composition of microbial community. We reviewed 50 models integrating soil microbial diversity. More than 90 % of models integrate microbial diversity with discrete compartments representing conceptual functional groups (64 %) or identified taxonomic groups interacting in a food web (28 %). Half of the models have not been tested against an empirical dataset while the other half mainly consider fixed parameters. This is due to the difficulty to link taxonomic and functional diversity.     

Academic expertise in assisting private companies in the fields of environment and environmental toxicology: the role of individual expertise

Environmental Science and Pollution Research - The scientific knowledge produced by academic research can be valued in all sectors of human activity, including private sector. The ROVALTAIN...     

Sperm-depleted males influence the reproductive behaviour of conspecifics

In many insect species, sperm-depleted males (SDMs, i.e. males that have exhausted their sperm after a given number of matings) remain sexually active and continue to mate females. Here, we investigated the behavioural modifications that occur in both sexes of the parasitoid Asobara tabida Nees (Hymenoptera: Braconidae), after matings by fertile males and sperm-depleted males. We show that (i) virgin females, mated females and females mated to a SDM exhibited different behaviours and that (ii) males responded differently to females depending on whether the females had previously mated with an SDM or not. Our findings demonstrate that SDM influenced the reproductive behaviour of both males and females, especially with regard to male responsiveness and female attractiveness. These findings are discussed in the context of adaptive behaviour and fitness maximization in both males and females.     

Bioaerosol sampling by a personal rotating cup sampler CIP 10-M

High concentrations of bioaerosols containing bacterial, fungal and biotoxinic matter are encountered in many workplaces, e.g. solid waste treatment plants, waste water treatment plants and sewage networks. A personal bioaerosol sampler, the CIP 10-M (M-microbiologic), has been developed to measure worker exposure to airborne biological agents. This sampler is battery operated; it is light and easy to wear and offers full work shift autonomy. It can sample much higher concentrations than biological impactors and limits the mechanical stress on the microorganisms. Biological particles are collected in 2 ml of liquid medium inside a rotating cup fitted with radial vanes to maintain an air flow rate of 10 l min(-1) at a rotational speed of approximately 7,000 rpm. The rotating cup is made of sterilisable material. The sampled particles follow a helicoidal trajectory as they are pushed to the surface of the liquid by centrifugal force, which creates a thin vertical liquid layer. Sterile water or another collecting liquid can be used. Three particle size selectors allow health-related aerosol fractions to be sampled according to international conventions. The sampled microbiological particles can be easily recovered for counting, incubation or further biochemical analysis, e.g., for airborne endotoxins. Its physical sampling efficiency was laboratory tested and field trials were carried out in industrial waste management conditions. The results indicate satisfactory collection efficiency, whilst experimental application has demonstrated the usefulness of the CIP 10-M personal sampler for individual bioaerosol exposure monitoring.