Invasion costs,impacts, and human agency: response to Sagoff 2020

Article impact statement: In an era of profound biodiversity crisis, invasion costs, invader impacts, and human agency should not be dismissed.     

Daily Updating of Operational Statistical Seasonal Water Supply Forecasts for the western U.S.1

Abstract: Official seasonal water supply outlooks for the western United States are typically produced once per month from January through June. The Natural Resources Conservation Service has developed a new outlook product that allows the automated production and delivery of this type of forecast year‐round and with a daily update frequency. Daily snow water equivalent and water year‐to‐date precipitation data from multiple SNOTEL stations are combined using a statistical forecasting technique (“Z‐Score Regression”) to predict seasonal streamflow volume. The skill of these forecasts vs. lead‐time is comparable to the official published outlooks. The new product matches the intra‐monthly trends in the official forecasts until the target period is partly in the past, when the official forecasts begin to use information about observed streamflows to date. Geographically, the patterns of skill also match the official outlooks, with highest skill in Idaho and southern Colorado and lowest skill in the Colorado Front Range, eastern New Mexico, and eastern Montana. The direct and frequent delivery of objective guidance to users is a significant new development in the operational hydrologic seasonal forecasting community.     

The development of alum rates to enhance the remediation of phosphorus in fluvial systems following manure spills

Following the remediation of animal manure spills that reach surface waters, contaminated streambed sediments are often left in place and become a source for internal phosphorus (P) loading within the stream in subsequent flow. The objective of this study was to develop treatment rates and combinations of alum and CaCO(3) to mitigate P from contaminated sediments of different particle size distributions following a manure spill. Sediment specific alum and CaCO(3) treatment rates were developed based upon the resultant alum treatment ranges established for each sediment type. Clay loam sediments required 54% more alum to mitigate P desorption relative to sediments that contain at least 60% sand. Amending sediments with the highest rates of alum/alum + CaCO(3), resulted in a 98-100% reduction in P desorption and a similar water column pH for all sediments types. Observations from this study demonstrated the effectiveness of alum/alum + CaCO(3) to increase P retention in sediments following a manure spill.     

Use of macroinvertebrate assemblages for assessing performance of stabilization ponds treating effluents from sugarcane and molasses processing

Wastewater discharge from sugarcane processing is a significant pollutant of tropical aquatic ecosystems. For most developing countries, monitoring of the level of pollutants is done mostly through chemical analysis, but this does not reflect potential impacts on aquatic assemblages. In addition, laboratory facilities for accurate concentration measurements are often not available for regular monitoring programs. In this study, we investigated the use of benthic macroinvertebrates for biological monitoring in western Kenya. Benthic macroinvertebrates were sampled in stabilization ponds treating wastewater from sugarcane- and molasses-based processing plants to assess their composition and abundance in relation to different concentrations of chemical variables. Optimum concentrations and tolerance values were identified for various taxa, and a biotic index was developed that combined tolerance values (ranked between 0 and 10) for the various macroinvertebrate taxa. A succession in composition and distribution of macroinvertebrate taxa was observed from the inlet to the outlet of the pond systems. Diptera dominated in the first ponds that had high concentrations of chemical oxygen demand (COD), biological oxygen demand (BOD₅), and nutrients, while intolerant Ephemeroptera, Plecoptera, and Trichoptera (EPT) appeared as the concentrations dropped in subsequent ponds. The effluent quality was classified as “good,” “fair,” and “poor,” corresponding with biotic index value ranges 0–3.50, 3.51–6.50, and 6.51–10, respectively. During validation, the index grouped sites with respect to levels of measured environmental variables. The study revealed that the developed biotic index would help in monitoring the quality of sugarcane processing and molasses effluents before release into recipient aquatic ecosystems, replacing the need for costly chemical analyses.     

Assessment of the functionality of a pilot-scale reactor and its potential for electrochemical degradation of calmagite, a sulfonated azo-dye

Electrochemical degradation (ECD) is a promising technology for in situ remediation of diversely contaminated environmental matrices by application of a low level electric potential gradient. This investigation, prompted by successful bench-scale ECD of trichloroethylene, involved development, parametric characterization and evaluation of a pilot-scale electrochemical reactor for degradation of calmagite, a sulfonated azo-dye used as a model contaminant. The reactor has two chambers filled with granulated graphite for electrodes. The system has electrical potential, current, conductivity, pH, temperature, water-level and flow sensors for automated monitoring. The reactor supports outdoor and fail-safe venting, argon purging, temperature regulation and auto-shutdown for safety. Treatment involves recirculating the contaminated solution through the electrode beds at small flow velocities mimicking low fluid-flux in groundwater and submarine sediments. The first phase of the investigation involved testing of the reactor components, its parametric probes and the automated data acquisition system for performance as designed. The results showed hydraulic stability, consistent pH behavior, marginal temperature rise (<5 degrees C) and overall safe and predictable performance under diverse conditions. Near complete removal of calmagite was seen at 3-10V of applied voltage in 8-10h. The effects of voltage and strength of electrolyte on degradation kinetics have been presented. Further, it was observed from the absorption spectra that as calmagite degrades over time, new peaks appear. These peaks were associated with degradation products identified using electrospray ionization mass spectrometry. A reaction mechanism for ECD of calmagite has also been proposed.     

Sub-cooled and flashing liquid jets and droplet dispersion II. Scaled experiments and derivation of droplet size correlations

This paper describes the results of the first stage of Phase III of a Joint Industry Project (JIP) on liquid jets and two-phase droplet dispersion. This stage included scaled experiments for water, gasoline, and cyclohexane for a range of superheats and nozzles with different aspect ratios. Additional experiments for butane and propane were conducted as a validation exercise and are discussed in the companion paper. Moreover this paper provides recommendations for atomisation correlations in the regimes of mechanical break-up, transition to flashing, and fully flashing. The objectives of this scaled experimental programme are to : (i) provide confidence in the previously proposed modelling methodology (Phase II) across a broad range of initial conditions (ii) update the models’ correlations to generalise further its applicability (iii) recommend further model improvements. Development of new correlations for Sauter Mean Droplet diameter (SMD) and droplet size distribution is based on a best fit of the current scaled experimental data. The new data endorses the previous tri-functional Phase II approach including regimes for mechanical break-up, transition to flashing, and fully flashing, which is hence updated in the new Phase III SMD model. Considerable effort is devoted to capturing the full droplet size range under low-superheat conditions. Also, new enhancements in PDA technology were adopted to enable better quality data under high-superheat conditions. The priority recommendation for further model improvement is better characterisation of the poor quality releases under low-superheat conditions, where this work indicates that extremely broad droplet size distributions are likely. A companion paper (Part I) presents a more general overview of the dispersion problem, implementation of the correlations and subsequent performance against both the current scaled experiments and additional large-scale butane experiments.     

Comparison of fine-scale acoustic monitoring systems using home range size of a demersal fish

We compared the results from fixed acoustic transmitters and transmitters implanted in lingcod Ophiodon elongatus provided by two fine-scale passive acoustic monitoring systems: the older Vemco^? Radio Acoustic Positioning (VRAP) system and the newer VR2W Positioning System (VPS) with either three or four receivers. The four-receiver VPS method calculated five times more positions of lingcod than VRAP and more than twice as many as the three-receiver VPS. Calculated positions of fixed transmitters were less precise with VRAP than either VPS approach. Measurements of home range for lingcod were similar between the four-receiver VPS and VRAP, which were both greater than the three-receiver VPS. Comparisons varied when lingcod were in/near complex habitats. As new technology develops, it is important to understand how new methods compare to previous methods. This may be important when describing patterns of movement or habitat use in the context of changes in habitat or management efforts.     

Measuring the environmental performance of IPPC industry: I. Devising a quantitative science-based and policy-weighted Environmental Emissions Index

This paper describes the derivation of an Environmental Emissions Index (EEI) intended to quantify the environmental performance of Integrated Pollution Prevention and Control (IPPC) installations and sectors. Characterisation and normalisation methods used in lifecycle analyses were applied to 20 routinely reported emissions parameters, pertaining to six environmental impact categories. Distance to policy targets for relevant emissions were used to weight impact categories, and link the EEI to policy priorities. Ireland and the EU15 were considered as scales of context. The European Pollutant Emission Register was a convenient source of normalisation data, but restricted the context of the EEI to industrial emissions, and distorted outputs. Using national and EU15 total loading estimates for normalisation resulted in an EEI that better reflected the relative contribution of reported emissions towards overall environmental pressures. Using Ireland's pharmaceutical sector as a case study indicated that weighting factors, and the toxicity range of NMVOC emissions, were the largest sources of EEI uncertainty. Through the integration of inventory data, scientific characterisation, and policy targets, the EEI translates reported emissions data from IPPC installations and sectors into a benchmark of environmental performance. It may be regarded as an evolving tool of potential utility to regulators and policy makers.