Characterizing pesticide sorption and degradation in macro scale biopurification systems using column displacement experiments

The efficiency of biopurification systems to treat pesticide-contaminated water was previously studied in microcosms. To validate the obtained results, macrocosm systems were set-up. Four pesticides (linuron, isoproturon, bentazone, and metalaxyl) were continuously applied to ten different organic substrate mixes. Retention of the pesticides was similar and in some cases slightly lower in the macrocosms compared to the microcosms. Differences in retention between the different mixes were however minimal. Moreover, the classification of the retention strength of the pesticides was identical to that observed in microcosms: linuron > isoproturon > metalaxyl > bentazone. Monod kinetics were used to describe delayed degradation, which occurred for isoproturon, metalaxyl and bentazone. No breakthrough of linuron was observed, thus, this pesticide was appointed as the most retained and/or degraded pesticide, followed by isoproturon, metalaxyl and bentazone. Finally, most of the matrix mixes efficient in degrading or retaining pesticides were mixes containing dried cow manure.     

The Social Meaning of Carbon Dioxide Emission Trading Institutional Capacity Building for a Green Market in Costa Rica

Forests offer good possibilities for the sequestration of carbon dioxide. This service can be commodified by the introduction of carbon (dioxide) credits, which can be traded on a carbon market. The premise of this paper is that the traditional economic view on the construction of these carbon markets is a too simplistic one, particularly, because it neglects the social meaning of a carbon market for developing countries. From their viewpoint as suppliers of carbon credits such a market has a broader meaning. It must be seen as a social mechanism for improving both the living conditions of local people and a more encompassing improvement of the environment than climate as such. What initially might be labelled as a carbon market might better be understood as a more encompassing 'green market'. The agreement between Costa Rica and Norway, officially known as the Reforestation Conservation Activities Implemented Jointly Project (RFCAIJP) represents a clear example of a green market. In this paper, we study the development, characteristics and benefits of that market, asking the question what lessons can be learned from this first practical experiences. More specifically we focus on the conditions that have made this type of agreement successful.     

Parasite competition hidden by correlated coinfection: using surveys and experiments to understand parasite interactions

Within most free-living species exists a cryptic community of interacting parasites. By combining multiscale field data with manipulative experiments, we evaluated patterns of parasite coinfection in amphibian hosts and their underlying mechanisms. Surveys of 86 wetlands and 1273 hosts revealed positive correlations between two pathogenic trematodes (Ribeiroia ondatrae and Echinostoma trivolvis) both between wetlands and within individual hosts. In infection and coinfection experiments, Ribeiroia caused greater pathology than Echinostoma, including high host mortality (24%) and severe limb malformations (75%). No interactive effects were noted for host pathology, but both parasites decreased the per capita persistence of one another by 17-36%. Thus, in spite of consistently positive associations from field data, these parasites negatively affected the persistence of one another, likely via cross immunity (apparent competition). These findings underscore the danger of inferring parasite interactions from coinfection patterns and emphasize the potential disconnect between within-host processes (e.g., competition) and between-host processes (e.g., exposure and transmission). Here, correlated coinfections likely resulted from similarities in the parasites' host requirements and heterogeneity in host susceptibility or exposure. Understanding complex interactions among parasites depends critically on the scale under consideration, highlighting the importance of combining coinfection field studies with mechanistic experiments.     

Sampling approaches to predict urban street noise levels using fixed and temporary microphones

Requirements for static (prediction of L(den) and diurnal averaged noise pattern) and dynamic (prediction of 15 min and 60 min evolution of L(Aeq) and statistical levels L(A90,)L(A50) and L(A10)) noise level monitoring are investigated in this paper. Noise levels are measured for 72 consecutive days at 5 neighboring streets in an inner-city noise measurement network in Gent, Flanders, Belgium. We present a method to make predictions based on a fixed monitoring station, combined with short-term sampling at temporary stations. It is shown that relying on a fixed station improves the estimation of L(den) at other locations, and allows for the reduction of the number of samples needed and their duration; L(den) is estimated with an error that does not exceed 1.5 dB(A) to 3.4 dB(A) according to the location, for 90% of the 3 × 15 min samples. Also the diurnal averaged noise pattern can be estimated with a good accuracy in this way. It was shown that there is an optimal location for the fixed station which can be found by short-term measurements only. Short-term level predictions were shown to be more difficult; 7 day samples were needed to build models able to estimate the evolution of L(Aeq,60min) with a RMSE ranging between 1.4 dB(A) and 3.7 dB(A). These higher values can be explained by the very pronounced short-term variations appearing in typical streets, which are not correlated between locations. On the other hand, moderately accurate predictions can be achieved, even based on short-term sampling (a 3 × 15 minute sampling duration seems to be sufficient for many of the accuracy goals set related to static and dynamic monitoring). Finally, the method proposed also allows for the prediction of the evolution of statistical indicators.     

Lessons learned from applying adaptation pathways in flood risk management and challenges for the further development of this approach

Worldwide, an increase in flood damage is observed. Governments are looking for effective ways to protect lives, buildings, and infrastructure. At the same time, a large investment gap seems to exist—a big difference between what should necessarily be done to curb the increase in damage and what is actually being done. Decision-makers involved in climate adaptation are facing fundamental (so-called deep) uncertainties. In the course of time, the scientific community has developed a wide range of different approaches for dealing with these uncertainties. One of these approaches, adaptation pathways, is gaining traction as a way of framing and informing climate adaptation. But research shows that “very little work has been done to evaluate the current use of adaptation pathways and its utility to practitioners and decision makers” (Lin et al. 2017, p. 387). With this paper, the authors, as action researchers and practitioners involved in two of the world’s largest real-life applications of this approach in flood risk management, aim to contribute to filling in that gap. Analysis of the experience in the United Kingdom and the Netherlands in long-term planning in flood risk management shows that the adaptation pathways approach is effective in keeping decision processes going forward, to the final approval of a long-term plan, and helps increase awareness about uncertainties. It contributes to political support for keeping long-term options open and motivates decision-makers to modify their plans to better accommodate future conditions. When it comes to implementing the plans, there are still some major challenges, yet to be addressed, amongst others: the timely detection of tipping points in situations with large natural variability, the inclusion of measures that prepare for a switch to transformational strategies, and the retention of commitment of regional and local authorities, non government organizations, and the private sector, to climate adaptation as national policies move from blueprint planning to adaptive plans. In delivering this feedback, the authors hope to motivate the scientific community to take on these challenges.     

Do wood mice (Apodemus sylvaticus L.) use food selection as a means to reduce heavy metal intake?

Food preference of wood mice from two with heavy metals polluted sites and two unpolluted sites was tested under laboratory and field conditions with two-way choice experiments. In the laboratory, wood mice preferred to eat acorns from unpolluted sites over acorns from polluted sites. Previous experience with polluted food had no influence on food choice. Preference was negatively related to acorn metal content. Furthermore, the nutrient content of the acorn endosperm was consistently lower in polluted sites. We therefore conclude that wood mice used absolute metal concentration in the acorn, nutrient content, or both as a food selection cue. The results of the laboratory experiment could not be confirmed under field conditions. We hypothesized that search time constraints due to the presence of predators, competitors and/or other stress factors in the field have prevented the mice to forage selectively.     

Sorption kinetics and its effects on retention and leaching.

Sorption of pesticides to substrates used in biopurification systems is important as it controls the system's efficiency. Ideally, pesticide sorption should occur fast so that leaching of the pesticide in the biopurification system is minimized. Although modeling of pesticide transport commonly assumes equilibrium, this may not always be true in practice. Sorption kinetics have to be taken into account. This study investigated the batch sorption kinetics of linuron, isoproturon, metalaxyl, isoxaben and lenacil on substrates commonly used in a biopurification system, i.e. cow manure, straw, willow chopping, sandy loam soil, coconut chips, garden waste compost and peat mix. The first-order sorption kinetics model was fitted to the observed pesticide concentrations versus time resulting in an estimated kinetic rate constant alpha. Sorption appeared to be fast for the pesticides linuron and isoxaben, pesticides which were classified as immobile, while less mobile pesticides displayed an overall slower sorption. However, the substrate does not seem to be the main parameter influencing the sorption kinetics. Coconut chips, which is a substrate with a high organic matter content showed slow sorption for most of the pesticides. The effect of different estimated alpha values on the breakthrough of pesticides through a biopurification system was evaluated using the HYDRUS 1D model. Significant differences in leaching behavior were observed as a result of the obtained differences in sorption kinetics.     

An attempt to electrically enhance phytoremediation of arsenic contaminated water

Water polluted with arsenic presents a challenge for remediation. A combination of phyto- and electro-remediation was attempted in this study. Four tanks were setup in order to assess the arsenic removal ability of the two methods separately and in combination. Lemna minor was chosen for As remediation and collected from a ditch in Utrecht, The Netherlands. The tanks were filled with surface water without any pre-cleaning, therefore containing various elements including metals as Mn (2.9 mg L(-1)), Cu (0.05 mg L(-1)), Fe (1.39 mg L(-1)), and Ba (0.13 mg L(-1)). This water was then spiked with As and allocated to a feed container, guaranteeing a continuous flow of 0.12 mL s(-1) to each tank. Two experiments were performed: Exp. 1 with 3 consecutive stages with rising applied voltage and Exp. 2, with a constant voltage over a period of 6 d. Measurements of pH and temperature were taken every working day, as well as water samples from outlets of all tanks including feed container for control. From the present study, there was no evidence that As had been taken up by the plants, but a strong depletion of As was observed in the tanks where current was applied. Preliminary results clearly showed that applying voltage to the electrodes caused 90% removal of As from the spiked surface water.     

Trade-Offs Between Forest Protection and Wood Supply in Europe

Forest protection is one of the main measures to prevent loss of biological and landscape diversity. This study aimed to assess to what extent forests are currently protected and how felling restrictions affect the potential annual wood supply within 27 European Union member states, Norway, and Switzerland and to discuss trade-offs between intensified use of forest biomass and forest protection efforts. Protected forests covered 33 million ha (20 % of total forest area) in 2005, of which 16 million ha was protected for biodiversity and the remaining area for landscape diversity. Within the protected areas, on average 48 % of the volume cannot be harvested in forests protected for biodiversity and 40 % in forests protected for landscapes. Consequently, 73 million m³ (10 % of the annual theoretical potential supply from the total forest area) of wood cannot be felled from the protected forests in Europe. Protected forests do not necessarily affect wood supply given the current demand for wood in Europe. However, if demand for wood from European forests for material and energy use significantly increases, the impact of existing protected forest networks may become significant after all. On the other hand, wood harvesting is allowed to a fair extent in many protected areas. Hence, the question could be raised whether biodiversity and landscape diversity within designated areas are sufficiently protected. Careful planning is required to accommodate both the protection of biological and landscape diversity and demand for wood, while not forgetting all other services that forests provide.     

Fast and Living Ring-Opening Polymerization of l-Lactide Initiated with In-situ–Generated Calcium Alkoxides

The ring-opening polymerization of l-lactide with calcium alkoxides generated in-situ from bis(tetrahydrofuran)calcium bis[bis(trimethylsilyl)amide] and 2-propanol are presented. The polymerization in THF at room temperature proceeds rapidly and in a living manner, giving poly(l-lactide)s of controlled molecular weight, low polydispersity, and tailored end-functionalities. Kinetic studies show the absence of an induction period and a pseudo-first order rate constant of 6.41 L mol^–1 min^–1, which is significantly higher than for related Y₅(-O)(O ⁱ Pr)_13– or aluminum alkoxide-initiated polymerizations. The initiation involves a two-step process: (1) alcoholysis of bis(tetrahydrofuran)calcium bis[bis(trimethylsilyl)amide] to give the corresponding calcium alkoxide and (2) ring-opening of l-lactide via acyl-oxygen cleavage and insertion into the calcium-alkoxide bond. In the presence of excess alcohol, fast and reversible exchange between free alcohol molecules and coordinated alkoxide ligands takes place. This allows tuning of the poly(l-lactide) molecular weight over a wide range.