Phytoavailability and geospeciation of cadmium in contaminated soil remediated by Rhodobacter sphaeroides

A microorganism was isolated from oil field injection water and identified as Rhodobacter sphaeroides. It was used for the remediation of simulated cadmium-contaminated soil. The phytoavailability of Cd was investigated through wheat seedling method to determine the efficiency of remediation. It was found that after remediation, the accumulation of Cd in wheat roots and leaves decreased by 67% and 53%, respectively. The Cd speciation in soil was determined with Tessier extraction procedure. It was found that the total Cd content in soil did not change during the experiments, but the geo-speciation of Cd changed remarkably. Among the five fractions, the concentration of exchangeable phases decreased by 27-46% and that of the phases bound to Fe-Mn oxides increased by 22-44%. The decrease of Cd accumulation in wheat showed significant positive correlation with the decrease of exchangeable phases. It could be concluded that the remediation of R. sphaeroides was carried out through the conversion of Cd to more stable forms. The decrease of sulfate concentration in supernatant indicated that the R. sphaeroides consumed sulfate.     

Distribution and bioavailability of ceria nanoparticles in an aquatic ecosystem model

Along with the increasing utilization of engineered nanoparticles, there is a growing concern for the potential environmental and health effects of exposure to these newly designed materials. Understanding the behavior of nanoparticles in the environment is a basic need. The present study aims to investigate the distribution and fate of ceria nanoparticles in an aquatic system model which consists of sediments, water, hornworts, fish and snails, using a radiotracer technique. Concentrations of ceria in the samples at regular time intervals were measured. Ceria nanoparticles were readily removed from the water column and partitioned between different organisms. Both snail and fish have fast absorption and clearance abilities. Hornwort has the highest bioaccumulation factors. At the end of the experiment, sediments accumulated most of the nanoparticles with a recovery of 75.7 ± 27.3% of total ceria nanoparticles, suggesting that sediments are major sinks of ceria nanoparticles.     

某钢厂烧结烟气脱硫系统滤袋失效原因分析

分析了聚苯硫醚自身特性,从而了解目前烧结烟气脱硫系统袋式除尘器中选择其作为滤料的原因。并就目前某钢厂烧结烟气脱硫系统实际发生的滤袋失效问题,通过扫描电镜、EDS能谱分析及烧失量实验对滤袋进行分析,发现材料中混入的玻璃纤维是造成其失效的主要原因,为今后实际工程中滤袋的选择提供依据,从而尽量减少不必要的损失,确保烟气脱硫项目的正常运行。     

原位臭氧氧化污泥减量工艺的运行效能

采用ASBR/SBR原位臭氧污泥减量工艺,重点研究了原位臭氧氧化对SBR段污泥产率和出水水质的影响。两个相同的ASBR/SBR组合工艺同时运行,每隔3个周期向臭氧投加组SBR的曝气阶段原位间歇投加臭氧,臭氧投加量为0.027 g O3/g MLSS,连续运行40 d;对照组不投加臭氧作为对比。结果表明,原位臭氧氧化实现污泥减量约43.9%,臭氧投加组SBR段平均污泥产率系数为0.1447 g SS/g SCOD,而对照组为0.2580 g SS/g SCOD,投加组没有惰性污泥的累积,并且污泥沉淀性能得到改善。原位臭氧氧化对出水水质影响不大,投加组与对照组相比,臭氧投加3周期后的出水COD、NH4+-N、TN和TP平均值分别为47.8、0.76、14.1和6.4 mg/L,去除率分别下降了4%、2%、3%和7.7%,其中COD、NH4+-N和TN均能达到《城镇污水处理厂污染物排放标准》(GB18918-2002)一级A标准。     

一种活性污泥总DNA提取方法的优化

对3种活性污泥DNA提取方法———传统蛋白酶K-SDS-氯仿异戊醇法(CPSCI法)、液氮研磨法和脱腐处理法进行了对比,并针对CPSCI法从污泥量、保温时间、裂解方式及沉淀时间等4个方面进行了优化。结果表明,优化的蛋白酶K-氯仿-异戊醇法(OPSCI法)采用污泥量0.10 g、37℃静置10 min,加SDS常温旋涡振荡及异丙醇直接离心等条件可获得长度在23.1 kb左右的DNA,OD260nm/OD280nm为1.86,稀释10倍后即可进行16S rDNA PCR。该方法重复性好,提取得率高,纯度好,操作简便,为常规实验室开展活性污泥微生物多样性研究提供了帮助。     

Degradation of o-toluidine by fluidized-bed Fenton process: statistical and kinetic study

Background, aim, and scope  

The optimal conditions of o-toluidine degradation by fluidized-bed Fenton process were determined using Box–Behnken designs (BBD). The BBD can be used to find the optimal conditions in multivariable systems. The optimal conditions obtained by the design were further applied in the kinetic analysis of o-toluidine oxidation in fluidized-bed Fenton process.     

玉米深加工废水的混凝实验

在室温条件下,分别选用聚合氯化铝(PAC)、聚合氯化铝铁(PAFC)及三氯化铁(FeCl3)对玉米深加工废水进行混凝实验。综合考虑各种混凝剂对磷、COD以及SS的去除效果,最终选取PAC作为混凝剂。采用PAC和聚丙烯酰胺(PAM)作为复合混凝剂,对其去除效果做进一步研究,并确定了最佳投加量及pH值。实验结果表明,在PAC投加量25mg/L,PAM投加量0.5 mg/L,pH为8条件下,混凝效果最佳。磷、COD、SS去除率可分别达到90.1%、53.3%和88.2%,对应的出水质量浓度分别为0.41、26.8和2 mg/L。     

铈改性Al_2O_3担载Pd催化剂的CO氧化性能研究

浸渍法制备了Al2O3+CeO2为载体的Pd催化剂,对制备中各因素对催化剂效果的影响作了初步研究.考察了活性组分含量与催化荆性能的关系以及焙烧温度、水蒸气对催化剂活性的影响.结果表明,稀土Ce元素的存在使催化剂的性能得到明显改善.制备过程中焙烧步骤对催化剂的活性影响很大,催化剂制备必须高于600 ℃焙烧.     

Gas/particle partitioning of atmospheric PCDD/Fs in a satellite town in Eastern China

Gas/particle partitioning of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) in ambient air was investigated in a satellite town in Eastern China from April 2007 to January 2008 comprehending large temperature variations (from 3 to 34 °C, daily average). Molecular weight, molecular structure and ambient temperatures are the three major factors that govern the gas/particle partitioning of atmospheric PCDD/Fs throughout the year. Generally, good agreements were obtained (except for winter) between measured particulate fractions and theoretical estimates of both the Junge–Pankow adsorption model and Harner Bidleman absorption model using different sets of subcooled liquid vapor pressure and octanol–air partition coefficient (K_oa), respectively. Models utilizing estimates, derived from gas chromatographic retention indices (GC-RIs), are more accurate than that of entropy-based. Moreover, during winter, the K_oa-based model using the GC-RIs approach performs better on lower chlorinated PCDD/Fs than that of -based. Furthermore, possible sources of mismatch between measured and predicted values in winter (3–7 °C) were discussed. Gas adsorption artifact was demonstrated to be of minor importance for the phenomena observed. On the other hand, large deviations of slopes (m_r) and intercepts (b_r) in logK_p vs. plots from theoretical values are observed in the literature data and these are found to be linearly correlated with ambient temperatures (P<0.001) in this study. This indicates that the non-equilibrium partitioning of PCDD/Fs in winter may be significantly influenced by the colder temperatures that may have slowed down the exchange between gaseous and particulate fractions.