废纸造纸废水结垢原因及防治对策研究

针对无锡某废纸造纸企业产生的污水经厌氧-好氧-化学混凝处理后,出水在放流池产生结垢现状,对各段污水中主要离子浓度进行跟踪分析,并对结垢的组分、结垢原因、机理和防治结垢对策进行了探讨。结果表明:垢样的主要成分为CaCO3;污水中含有较高浓度的钙离子和碳酸氢根离子是导致结垢的主要原因,较高的水温、pH值、流速、流动状态、池壁的粗糙程度以及PAC的投加对结垢也有一定的影响;最佳防治对策为使用Ca(OH)2+PAM代替PAC+PAM混凝,保证COD达标排放同时,也解决了出水结垢问题。     

地下渗滤系统处理农村生活污水的研究

在天津武清区一村落构建了2个并行的地下渗滤系统,考察了其对农村生活污水的处理效果。该系统水力负荷为10 cm/d,处理能力为50 t/d。填充介质选用土壤、陶粒、炉渣和两种自然有机质,按5∶2∶2∶1的比例配置的人工土层。结果表明地下渗滤系统对污水中各种主要污染因子均有一定的去除效果,在进水COD和C/N较低的不利条件下,COD、总磷、氨氮、总氮、悬浮物均得到有效去除,出水中各项污染指标平均浓度均达到《城镇污水处理厂污染物排放标准》中的一级A标准;具体到不同的污染指标,添加了不同有机质的2个并行系统的处理效果也有所不同。总体上看,地下渗滤系统作为农村生活污水的处理设施有很好的应用前景。     

采油废水的深度处理回用

采用溶气气浮—生物接触氧化—膜分离组合工艺深度处理采油废水。实验结果表明,出水水质满足热采锅炉进水要求。该法可年处理废水1.3×105m3,产水率按50%计,年节约新鲜水和废水回灌费用共计77.88万元,年节水效益为21.71万元。     

固定化白腐真菌反应器与接触氧化反应器联用处理癸二酸生产废水

采用固定化白腐真菌(WRF)反应器与接触氧化反应器联用处理癸二酸废水。在WRF反应器中,以汽曝玉米秸秆为载体,并添加铜、铁促进白腐真菌生长和产酶作用,载体的使用寿命约为45 d。在进水苯酚平均质量浓度为69.36 mg/L、平均进水COD为1 648.81 mg/L的条件下,经WRF反应器处理后,苯酚平均质量浓度降至7.59 mg/L,平均出水COD降至478.03 mg/L;再经接触氧化反应器处理后,苯酚平均质量浓度降至1.65 mg/L,平均出水COD降至297.31 mg/L。     

Integrated emergy,energy and economic evaluation of rice and vegetable production systems in alluvial paddy fields: Implications for agricultural policy in China

China is the largest rice producing and consuming country in the world, but rice production has given way to the production of vegetables during the past twenty years. The government has been trying to stop this land-use conversion and increase the area in rice-vegetable rotation. Important questions that must be answered to determine what strategy is best for society are, “What is the reason behind this conversion?”; “Which system is more productive and which is more sustainable?”; and “How can economic policy be used to adjust the pattern of farmland use to attain sustainable development?” To answer these questions, a combined evaluation of these agricultural production systems was done using emergy, energy and economic methods. An economic analysis clearly showed that the reason for this conversion was simply that the economic output/input ratio and the benefit density of the vegetable production system were greater than that of rice. However, both energy and emergy evaluations showed that long-term rice was the best choice for sustainable development, followed by rotation systems. The current price of rice is lower than the em-value of rice produced from the long-term rice system, but higher than that of rice produced from the rotation system. Scenario analysis showed that if the government increases the price of rice to the em-value of rice produced from the long-term rice system, US$0.4/kg, and takes the value of soil organic matter into account, the economic output/input ratios of both the rice and rotation systems will be higher than that of the vegetable system. The three methods, energy, emergy and economics, are different but complementary, each revealing a different aspect of the same system. Their combined use shows not only the reasons behind a system’s current state or condition, but also the way to adjust these systems to move toward more sustainable states.     

An Estimation of the Effects of China’s Priority Forestry Programs on Farmers’ Income

In the late 1990s, the Chinese government initiated some new programs and consolidated other existing ones of ecological restoration and resource development in its forest sector, and renamed them as “Priority Forestry Programs,” or PFPs. They include the Natural Forest Protection Program (NFPP), the Sloping Land Conversion Program (SLCP), the Desertification Combating Program around Beijing and Tianjin (DCBT), the Shelterbelt Development Program (SBDP), and the Wildlife Conservation and Nature Reserve Development Program (WCNR). In addition to improving the environmental and resource conditions, a frequently reiterated goal of these PFPs is to increase rural households’ income, therefore discussing why looking at rural household income impacts might be an important part of forest program evaluation. Thus, an interesting and important question is: How has implementing the PFPs affected the farmers’ income and poverty status? This article addresses this question using a fixed-effects model and a panel dataset that covers 1968 households in four provinces for ten consecutive years (1995–2004). The empirical evidence indicates that their effects are mixed. The SLCP, the SBDP, and the NFPP have made positive impact and, by far, the SLCP has the largest effect. But the WCNR and the DCBT still have not had a pronounced overall effect due to their short time span of execution, even though they may have exerted certain influence at the margin. Notably, the impact of the WCNR, if any, is negative.     

盐酸脱附Pb(Ⅱ)负载氨基膦酸树脂的基本性能

氨基膦酸树脂是一种常用的广谱性重金属螯合树脂,对水中的Pb(Ⅱ)具有很好的选择性分离去除能力,但吸附Pb(Ⅱ)后的树脂再生较为困难。系统研究了盐酸脱附Pb(Ⅱ)-负载氨基膦酸树脂D860的基本性能,优化了基本脱附参数。实验表明,采用盐酸作为脱附剂具有较为良好的脱附效果,10%吸附量树脂脱附反应平衡较快仅需10 min,脱附本身受Pb(Ⅱ)在盐酸溶液中的溶解度影响显著。脱附流速从1 BV/h升高到5 BV/h,脱附效果受到的影响很小。升高温度可以提高PbCl2溶解度,进而提高脱附效率。固定床脱附采用1.0 mol/L盐酸,在1 BV/h和303 K条件下,仅需7 BV脱附剂即可实现较高的脱附效率。     

电镀污泥的热处理特性以及对金属回收的影响

焙烧-酸浸法可有效回收电镀污泥中的有价金属,而污泥的热处理特性是决定能否采用焙烧预处理的重要因素。研究了氧化焙烧和还原焙烧对污泥成分和金属浸出性的影响,并对焙烧前后的污泥进行了金属形态分析和X射线衍射(XRD)分析。结果表明,焙烧预处理实现了污泥减量和金属富集;ES1经氧化焙烧后金属浸出率接近原泥,Cu的浸出率达99%;ES2的还原焙烧效果优于氧化焙烧,特别是Cu的浸出率超过97%,XRD分析发现,还原焙烧过程中金属Cu被还原为铁铜合金;2种焙烧均造成了ES3中目标金属Ni的浸出率的降低;金属浸出性的下降与残渣态的形成有关。     

炼油废水污泥脱水工艺条件的优化

采用化学除油降黏—污泥调理—离心脱水工艺处理某炼油厂废水处理系统的混合污泥,并对工艺条件进行优化。实验结果表明,最佳的工艺条件为：化学除油降黏阶段处理体系的pH=4,反应温度35 ℃,H₂O₂加入量 2 g/L,m（H₂O₂）∶ m（Fe²⁺）=4,反应时间 60 min;污泥调理反应阶段的CaO加入量7.0 g/L;离心脱水阶段在分离因数为1 558时脱水5 min。在此条件下,得到的泥饼的含水率为70.0%~75.0%（w）,含油率小于2%（w）,污泥比阻约为3.0×10⁷ s²/g。     

Effect of temperature and particle size on the thermal desorption of PCBs from contaminated soil

Thermal desorption is widely used for remediation of soil contaminated with volatiles, such as solvents and distillates. In this study, a soil contaminated with semivolatile polychlorinated biphenyls (PCBs) was sampled at an interim storage point for waste PCB transformers and heated to temperatures from 300 to 600 °C in a flow of nitrogen to investigate the effect of temperature and particle size on thermal desorption. Two size fractions were tested: coarse soil of 420–841 μm and fine soil with particles <250 μm. A PCB removal efficiency of 98.0 % was attained after 1 h of thermal treatment at 600 °C. The residual amount of PCBs in this soil decreased with rising thermal treatment temperature while the amount transferred to the gas phase increased up to 550 °C; at 600 °C, destruction of PCBs became more obvious. At low temperature, the thermally treated soil still had a similar PCB homologue distribution as raw soil, indicating thermal desorption as a main mechanism in removal. Dechlorination and decomposition increasingly occurred at high temperature, since shifts in average chlorination level were observed, from 3.34 in the raw soil to 2.75 in soil treated at 600 °C. Fine soil particles showed higher removal efficiency and destruction efficiency than coarse particles, suggesting that desorption from coarse particles is influenced by mass transfer.