Geostatistical 3-dimensional integration of measurements of soil magnetic susceptibility

In soil magnetometry, two types of measurements are usually performed. The first type is measurements performed on the soil surface, frequently using an MS2D sensor. The second type includes measurements of magnetic susceptibility carried out in the soil profile, usually to a depth of about 30 cm. Up to now, such measurement results were analyzed separately. However, it is possible and advantageous to integrate these two types of measurements. The goal of the study was to integrate measurements of magnetic susceptibility performed on the soil surface and in the soil profile. More specifically, the goal was to obtain 3-dimensional spatial distributions of magnetic susceptibility of the topsoil horizon. Results show that it is possible to effectively integrate measurements of magnetic susceptibility performed on the soil surface and in the soil profile. Moreover, the 3-dimensional spatial distribution that is obtained shows the magnetic susceptibility of the top 20 cm of soil, which includes the soil horizons where most of the heavy metals are accumulated. The analysis of such a spatial distribution can be very helpful in delineating areas where the heightened magnetic susceptibility is a result of the influence of anthropogenic pollution from those areas where it results from lithogenic origin. It is possible to investigate where the volumes of soil with heightened magnetic susceptibility are located in the soil profile and in this way investigate which characteristic type of soil profile it is.     

Geographical location and key sensitivity issues of post-industrial regions in Europe

Primary objectives of our work were to spatially delineate post industrial areas of the EU-27 and indicate key environmental, social and economic sensitivity issues for these regions. The density of industrial sites within NUTS-x regions for EU-27 countries was assessed by using CORINE 2000 land cover layer. A development of postindustrial society in Europe represents a strong geographic diversity. There are distinct historical and current differences between regions which form major groups, comprising similar internal characteristics and definable trends in environmental and socioeconomic sense. Regions grouped into postindustrial clusters are fundamentally different from the European average, and are facing specific problems related to global market and political changes. Eastern postindustrial regions can be characterized as socially and economically weak, exhibiting high unemployment rate, low GDP, negative population growth and a strong environmental pressure, represented by a high density of dump sites. Most of the western EU postindustrial areas have been successfully recovered and moved into new economy as shown by most of the indicators. In urban postindustrial zones, however, emission sources of pollutants seem to continually be a major problem--not necessarily in terms of exceeding thresholds, but through a remarkable difference in the amount of pollutants produced relative to other regions.     

Multi-elemental analysis of Lentinula edodes mushrooms available in trade

ABSTRACT

The present study investigated the content of 62 elements in the fruiting bodies of Lentinula edodes (Shiitake mushroom) cultivated commercially in Poland on various substrates from 2007–2015. The general mean content (mg kg^?1 dry weight (DW)) of the studied elements ranked in the following order: K (26,335) > P (11,015) > Mg (2,284) > Ca (607) > Na (131) > Zn (112) > Fe (69) > Mn (33) > B (32) > Rb (17) > Cu (14.5) > Al (11.2) > Te (2.9) > As (1.80) > Cd (1.76) > Ag (1.73) > Nd (1.70) > Sr (1.46) > Se (1.41) > U (1.11) > Pt (0.90) > Ce (0.80) > Ba (0.61) > Co (0.59) > Tl (0.58) > Er (0.50) > Pb (0.42) > Li (0.40) > Pr (0.39) > Ir (0.37) > In (0.35) > Mo (0.31) > Cr (0.29) > Ni (0.28) > Sb (0.26) > Re (0.24) > Ti (0.19) > Bi (0.18) > Th (0.12) > La (0.10) = Pd (0.10) > Os (0.09) = Zr (0.09) > Rh (0.08) > Ho (0.07) > Ru (0.06) > Sm (0.04) = Eu (0.04) = Tm (0.04) > Gd (0.03) > Sc (0.02) = Y (0.02) > Lu (0.01) = Yb (0.01) = V (0.01). The contents of Au, Be, Dy, Ga, Ge, Hf, and Tb were below the limits of detection (0.02, 0.02, 0.01, 0.01, 0.01, 0.01, 0.02 mg kg^?1 respectively). The concentrations of Al, As, B, Ba, Ca, Cd, Cr, Er, Fe, In, Lu, Mn, Nd, Sr, Ti, Tm, and Zr were comparable over the period the mushrooms were cultivated. The study revealed that Lentinula edodes contained As and Cd at levels potentially adverse to human health. This highlights the need to monitor these elements in food products obtained from this mushroom species and ensure that only low levels of these elements are present in cultivation substrates.     

Sorption of ionic liquids onto soils: experimental and chemometric studies

Chemometric analyses are a great tool to support typical experimental studies of the interactions of xenobiotics with natural environment. Such interpretations are able to determine statistically significant correlations and finally lead to identification of the major sorption factors. However, to effectively use chemometrics a bigger data set is required. Even though the ionic liquids are intensively studied, their complete fate or prediction of their behavior in the natural environment is still unclear. Therefore, to evaluate and distinguish the patterns of interactions of ILs in soil environment by chemometrics, sorption of nine ionic liquids (imidazolium and pyridinium chlorides) on 11 types of various soils was tested. Experimental studies indicated that compounds with longer alkyl side chains were sorbed far more strongly than weakly lipophilic ones. Moreover, salts with short and/or hydroxylated derivatives were more mobile in soils/sediments and thus, might cause a danger of contamination of surface or ground waters. Cluster analysis revealed that ionic liquids form two major clusters according to interaction with soil surface - one grouping compounds with short and hydroxylated alkyl side chains and the second with the rest of compounds. Pairwise scatterplots for correlations between soil variables and sorption coefficients indicated that the main soil parameter responsible for the sorption was cation exchange capacity. Correlation of sorption coefficients, K(d), with pH indicated the existence of lower sorption potency in lower pH values.     

Adsorption of Remazol Red 198 onto magnetic N-lauryl chitosan particles: equilibrium, kinetics, reuse and factorial design

Purpose

The discharge of colored effluents from industries is an important environmental issue and it is indispensable to remove the dyes before the water gets back to the rivers. The magnetic adsorbents present the advantage of being easily separated from the aqueous system after adsorption by positioning an external magnetic field.

Methods

Magnetic N-lauryl chitosan (L-Cht/??-Fe₂O₃) particles were prepared and characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, transmission electron microscopy, and vibrating sample magnetometry. Remazol Red 198 (RR198) was used as a reactive dye model for adsorption on L-Cht/??-Fe₂O₃. The adsorption isotherms were performed at 25°C, 35°C, 45°C, and 55°C and the process was optimized using a 2³ factorial design (analyzed factors: pH, ionic strength, and temperature). The desorption and regeneration studies were performed in a three times cycle.

Results

The characterization of the material indicated that the magnetic particles were introduced into the polymeric matrix. The pseudo-second order was the best model for explaining the kinetics and the Langmuir?CFreundlich was the best-fitted isotherm model. At room temperature, the maximum adsorption capacity was 267?mg?g^?1. The material can be reused, but with a decrease in the amount of adsorbed dye.

Conclusions

L-Cht/??-Fe₂O₃ is a promising material to remove RR198 and probably other similar reactive dyes from aqueous effluents.     

A system coupling hybrid biological method with UV/O<Subscript>3</Subscript> oxidation and membrane separation for treatment and reuse of industrial laundry wastewater

The possibilities of application of a three-step system combining hybrid biological treatment followed by advanced UV/O₃ oxidation with in situ generated O₃ and membrane separation (ultrafiltration (UF) and nanofiltration (NF)) to treat and reuse the wastewater from an industrial laundry are presented. By the application of a hybrid moving bed biofilm reactor (HMBBR), the total organic carbon concentration was reduced for about 90 %. However, since the HMBBR effluent still contained organic contaminants as well as high concentrations of inorganic ions and exhibited significant turbidity (8.2 NTU), its further treatment before a possible reuse in the laundry was necessary. The UV/O₃ pretreatment prior to UF was found to be an efficient method of the membrane fouling alleviation. During UF, the turbidity of wastewater was reduced below 0.3 NTU. To remove the inorganic salts, the UF permeate was further treated during NF. The NF permeate exhibited very low conductivity (27–75 μS/cm) and contained only small amounts of Ca²⁺ and Mg²⁺; thus ,it could be reused at any stage of the laundry process.     

Chitosan/glyphosate formulation as a potential,environmental friendly herbicide with prolonged activity

Although there are many reports on the dangers posed by glyphosate, this herbicide is still one of the most popular and widely used total weed killers. Therefore, great effort should be made to minimize exposure to this herbicide and limit its losses into the environment. The aim of this study was to prepare a new formulation consisted of various molecular weight chitosans with glyphosate and their evaluation toward active substance release, phytotoxicity, and preliminary herbicidal efficiency. The phytotoxicity study of the obtained chitosan/glyphosate formulations was determined based on the Organisation for Economic Co-operation and Development 208 guideline. Among all tested formulations evaluated for phytotoxicity, that containing the highest molecular weight of chitosan was found to be the least toxic, showing simultaneously the most effective herbicidal activity against selected weeds. The release rate of glyphosate from the obtained formulations was dependent on the molecular weight and viscosity of chitosan.     

Response of the lichen Cladonia rei Schaer. to strong heavy metal contamination of the substrate

The phenomenon of mass occurrence of the lichen Cladonia rei in extremely contaminated post-smelting slag dumps was studied in relation to metal accumulation capacity of this lichen. The research was aimed to evaluate the relationships between element contents in the thalli and in the corresponding substrate. The study was conducted in terms of a wide spectrum of Zn, Cd, Pb and As contents. The concentrations of these elements in the lichen thalli and substrate samples were measured. Various regression models were considered to find the best fitted one that greatly reflects the dependencies. Various Cladonia species and the hyperaccumulator Diploschistes muscorum were also included in the study for comparison purposes. Specific non-linear regression models described by a power function reflected relationships between Zn and Cd contents in C. rei thalli and in the host substrate in the most reliable way. The relationship for As was also noted, but none significant model was found. Contrarily, Pb concentrations in the thalli varied independently of the metal levels in the substrate. Nevertheless, the concentrations of all measured heavy metals in C. rei thalli are relatively low considering the frequently enormous substrate contamination. Different Cladonia species demonstrated a generally similar accumulation capacity and could be considered as weak accumulators. The restrained accumulation pattern may be one of the important attributes of C. rei which facilitates its colonisation of extremely contaminated dumps. This finding highlights ecological importance of this species as stable and resistant pioneer in such affected sites.     

Photocatalytic decomposition of methanol over La/TiO<Subscript>2</Subscript> materials

Lanthanum-modified TiO₂ photocatalysts (0.2–1.5 wt% La) were investigated in the methanol decomposition in an aqueous solution. The photocatalysts were prepared by the common sol-gel method followed by calcination. The structural (X-ray diffraction, Raman, X-ray photoelectron spectroscopy), textural (N₂ physisorption), and optical properties (diffuse reflectance spectroscopy, photoelectrochemical measurements) of all synthetized nanomaterials were correlated with photocatalytic activity. Both pure TiO₂ and La-doped TiO₂ photocatalysts proved higher yields of hydrogen in comparison to photolysis. The photocatalyst with optimal amount of lanthanum (0.2 wt% La) showed almost two times higher amount of hydrogen produced at the same time as in the presence of pure TiO₂. The photocatalytic activity increased with both increasing photocurrent response and decreasing amount of lattice and surface O species. It has been shown that both direct and indirect mechanisms of methanol photocatalytic oxidation participate in the production of hydrogen. Both direct and indirect mechanisms take part in the formation of hydrogen.     

Effects of visitor pressure on understory vegetation in Warsaw forested parks (Poland)

Visitor’s access to understorey vegetation in park forest stands results in the impoverishment of plant species composition and a reduction in habitat quality. The phenomenon of biotic homogenisation is typical in urban landscapes, but it can proceed differently depending on the scale, a detail that has not been observed in previous studies. This research was carried out in seven Warsaw parks (both public and restricted access). Thirty-four forested areas were randomly selected, some subjected to strong visitors’ pressure and some within restricted access areas, free of such impacts. The latter category included woodlands growing in old forest and secondary habitats. Public access to the study areas contributed to the disappearance of some forest species and their replacement by cosmopolitan non-forest species, leading to loss of floristic biodiversity in areas of high ecological importance at the city scale. Some human-induced factors, including soil compaction and changes in soil pH, moisture and capillary volume, were found to cause habitat changes that favoured native non-forest plants. Despite changes in species composition, the taxonomic similarity of understorey vegetation in both categories—public access and restricted access—was comparable. In a distance gradient of measurements taken around selected individual trees, there was found to be significant variation (in light, soil pH and compaction) affecting the quality and quantity of understorey vegetation (including rare species). In conclusion, the protection of rare forest species could be achieved by limiting access to forested areas, particularly in old forest fragments, and we highly recommend its consideration in the proposal of future park restoration plans.