Histopathological changes in the earthworm Eisenia andrei associated with the exposure to metals and radionuclides

Earthworms were exposed for 56 d to a contaminated soil, from an abandoned uranium mine, and to the natural reference soil LUFA 2.2. Histological changes in earthworm’s body wall (epidermis, circular and longitudinal muscles) and gastrointestinal tract (chloragogenous tissue and intestinal epithelium) were assessed, after 0, 14 and 56 d of exposure. Results have shown alterations in all the studied tissues after 14 d of exposure (except for the intestinal epithelium), yet more severe effects were registered after 56 d of exposure. Herein we report histopathological alterations as a good biomarker for the evaluation of soil quality. We also demonstrate that morphological changes in the body wall and gastrointestinal tract, are important endpoints that could be added to earthworm’s standardized tests, for the evaluation of soil toxicity, as part of the risk assessment of contaminated areas.     

Development of the DGT technique for Hg measurement in water: comparison of three different types of samplers in laboratory assays

The Diffusive Gradients in Thin films (DGT) technique is an operationally defined method to determine the dissolved fraction of trace elements in water. The aim of this study was to develop this technique for the measurement of the bioavailable mercury species in natural waters. For that purpose, three types of DGT units (commercial, manufactured with agarose diffusive gel (DG) and manufactured with polyacrylamide DG) were tested under controlled conditions using an Hg(II) solution both with and without dissolved organic matter (DOM). An acid digestion method using aqua regia was optimised to efficiently digest the resin gel discs prior to analysis. A good performance was obtained for the three DGT types when deployed in a DOM-free mercury solution in the laboratory, and it was demonstrated that polyacrylamide gel can be used as diffusive layer for mercury sampling. However, when the DGT units were deployed in a mercury solution containing DOM, performance differences were observed. Furthermore, the mass of background mercury (blanks) varied among the different DGT types. In the light of the results, the devices manufactured with polyacrylamide DG seemed to be the best choice for dissolved mercury determination.     

Carbon isotope signature of dissolved inorganic carbon (DIC) in precipitation and atmospheric CO2

This paper describes results of chemical and isotopic analysis of inorganic carbon species in the atmosphere and precipitation for the calendar year 2008 in Wroc?aw (SW Poland). Atmospheric air samples (collected weekly) and rainwater samples (collected after rain episodes) were analysed for CO₂ and dissolved inorganic carbon (DIC) concentrations and for δ¹³C composition. The values obtained varied in the ranges: atmospheric CO₂: 337-448 ppm; δ¹³C_CO2 from −14.4 to −8.4‰; DIC in precipitation: 0.6-5.5 mg dm⁻³; δ¹³C_DIC from −22.2 to +0.2‰. No statistical correlation was observed between the concentration and δ¹³C value of atmospheric CO₂ and DIC in precipitation. These observations contradict the commonly held assumption that atmospheric CO₂ controls the DIC in precipitation. We infer that DIC is generated in ambient air temperatures, but from other sources than the measured atmospheric CO₂. The calculated isotopic composition of a hypothetical CO₂ source for DIC forming ranges from −31.4 to −11.0‰, showing significant seasonal variations accordingly to changing anthropogenic impact and atmospheric mixing processes.     

Phosphorus effect on Zn adsorption-desorption kinetics in acid soils

The adsorption-desorption kinetics of Zn in the absence and presence of P was studied by using the stirred flow chamber technique. The results thus obtained were compared with those previously obtained for Cu. As with copper, the simultaneous addition of P and Zn in a 1:1 mole ratio to soil was found to significantly increased Zn adsorption relative to the absence of P. Unlike Cu, however, Zn was only adsorbed at fast adsorption sites in the absence of P. In any case, the increased adsorption of Zn in the presence of P was largely due to slow adsorption sites, where Zn²⁺ ion acted as a bridging element between P and organic matter. Following adsorption in both the presence and absence of P, Zn was desorbed to a much higher extent than was Cu. However, the proportion of Zn desorbed after adsorption in the presence of P was significantly lower than in the absence of P. This indicates that Zn binds more strongly to adsorbing surfaces in the presence of P than in its absence.     

Biofilm formation and microbial activity in a biofilter system in the presence of MTBE, ETBE and TAME

Emerging water contaminants derived from unleaded gasoline such as methyl tert-butyl ether (MTBE), ethyl tert-butyl ether (ETBE) and tert-amyl methyl ether (TAME), are in need of effective bioremediation technologies for restoring water resources. In order to design the conditions of a future groundwater bioremediating biofilter, this work assesses the potential use of Acinetobacter calcoaceticus M10, Rhodococcus ruber E10 and Gordonia amicalis T3 for the removal of MTBE, ETBE and TAME in consortia or as individual strains. Biofilm formation on an inert polyethylene support material was assessed with scanning electron microscopy, and consortia were also analysed with fluorescent in situ hybridisation to examine the relation between the strains. A. calcoaceticus M10 was the best coloniser, followed by G. amicalis T3, however, biofilm formation of pair consortia favoured consortium M10-E10 both in formation and activity. However, degradation batch studies determined that neither consortium exhibited higher degradation than individual strain degradation. The physiological state of the three strains was also determined through flow cytometry using propidium iodide and 3′-dihexylocarbocyanine iodide thus gathering information on their viability and activity with the three oxygenates since previous microbial counts revealed slow growth. Strain E10 was observed to have the highest physiological activity in the presence of MTBE, and strain M10 activity with TAME was only maintained for 24 h, thus we believe that biotransformation of MTBE occurs within the active periods established by the cytometry analyses. Viable cell counts and oxygenate removal were determined in the presence of the metabolites tert-butyl alcohol (TBA) and tert-amyl alcohol (TAA), resulting in TBA biotransformation by M10 and E10, and TAA by M10. Our results show that A. calcoaceticus M10 and the consortium M10-E10 could be adequate inocula in MTBE and TAME bioremediating technologies.     

Influence of soluble copper on the electrokinetic properties and transport of copper oxychloride-based fungicide particles

This article describes the influence of dissolved copper on the electrokinetic properties and transport of a copper oxychloride-based fungicide (COF) in porous media. The Zeta potential (ζ) of COF particles increases (viz. becomes less negative) with increasing concentration of Cu(2+) in the bulk solution. ζ decreases for COF when the electrolyte (NaNO(3)) concentration is raised from 1 to 10mM. This can be ascribed to ion correlation of Cu(2+) in the electrical double layer (EDL). COF transport tests in quartz sand columns showed the addition of Cu(2+) to the bulk solution to result in increased retention of the metal. Modelling particle deposition dynamics provided results consistent with kinetic attachment. Based on the effect of soluble Cu on colloid mobility, the transport of particulate and soluble forms of copper is coupled via the chemistry of pore water and colloid interactions. Mutual effects between cations and colloids should thus be considered when determining the environmental fate of particulate and soluble forms of copper in soil and groundwater (especially at copper-contaminated sites).     

Historical trends of polychlorinated dibenzo-p-dioxins and dibenzofurans in three dated sediment cores from Mexico

This paper describes the first report of dioxins and furans (PCDDs/Fs) in sediment cores from Mexico. Sedimentation rates and vertical fluxes were estimated using ²¹⁰Pb dating. Two cores correspond to marine sediments and one to an endorheic lake. Concentrations of PCDDs/Fs found in the three sites are typical of non-impacted areas with low concentrations when compared to reference values. However the PCDDs/Fs sediment profiles show an increasing concentration trend in the upper core sections. This behavior is different from that found at many sites around the globe where diminishing concentrations have been reported. A strong predominance of OCDD was observed, and a comparison to typical composition profiles of industrial and other sources did not result in clear origin assignments for these measured compounds. We suggest that local sources may be responsible for the increase in concentration and, because these undetermined sources have not been curtailed, their importance is still growing.     

Air pollution assessment based on elemental concentration of leaves tissue and foliage dust along an urbanization gradient in Vienna

Foliage dust contains heavy metal that may have harmful effects on human health. The elemental contents of tree leaves and foliage dust are especially useful to assess air environmental pollution. We studied the elemental concentrations in foliage dust and leaves of Acer pseudoplatanus along an urbanization gradient in Vienna, Austria. Samples were collected from urban, suburban and rural areas. We analysed 19 elements in both kind of samples: aluminium, barium, calcium, copper, iron, potassium, magnesium, sodium, phosphor, sulphur, strontium and zinc. We found that the elemental concentrations of foliage dust were significantly higher in the urban area than in the rural area for aluminium, barium, iron, lead, phosphor and selenium. Elemental concentrations of leaves were significantly higher in urban than in rural area for manganese and strontium. Urbanization changed significantly the elemental concentrations of foliage dust and leaves and the applied method can be useful for monitoring the environmental load.     

Monitoring of heavy metal concentrations in home outdoor air using moss bags

One monitoring station is insufficient to characterize the high spatial variation of traffic-related heavy metals within cities. We tested moss bags (Hylocomium splendens), deployed in a dense network, for the monitoring of metals in outdoor air and characterized metals’ long-term spatial distribution and its determinants in Girona, Spain. Mosses were exposed outside 23 homes for two months; NO₂ was monitored for comparison. Metals were not highly correlated with NO₂ and showed higher spatial variation than NO₂. Regression models explained 61-85% of Cu, Cr, Mo, Pb, Sb, Sn, and Zn and 72% of NO₂ variability. Metals were strongly associated with the number of bus lines in the nearest street. Heavy metals are an alternative traffic-marker to NO₂ given their toxicological relevance, stronger association with local traffic and higher spatial variability. Monitoring heavy metals with mosses is appealing, particularly for long-term exposure assessment, as mosses can remain on site many months without maintenance.