Catalytic Gasification of Coal Using Eutectic Salts: Recovery,Regeneration, and Recycle of Spent Eutectic Catalysts

Abstract

Catalyst recovery studies were conducted for gasified chars produced from steam gasification of Illinois #6 coal catalyzed with two different catalyst systems. A ternary (43.5 mol% Li₂ CO₃ –31.5 mol% Na₂ CO₃ –25 mol% K₂ CO₃ ) and a binary (29 mol% Na₂ CO₃ –71 mol% K₂ CO₃ ) eutectic catalyst system were used for gasifying coal. Various extraction schemes, such as water extraction, H₂ SO₄ extraction, and acetic acid extraction, were evaluated with respect to their extraction efficiencies. Effects of major process variables, such as solvent-to-char ratio, mixing time, temperature, and concentration, on the extraction efficiency were evaluated. A process schematic for the entire catalyst recovery, regeneration, and recycle scheme was developed and the preliminary process economics were determined based on these extraction schemes. H₂ SO₄ extraction was found to be the most desirable. It also turned out to be more attractive than a once-through throwaway system.     

Renewable hydrocarbons through biomass hydropyrolysis process: challenges and opportunities

Considering the current issues of carbon control and the desire to become less dependent on imported oil, the utilization of renewable hydrocarbons for the reduction of CO₂ emission and production of liquid synthetic fuels/chemicals has been proposed by researchers worldwide. Efforts to make chemicals/fuels from renewable resources have escalated over the past few years. Biomass-based renewable hydrocarbons are considered to be one of the sources with the highest potential to contribute to the energy needs of modern society for both developed and developing economies worldwide. Fast pyrolysis is becoming an important thermal route to convert biomass to liquid fuels; however, the raw bio-oils obtained have a number of negative properties such as high acidity, high water content, and variable viscosity over time. To overcome this problem and produce bio-oil of good quality, process of ‘hyropyrolysis’ has been developed. The scope for using pyrolysis under hydrogen pressure and also by process of hydropyrolysis followed by in situ hydroconversion of vapors to give oils with much lower oxygen contents has been reviewed.     

Effect of pressure on the hydropyrolysis of Jatropha seed deoiled cake

The necessity to move towards a sustainable economy is increasing day by day owing to various problems like climate change, increasing crude oil prices, etc. In this line, hydropyrolysis of Jatropha seed deoiled cake has been carried out at various pressures of hydrogen (1, 20, 40 and 52 bar) at 450 °C. With an increase in pressure under the experimental conditions of present study from 1 to 40 bar, the yield of bio-oil is found to have increased and beyond 40 bar the bio-oil yields have decreased. It has been observed that the liquid bio-oil yield is highest at 17 wt% at 40 bar. The FTIR spectrum of the bio-oil and char at 40 bar shows maximum functionality, indicating the clear opening of the macromolecular structure. The EDAX analysis of the hydropyrolysis char obtained at 40 bar pressure show a maximum of 85 wt% carbon and minimum of oxygen 13 wt%.     

Degradation of anionic surfactants during drying of UASBR sludges on sand drying beds

Anionic surfactant (AS) concentrations in wet up-flow anaerobic sludge blanket reactor (UASBR) sludges from five sewage treatment plants (STPs) were found to range from 4480 to 9233mgkg(-1)drywt. (average 7347mgkg(-1)drywt.) over a period of 18 months. After drying on sand drying beds (SDBs), AS in dried-stabilized sludges averaged 1452mgkg(-1)drywt., a reduction of around 80%. The kinetics of drying followed simple first-order reduction of moisture with value of drying constant (k(d))=0.051d(-1). Reduction of AS also followed first-order kinetics. AS degradation rate constant (k(AS)) was found to be 0.034d(-1) and half-life of AS as 20 days. The order of rates of removal observed was k(d)>k(AS)>k(COD)>k(OM) (drying >AS degradation>COD reduction>organic matter reduction). For the three applications of dried-stabilized sludges (soil, agricultural soil, grassland), values of risk quotient (RQ) were found to be <1, indicating no risk.     

Predicted growth of world urban food waste and methane production.

Landfill gas emissions are one of the largest anthropogenic sources of methane especially because of food waste (FW). To prevent these emissions growing with world population, future FW best management practices need to be evaluated. The objective of this paper was therefore to predict FW production for 2025 if present management practices are maintained, and then, to compare the impact of scenario 1: encouraging people to stay in rural areas and composting 75% of their FW, and; of scenario 2, where in addition to scenario 1, composting or anaerobically digesting 75% of urban FW (UFW). A relationship was established between per capita gross domestic product (GDP) and the population percentage living in urban areas (%UP), as well as production of municipal solid waste (MSW) and UFW. With estimated GDP and population growth per country, %UP and production of MSW and UFW could be predicted for 2025. A relatively accurate (R(2) > 0.85) correlation was found between GDP and %UP, and between GDP and mass of MSW and FW produced. On a global scale, MSW and UFW productions were predicted to increase by 51 and 44%, respectively, from 2005 to 2025. During the same period, and because of its expected economic development, Asia was predicted to experience the largest increase in UFW production, of 278 to 416 Gkg. If present MSW management trends are maintained, landfilled UFW was predicted to increase world CH4 emissions from 34 to 48 Gkg and the landfill share of global anthropogenic emissions from 8 to 10%. In comparison with maintaining present FW management practices, scenario 1 can lower UFW production by 30% and maintain the landfill share of the global anthropogenic emissions at 8%. With scenario 2, the landfill share of global anthropogenic emissions could be further reduced from 8 to 6% and leachate production could be reduced by 40%.     

Role of water hyacinth in the health of a tropical urban lake

The paper assesses health of the tropical urban Robertson Lake, Jabalpur which receives domestic sewage from neighboring human inhabitation and is infested with water hyacinth. Peak density of this macrophyte was 12.5 t dw ha(-1). The water-column was anaerobic (0.6 to 1.9 mg O2 L(-1)), neutral in pH, and enriched with inorganic carbon (23.5 to 37.1 mg L(-1)), NH4-N (0.48 to 2.96 mg L(-1)), and organic nitrogen and phosphorus. Density of heterotrophic bacteria was high (6.8 to 15x10(5) cfu ml(-1)) along with that of total coliforms and fecal bacteria. Species diversity of phytoplankton and submerged macrophytes was very low. Growing stands of water hyacinth could store up to 613 g C m(-2), 23.5 g N m(-2) and 5.5 g P m(-2) and released them during decomposition. The release of nutrients was 3-4 times faster than the uptake. Water hyacinth stabilized water quality and provided substantial support to bacterial density, which in turn contributed significantly to its growth and nutrient dynamics. Turnover of water hyacinth was only 70-80%, adding approximately 175 t humus in the lake. The results denote poor health of the lake, characterized by low species diversity, fast shallowing, dominance of detritus food--webs, and the water unsuitable for human consumption.     

Investigation on microstructural and mechanical properties of microwave processed dissimilar joints

In the present work, microwave joining of stainless steel (SS-316) to mild steel (MS) in bulk form has been successfully carried out using a multimode applicator at 2.45 GHz and 900 W. Principles of hybrid heating were employed using a susceptor medium so as to initiate coupling of microwave with the metals. A nickel based metallic powder was used as a sandwich layer between the bulk pieces. Samples were exposed to microwave radiation in atmospheric conditions. Resulting joints were characterized using field emission scanning electron microscope (FESEM), X-ray diffractometer, microhardness tester and universal testing machine. Microstructure study showed the faying surfaces were well fused and got bonded on either side of the base material. Formation of cementite and metallic carbides were evidenced. The average observed Vickers’ microhardness of core of the joint area was observed to be 133 H_v with 0.58% porosity. The ultimate tensile strength of the joint was found to be 346.6 MPa with percentage elongation of 13.58%. Fractography reveals that the joints failed due to both shearing of the brittle carbides and oxides as well as due to plastic flow of the ductile matrix under tensile loading.     

Plasma lipid profiles and risk of cardiovascular disease on occupational exposure in Karimnagar

Occupational exposure is unregulated in developing countries like India, and becoming the most common cause of disease of environmental origin. The present study was aimed to investigate the effects of occupational exposure on plasma lipid profiles, and risk of cardiovascular diseases. A total of 79 human volunteers were included in the study. Control subjects were healthy housewives of Karimnagar, India. Occupationally exposed individuals included different occupational workers like petrol station attendants, battery chargers, drivers, welders, pesticide-exposed workers, painters, and auto mechanics. These subjects were shown to be chronic occupationally-exposed for at least three years, and neither associated with any other chronic pathological conditions like hypertension or diabetes, nor under any medication other than analgesics during the month preceding the study. Subjects with excessive high or low caloric intake were excluded from the study. Total cholesterol (TC), LDL cholesterol, triglycerides (TG), VLDL cholesterol, LDL/HDL cholesterol, and TC/HDL ratio in these subjects were significantly higher than those in control subjects, whereas HDL cholesterol was not markedly affected. Blood pressure (systolic and diastolic), and other anthropometric parameters (body mass index (BMI), body fat index (BFI), body surface area (BSA)) were not significantly different between groups. Data suggest that chronic occupational exposure increases plasma lipid levels and is thereby associated with cardiovascular complications.     

Twenty five years of industrial development: a study of resource use rates and macro-efficiency indicators for five Asian countries

Economic and population growth in Asia over the last three decades has been unprecedented. While conventional economic indicators have been increasing consistently, indicators of resource and environmental quality have been deteriorating, raising questions about the implications of future growth. Economic growth in the future is considered to be contingent on ensuring a more efficient use of natural resources, while simultaneously striving to reduce environmental impacts. We examine time trends of three efficiency indicators; agricultural efficiency, energy efficiency of economic production and carbon efficiency of energy use, for the five most populous countries in Asia in order to assess whether industrial development has lead to increased resource use efficiency and an associated reduction in total resource use and environmental impacts. Our results indicate that agricultural efficiency has decreased in all five countries. Results are mixed for energy and carbon efficiencies. Where increases in energy and carbon efficiency have occurred, they have been completely overwhelmed by absolute increases in energy use and carbon emissions caused by increases in the scale of economic activity. Based on this analysis, we study the potential for further improvements and policy implications for future food supply, energy consumption and carbon emissions in the region.     

A LOW COST DRIP IRRIGATION SYSTEM FOR SMALL FARMERS IN DEVELOPING COUNTRIES1

ABSTRACT: In areas where water is scarce, drip irrigation provides the most efficient way to conserve irrigation water, but its cost of £1000 an acre is prohibitive for most small farmers in developing countries. The cost was reduced by 90 percent by (1) making dripper lines moveable, so that each line reaches ten rows instead of one; (2) replacing 25-cent emitters with simple 0.70 mm holes punched by a heated needle; and (3) using £3.00 off-the-shelf 20 liter containers with cloth filters in place of expensive filter systems. This reduced the cost of a half-acre system to £50. The low cost system was field tested in the hill areas of Nepal, and in mulberry cultivation in Andhra Pradesh, India. Uniformity of flow from emitters was 73–84 percent. Small farmers reported that the low cost trickle irrigation system cut labor requirements in half, and doubled the area irrigated by the same amount of water. The low cost drip system is likely to be widely adopted by small farmers in semi-arid and hilly regions.