The academic medical centre and nongovernmental organisation partnership following a natural disaster

The global response to the 12 January 2010 earthquake in Haiti revealed the ability to mobilise medical teams quickly and effectively when academic medical centres partner non-governmental organisations (NGO) that already have a presence in a zone of devastation. Most established NGOs based in a certain region are accustomed to managing the medical conditions that are common to that area and will need additional and specialised support to treat the flux of myriad injured persons. Furthermore, an NGO with an established presence in a region prior to a disaster appears better positioned to provide sustained recovery and rehabilitation relief. Academic medical centres can supply these essential specialised resources for a prolonged time. This relationship between NGOs and academic medical centres should be further developed prior to another disaster response. This model has great potential with regard to the rapid preparation and worldwide deployment of skilled medical and surgical teams when needed following a disaster, as well as to the subsequent critical recovery phase.     

Assessment of Ambient Air Quality in Urban Centres of Haryana (India) in Relation to Different Anthropogenic Activities and Health Risks

Considering the mounting evidences of the effects of air pollution on health, the present study was undertaken to assess the ambient air quality status in the fast growing urban centres of Haryana state, India. The samples were collected for total suspended particulate matter (TSPM), respirable suspended particulate matter (PM₁₀), sulfur dioxide (SO₂), and oxides of nitrogen (NO₂) during different seasons from 8 districts of Haryana during January, 1999 to September, 2000. The four types of sampling sites with different anthropogenic activities i.e. residential, sensitive, commercial and industrial were identified in each city. The ambient air concentration of TSPM and PM₁₀ observed was well above the prescribed standards at almost all the sites. The average ambient air concentrations of SO₂ and NO₂ were found below the permissible limits at all the centres. Comparatively higher concentration of SO₂ was observed during winter seasons, which seems to be related with the enhanced combustion of fuel for space heating and relatively stable atmospheric conditions. Air Quality Index (AQI) prepared for these cities shows that residential, sensitive and commercial areas were moderately to severely polluted which is a cause of concern for the residents of these cities. The high levels of TSPM and SO₂ especially in winter are of major health concern because of their synergistic action. The data from Hisar city reveals a significant increase in the total number of hospital visits/admissions of the patients with acute respiratory diseases during winter season when the level of air pollutants was high.     

Treatment of low-strength soluble wastewater using an anaerobic baffled reactor (ABR)

Treatment of low-strength soluble wastewater (COD approximately 500 mg/L) was studied using an eight chambered anaerobic baffled reactor (ABR). At pseudo steady-state (PSS), the average total and soluble COD values (COD(T) and COD(S)) at 8h hydraulic retention time (HRT) were found to be around 50 and 40 mg/L, respectively, while at 10h HRT average COD(T) and COD(S) values were of the order of 47 and 37 mg/L, respectively. COD and BOD (3 day, 27 degrees C) removal averaged more than 90%. Effluent conformed to Indian standards laid down for BOD (less than 30 mg/L). Reactor effluent characteristics exhibited very low values of standard deviation indicating excellent reactor stability at PSS in terms of effluent characteristics. Based on mass balance calculations, more than 60% of raw wastewater COD was estimated to be recovered as CH(4) in the gas phase. Compartment-wise profiles indicated that most of the BOD and COD got reduced in the initial compartments only. Sudden drop in pH (7.8-6.7) and formation of volatile fatty acids (VFA) (53-85 mg/L) were observed in the first compartment due to acidogenesis and acetogenesis. The pH increased and VFA concentration decreased longitudinally down the reactor. Residence time distribution (RTD) studies revealed that the flow pattern in the ABR was neither completely plug-flow nor perfectly mixed. Observations from scanning electron micrographs (SEM) suggest that distinct phase separation takes place in an ABR.     

Assessing the Cost of an Invasive Forest Pathogen: A Case Study with Oak Wilt

Economic assessment of damage caused by invasive alien species provides useful information to consider when determining whether management programs should be established, modified, or discontinued. We estimate the baseline economic damage from an invasive alien pathogen, Ceratocystis fagacearum, a fungus that causes oak wilt, which is a significant disease of oaks (Quercus spp.) in the central United States. We focus on Anoka County, Minnesota, a 1,156 km² mostly urban county in the Minneapolis-Saint Paul metropolitan region. We develop a landscape-level model of oak wilt spread that accounts for underground and overland pathogen transmission. We predict the economic damage of tree mortality from oak wilt spread in the absence of management during the period 2007–2016. Our metric of economic damage is removal cost, which is one component of the total economic loss from tree mortality. We estimate that Anoka County has 5.92 million oak trees and 885 active oak wilt pockets covering 5.47 km² in 2007. The likelihood that landowners remove infected oaks varies by land use and ranges from 86% on developed land to 57% on forest land. Over the next decade, depending on the rates of oak wilt pocket establishment and expansion, 76–266 thousand trees will be infected with discounted removal cost of $18–60 million. Although our predictions of removal costs are substantial, they are lower bounds on the total economic loss from tree mortality because we do not estimate economic losses from reduced services and increased hazards. Our predictions suggest that there are significant economic benefits, in terms of damage reduction, from preventing new pocket establishment or slowing the radial growth of existing pockets.     

Degradation of synthetic dyes using nanoparticles: a mini-review

Environmental Science and Pollution Research - The industrial revolution has marked a strong impact on financial upgradation of several countries, and increase in the industrial establishment...     

Steady-state design of vertical wells for liquids addition at bioreactor landfills

The rate at which liquids can be added to a vertical well, the lateral zone of impact of the well, and the liquids volume needed to wet the waste within the zone of impact of the well are the key inputs needed to design a vertical well system. This paper presents design charts that can be used to estimate these inputs as a function of municipal solid waste properties (porosity, hydraulic conductivity, and anisotropy ratio), well dimensions (radius and screen length), and injection pressure. SEEP/W modeling was conducted to estimate the key design inputs for a range of conditions practically encountered for a vertical well installed in landfilled waste. The flow rate, lateral zone of impact of a well, liquids volume added, and injection pressure were normalized with the waste properties and well dimensions to formulate dimensionless variables. A series of design charts were created to present dimensionless steady-state flow rate, lateral zone of impact, and the dimensionless liquid volume needed to reach a steady-state condition, as a function of dimensionless input variables. By using dimensionless variables formulated for this work, these charts permit the user to estimate the steady-state design variables described above for a wide range of configurations and conditions beyond those simulated without the need for further modeling. The results of the study suggest that the lateral extent of the well can be estimated using Darcy’s equation and assuming saturated unit-gradient vertical flow regime below the well bottom. An example problem is presented to illustrate the use of the design charts. The scenario described in the example problem was also modeled with SEEP/W, and the results were compared with those obtained from the design charts to demonstrate the validity of design charts for scenarios other than those used for the development of the design charts. The methodology presented in this paper should be thought of as a means to provide a set of bounds that an engineer can use along with their judgment in the design of a system for a specific site.     

Decolorization of structurally different synthetic dyes using cobalt(II)/ascorbic acid/hydrogen peroxide system

The cobalt(II)/ascorbic acid/hydrogen peroxide system was used for decolorization of azo, acridine, anthraquinone, thiazine and triphenylmethane dyes. More than 90% decolorization was obtained with all dyes except Remazol Brilliant Blue R (75%). With other transition metals the system was less efficient. With copper, higher concentration and prolonged incubation time was necessary to obtain the same extent of decolorization. The rate of decolorizaton was not affected by pH in the range of 3-9. The reaction is very fast, with more than 90% decolorization being attained within 15 min. The system produces hydroxyl radicals which are responsible for the decolorization.     

Application of SMR to Modeling Watersheds in the Catskill Mountains

Very few hydrological models commonly used in watershed management are appropriate for simulating the saturation excess runoff. The Soil Moisture Routing model (SMR) was developed specifically to predict saturation excess runoff from variable source areas, especially for areas where shallow interflow controls saturation. A recent version of SMR was applied to two rural catchments in the Catskill Mountains to evaluate its ability to simulate the hydrology of these systems. Only readily available meteorological, topographical, and landuse information from published literature and governmental agencies was used. Measured and predicted streamflows showed relatively good agreement; the average Nash–Sutcliffe efficiency for the two watersheds were R ²=72% and R ²=63%. Distributed soil moisture contents and the locations of hydrologically sensitive areas were also predicted well.     

Copper-ligand complex for the decolorization of synthetic dyes

The reaction system containing Cu(II), hydrogen peroxide and D-arabinono-1,4-lactone was found to be effective in the decolorization and reduction of toxicity of azo, thiazine-, triphenylmethane- and anthraquinone-based synthetic dyes. More than 85% decolorization was obtained with 100ppm Acridine Orange, Azure B, Chicago Sky Blue 6B, Crystal Violet, Evans Blue, Poly B-411, Reactive Blue 2, Reactive Blue 5, and Remazol Brilliant Blue R incubated for 24h in the presence of 10mM CuSO(4), 20mM D-arabinono-1,4-lactone and 80 mM H(2)O(2). The rate of decolorization was not affected by pH in the range of 3-9. The rapid decolorization was accompanied by a fast decomposition of H(2)O(2) in the reaction mixture and by a fast production of hydroxyl radicals.     

Oxidative stress in Scenedesmus sp. during short- and long-term exposure to Cu2+ and Zn2+

Algae are exposed to elevated levels of heavy metals in water bodies generally for a long-term, and occasionally for a short-term duration. The present study deals with oxidative stress in Scenedesmus sp., commonly found in nutrient-rich freshwaters, during short- (6h) and long-term (7d) exposure to Cu(2+) and Zn(2+). The cells accumulated almost 2- and 4-times more Cu(2+) and Zn(2+) inside the cells during long-term than during short-term exposure to these metals. But the data on photosynthetic O(2) evolution and cell viability suggest that Scenedesmus sp. experienced lesser metal stress in long-term than in short-term experiment. Although malondialdehyde content was slightly higher in the long-term experiment, the amount produced by one unit intracellular metal was significantly lower than that in the short-term experiment. Superoxide dismutase activity of Scenedesmus sp. was >30% higher during long-term than during short-term exposure to Cu(2+) and Zn(2+). But, catalase and ascorbate peroxidase activities increased only at 2.5 microM Cu(2+) and 25 microM Zn(2+) when oxidative stress was mild, but were inhibited at 10 microM Cu(2+) under intense oxidative stress. Cu(2+) and Zn(2+) reduced glutathione reductase activity and total SH content of Scenedesmus sp. in both the experiments, with greater reduction occurring in the long-term experiment. The depletion of total thiol was positively related with the intracellular level of metals. Thiols might have helped Scenedesmus sp. in overcoming metal-induced oxidative stress, but depletion of thiol pool is known to make cells vulnerable to oxidative stress. The study suggests that antioxidant enzymes play a role only under mild oxidative stress. An increased accumulation of proline seems to be an important strategy for alleviating metal-induced oxidative stress in Scenedesmus sp. The study shows that Scenedesmus sp. could acclimatize during long-term exposure to toxic concentrations of the test metals.