Plasma lipid profiles and risk of cardiovascular disease on occupational exposure in Karimnagar

Occupational exposure is unregulated in developing countries like India, and becoming the most common cause of disease of environmental origin. The present study was aimed to investigate the effects of occupational exposure on plasma lipid profiles, and risk of cardiovascular diseases. A total of 79 human volunteers were included in the study. Control subjects were healthy housewives of Karimnagar, India. Occupationally exposed individuals included different occupational workers like petrol station attendants, battery chargers, drivers, welders, pesticide-exposed workers, painters, and auto mechanics. These subjects were shown to be chronic occupationally-exposed for at least three years, and neither associated with any other chronic pathological conditions like hypertension or diabetes, nor under any medication other than analgesics during the month preceding the study. Subjects with excessive high or low caloric intake were excluded from the study. Total cholesterol (TC), LDL cholesterol, triglycerides (TG), VLDL cholesterol, LDL/HDL cholesterol, and TC/HDL ratio in these subjects were significantly higher than those in control subjects, whereas HDL cholesterol was not markedly affected. Blood pressure (systolic and diastolic), and other anthropometric parameters (body mass index (BMI), body fat index (BFI), body surface area (BSA)) were not significantly different between groups. Data suggest that chronic occupational exposure increases plasma lipid levels and is thereby associated with cardiovascular complications.     

Large‐Scale Fine‐Resolution Hydrological Modeling Using Parameter Regionalization in the Missouri River Basin

This study simulated crop and water yields in the Missouri River Basin (MRB; 1,371,000 km²), one of the largest river basins in the United States, using the Soil and Water Assessment Tool (SWAT) at a fine resolution of 12‐digit Hydrological Unit Codes (HUCs) using the regionalization calibration approach. Very few studies have simulated the entire MRB, and those that have developed were at a coarser resolution of 8‐digit HUCs and were minimally calibrated. The MRB was first divided into three subbasins and was further divided into eleven regions. A “head watershed” was selected in each region and was calibrated for crop and water yields. The parameters from the calibrated head watershed were extrapolated to other subwatersheds in the region to complete comprehensive spatial calibration. The simulated crop yields at the head watersheds were in close agreement with observed crop yields. Spatial validation of the aggregated crop yields resulted in reasonable predictions for all crops except dryland corn in a few regions. Simulated and observed water yields in head watersheds and also in the validation locations were in close agreement in naturalized streams and poor agreement in streams with high groundwater‐surface water interactions and/or reservoirs found upstream of the gauges. Overall, the SWAT model was able to reasonably capture the hydrological and crop growth dynamics occurring in the basin despite some limitations.     

Twenty five years of industrial development: a study of resource use rates and macro-efficiency indicators for five Asian countries

Economic and population growth in Asia over the last three decades has been unprecedented. While conventional economic indicators have been increasing consistently, indicators of resource and environmental quality have been deteriorating, raising questions about the implications of future growth. Economic growth in the future is considered to be contingent on ensuring a more efficient use of natural resources, while simultaneously striving to reduce environmental impacts. We examine time trends of three efficiency indicators; agricultural efficiency, energy efficiency of economic production and carbon efficiency of energy use, for the five most populous countries in Asia in order to assess whether industrial development has lead to increased resource use efficiency and an associated reduction in total resource use and environmental impacts. Our results indicate that agricultural efficiency has decreased in all five countries. Results are mixed for energy and carbon efficiencies. Where increases in energy and carbon efficiency have occurred, they have been completely overwhelmed by absolute increases in energy use and carbon emissions caused by increases in the scale of economic activity. Based on this analysis, we study the potential for further improvements and policy implications for future food supply, energy consumption and carbon emissions in the region.     

Heavy metal content in soil reclaimed from a municipal solid waste landfill

Residues reclaimed from a municipal solid waste (MSW) landfill were characterized for the concentrations of a number of heavy metals. The residue fractions analyzed included a fine fraction (<0.425 mm), an intermediate fraction (>0.425 and <6.3 mm) and a fraction consisting of paper products that could ultimately degrade to a smaller size. The intermediate fraction appeared to be organic in nature, while the fine fraction was more soil-like. In general, the metal concentrations were greatest in the intermediate fraction and lowest in the fine fraction. The effect of sample age on the elemental content was also investigated. The concentrations of several elements were greater in older samples (sample approximately 8 years in age) when compared to newer samples (sample approximately 3 years in age). Limitations associated with the land application of residual soil (composed of the fine and intermediate fractions) were assessed by comparing measured concentrations to regulatory threshold values. In general, most metal concentrations were below regulatory thresholds for use in unrestricted settings. At the concentrations measured, however, several elements might limit reuse options, depending on which regulatory threshold serves as a benchmark. Elevated concentrations of arsenic presented the greatest limitation with respect to common US thresholds while elevated cadmium concentrations presented the greatest limitation when compared to UK thresholds. The source of the arsenic was determined to be the waste, not the cover soil.     

Quantification of Polycyclic Aromatic Hydrocarbons in Tea and Coffee Samples of Mumbai City (India) by High Performance Liquid Chromatography

This paper describes a method for quantification of sixteen polycyclic aromatic hydrocarbons (PAHs) in tea and coffee samples of Mumbai City with the help of reversed phase high performance liquid chromatography with UV-VIS detector. This method is based on liquid–liquid extraction followed by clean up with C-18 cartridge. Concentration of total PAHs in different brands of tea and coffee samples varied from 18.79 to 31.37 μg/L and from 16.47 to 18.24 μg/L, respectively. Mean concentration of total PAHs was 27.56 μg/L in tea and 17.20 μg/L in coffee. Recoveries at different concentration levels were higher than 68% in samples of tea and coffee. Detection limit was found to be low (0.0006 ng) for anthracene and highest (0.174 ng) for naphthalene with relative standard deviation between 0.4%–7%.     

Nanosensors for food quality and safety assessment

Food toxins are produced as defense tools by microorganisms that use nutrients for their growth. Microorganisms thus spoil food, taste and can infect humans, sometimes leading to death. Food adulteration and brand protection are also major issues in the food industry. Here we review the use of nanomaterials for sensing food quality. Nanosensors can detect pathogenic bacteria, food-contaminating toxins, adulterant, vitamins, dyes, fertilizers, pesticides, taste and smell. Food freshness can be monitored using time–temperature and oxygen indicators. Product authenticity and brand protection can be assessed using invisible nanobarcodes. Overall, nanosensors with unique properties are improving food security.     

Steady-state design of horizontal systems for liquids addition at bioreactor landfills

The key parameters for designing a horizontal source (horizontal trenches, infiltration ponds, infiltration galleries or blankets) for steady state are the rate liquids can be added to the source, the lateral and vertical extents of the zone of impact of the source, and the liquids volume needed to wet the waste within the zone of impact at steady state. This paper presents charts that a designer can use to estimate these key parameters as functions of source dimensions, injection pressure, and municipal solid waste properties (porosity, hydraulic conductivity, and anisotropy) for designing a new or analyzing an existing horizontal source system for liquids addition to landfilled waste. SEEP/W was used to model liquids flow from a horizontal source in a range of conditions practically encountered for such systems. The governing equation (Richard’s equation) and the boundary conditions were analyzed to formulate dimensionless variables by normalizing the design parameters (flow rate, injection pressure, the lateral zone of impact, injection pressure, and the added liquids volume) with the waste properties and source dimensions. The simulation results were transformed to the respective dimensionless forms and presented in design charts to estimate the key design parameters as functions of the source dimensions, waste properties, and injection pressure. The presentation of the modeling results in the dimensionless form facilitates their use beyond the conditions modeled. A solved example is presented to demonstrate the use of the design charts. The approach presented in the paper should be considered as approximate and designers should use their judgement and experience when using these charts for designing a horizontal liquids addition system for a specific site.     

Performance improvement and advancement studies of mixed-mode solar thermal dryers: a review

Solar thermal dryers are solar-operated gadgets utilized to dehumidify various products, especially food items and rubber sheets. This article provides detailed design, parametric studies, and an in-depth review of mixed-mode solar dryers (MMSD) with a case study of fish drying near coastal lines. Due to several advantages compared to open sun drying and prominent performance index compared to indirect and direct type solar dryers, mixed-mode solar dryers have large adaptability on the field. Moreover, mixed-mode solar thermal dryers with different augmentations are reviewed, for instance, mixed-mode solar dryers with evacuated tube collectors, phase change materials, ultraviolet rays stabilized housing, and dehumidifiers. The case study of fish drying near the coastal line of Gujarat, India has been carried out to study the present scenario of the drying activities. Hence, the objective of this review is to identify the capable mixed-mode solar dryer with heat recovery systems. Substantial reviews within the article suggest an essential need to implement the hybrid mixed-mode solar dryer cum distiller technology for small-scale enterprises that can simultaneously provide potable water near coastal lines along with drying of fishes from the solar dryer. Furthermore, future research demands such hybrid mixed-mode solar drying systems that strongly fulfill the requirements of local communities near coastal lines involved in fish drying activities.