Topographic factor in the groundwater estimations??a case study in typical semi-arid hard rock environments of Andhra Pradesh

Water table fluctuation (??h) can be used to rapidly assess changes in groundwater storage. But ??h gives acceptable results only if the point of observation is ideally located in the catchment of interest and gives average ??h of the area, a condition which is rarely met. However, if large numbers of observation wells are located within a basin (a catchment) the average ??h can be computed and used. But, a better way is to use points obtained by shallowest water level and deepest water levels to construct a wedge of water table fluctuation across the area of interest; the mean height of this wedge can be assumed to be the mean ??h in the area. And when there is only one observation well, the fact that water table is a subdued replica of the topography, is made use to construct the wedge of water table fluctuation. The results from some randomly selected observations in typical semi-arid, hard rock environment in Andhra Pradesh show that through this approach mean ??h can be effectively used to get change in groundwater storage in area. The mean recharge obtained in this study is in the order of 75 and mean draft is 58?mm/a, while mean recharge and draft obtained by conventional technique are 66 and 54?mm/a, respectively. The most likely specific yield around the middle reaches of a catchment ranges between 0.012 and 0.041 which is within the range given by Groundwater Estimation Committee of India for hard rocks.     

Report: Medical students for monitoring biomedical waste segregation practices--why and how? Experience from a medical college

The cornerstone for an effective biomedical waste (BMW) management is appropriate waste segregation. Improper waste segregation practices can have an adverse impact on public health and increase the cost of treatment. Deficiencies in waste segregation practices can be corrected by continuous monitoring and education. Manpower for monitoring waste segregation in a large teaching hospital is scanty. We utilized the undergraduate medical students as monitors and studied the impact on waste segregation practices. A prospective observational study was carried out from August 2004 to January 2005. For monitoring waste segregation, the different areas of the hospital were divided amongst the II M.B.B.S students. They were provided with an observation sheet wherein the status of waste segregation and overall hygiene was recorded on a scale of 1-5. The impact of this programme was then analysed over the study period. The results indicated that a statistically significant improvement in waste segregation practices occurred in all areas. Thus, a large hospital with a medical college can identify students or a similar group for monitoring waste segregation or other aspects of biomedical waste management. This will improve their understanding of good practice in BMW management in future.     

Detection and extraction of endosulfan by metal nanoparticles

One of the most common pesticides in the developing world, endosulfan, can be detected in ppm levels using gold nanoparticles. Endosulfan adsorbs on the nanoparticle surface and upon interaction for a long time, the nanoparticles precipitate from the solution. Interaction with silver is weak, yet adsorption occurs leading to removal of endosulfan from the solution. A multilayer assembly of gold nanoparticles prepared on a glass substrate shows excellent spectrophotometric response suggesting potential applications.     

DYNAMIC FLUID LOSS DURING VISCOUS FLOW THROUGH A POROUS VERTICAL SLOT1

ABSTRACT. An experimental study of two-dimensional viscous flow through a vertical slot with one highly resistant porous wall was made. The fluid loss area of the porous wall was divided into five sections. The fluid loss rate for the various subareas was measured as a function of the bulk flow rate through the slot and the viscosity of the fluid. Static flow tests through the porous media were also conducted for each fluid viscosity. The results indicate that the experimental data can be correlated in terms of the difference between the static flow rate and the dynamic fluid loss rate as a function of the bulk Reynold's number and the bulk flow rate. Stream function profiles were determined for each experimental run to visualize flow through the length of the slot. An empirical correlation was developed between the superficial entrance width, δ, and the ratio of bulk Reynold's number to the Reynold's number based on flow through the porous wall.     

Experimental investigation of turning AISI 1045 steel using cryogenic carbon dioxide as the cutting fluid

The intensive temperatures in high speed machining not only limit the tool life but also impair the machined surface by inducing tensile residual stresses, microcracks and thermal damage. This problem can be handled largely by reducing the cutting temperature. When the conventional coolant is applied to the cutting zone, it fails to remove the extent of the heat effectively. Hence, a cryogenic coolant is highly recommended for this purpose. In this paper, an attempt has been made to use cryogenic carbon dioxide (CO₂) as the cutting fluid. Experimental investigations are carried out by turning AISI 1045 steel in which the efficiency of cryogenic CO₂ is compared to that of dry and wet machining with respect to cutting temperature, cutting forces, chip disposal and surface roughness. The experimental results show that the application of cryogenic CO₂ as the cutting fluid is an efficient coolant for the turning operation as it reduced the cutting temperature by 5%–22% when compared with conventional machining.It is also observed that the surface finish is improved to an appreciable amount in the finished work piece on the application of cryogenic CO₂. The surface finish is improved by 5%–25% in the cryogenic condition compared with wet machining.     

Acetamide hydrolyzing activity of Bacillus megaterium F-8 with bioremediation potential: Optimization of production and reaction conditions.

Bacillus megaterium F-8 exhibited an intracellular acetamide hydrolyzing activity (AHA) when cultivated in modified nutrient broth with 3 % tryptone, 1.5 % yeast extract, and 0.5 % sodium chloride, at pH 7.2, 45 °C for 24 h. Maximum AHA was recorded in the culture containing 0.1 M of sodium phosphate buffer, (pH 7.5) at 45 °C for 20 min with 0.2 % of acetonitrile and resting cells of B. megaterium F-8 equivalent to 0.2 ml culture broth. This activity was stable up to 55 °C and was completely inactivated at or above 60 °C. Maximum acyl transferase activity (ATA) was recorded in the reaction medium containing 0.1 M of potassium phosphate buffer, (pH 8.0) at 55 °C for 5 min with 0.85 mM of acetamide as acyl donor and hydroxylamine hydrochloride as acyl acceptor and resting cells of B. megaterium F-8 equivalent to 0.94 mg cells (dry weight basis). This activity was stable up to 60 °C and a rapid decline in enzyme activity was recorded above it. Under the optimized conditions, this organism hydrolyzed various nitriles and amides such as propionitrile, propionamide, caprolactam, acetamide, and acrylamide to corresponding acids. Acyl group transfer capability of this organism was used for the production of acetohydroxamic acid. ATA of B. megaterium F-8 showed broad substrate specificity such as for acetamide followed by propionamide, acrylamide, and lactamide. This amide hydrolyzing and amidotransferase activity of B. megaterium F-8 has potential applications in enzymatic synthesis of hydroxamic acids and bioremediation of nitriles and amides contaminated soil and water system.     

Biodegradation of C.I. Acid Red 1 by indigenous bacteria <Emphasis Type="Italic">Stenotrophomonas</Emphasis> sp. BHUSSp X2 isolated from dye contaminated soil

A significant proportion of xenobiotic recalcitrant azo dyes are being released in environment during carpet dyeing. The bacterial strain Stenotrophomonas sp. BHUSSp X2 was isolated from dye contaminated soil of carpet industry, Bhadohi, India. The isolated bacterial strain was identified morphologically, biochemically, and on the basis of 16S rRNA gene sequence. The isolate decolorized 97 % of C.I. Acid Red 1 (Acid RED G) at the concentration of 200 mg/l within 6 h under optimum static conditions (temperature ?35 °C, pH 8, and initial cell concentration 7?×?10⁷ cell/ml). Drastic reduction in dye degradation rate was observed beyond initial dye concentration from 500 mg/l (90 %), and it reaches to 25 % at 1000 mg/l under same set of conditions. The analysis related to decolorization and degradation was done using UV-Vis spectrophotometer, HPLC, and FTIR, whereas the GC-MS technique was utilized for the identification of degradation products. Phytotoxicity analysis revealed that degradation products are less toxic as compared to the original dye.     

Tailor Made Thin Film Composite Membranes: Potentiality Towards Removal of Hydroquinone from Water

The study investigated the use of thin film composite membrane (TFC) as a potential candidate for hydroquinone removal from water. Thin film composite membranes were prepared by polyamide coating on Polysulfone asymmetric membrane. FTIR study was performed to verify the Polysulfone as well as polyamide functionality. TFC membrane was characterized by contact angle, zeta potential, scanning electron microscopy studies. The salt rejection trend was seen from 500 to 1000 mg/L. The membrane is marked by permeability co-efficient B based on solution diffusion studies. The value is 0.98 × 10^?6 m/s for NaCl solution at 1.4 MPa. The separation performance was 88.87% for 5 mg/L hydroquinone at 1.4 MPa. The separation was little bit lowered in acid medium because of the nature of the membrane and feed solute chemistry. The ‘pore swelling’ and ‘salting out’ influenced hydroquinone separation in the presence of NaCl. The hydroquinone separation was 80.63% in 1000 mg/L NaCl solution. In acidic pH, NaCl separation was influenced much more compared to hydroquinone. The separation is influenced by field water matrix.     

Nickel accumulation and its effect on growth,physiological and biochemical parameters in millets and oats

With the boom in industrialization, there is an increase in the level of heavy metals in the soil which drastically affect the growth and development of plants. Nickel is an essential micronutrient for plant growth and development, but elevated level of Ni causes stunted growth, chlorosis, nutrient imbalance, and alterations in the defense mechanism of plants in terms of accumulation of osmolytes or change in enzyme activities like guiacol peroxidase (POD), catalase (CAT), and superoxide dismutase (SOD). Ni-induced toxic response was studied in seedlings of finger millet, pearl millet, and oats in terms of seedling growth, lipid peroxidation, total chlorophyll, proline content, and enzymatic activities. On the basis of germination and growth parameters of the seedling, finger millet was found to be the most tolerant. Nickel accumulation was markedly lower in the shoots as compared to the roots, which was the highest in finger millet and the lowest in shoots of oats. Plants treated with a high concentration of Ni showed significant reduction in chlorophyll and increase in proline content. Considerable difference in level of malondialdehyde (MDA) content and activity of antioxidative enzymes indicates generation of redox imbalance in plants due to Ni-induced stress. Elevated activities of POD and SOD were observed with high concentrations of Ni while CAT activity was found to be reduced. It was observed that finger millet has higher capability to maintain homeostasis by keeping the balance between accumulation and ROS scavenging system than pearl millet and oats. The data provide insight into the physiological and biochemical changes in plants adapted to survive in Ni-rich environment. This study will help in selecting the more suitable crop species to be grown on Ni-rich soils.

     

Enhanced visual detection of pesticides using gold nanoparticles

The presence of parts per billion (ppb) levels of chlorpyrifos (O,O-Diethyl-O-(3,5,6-trichloro-2-pyridyl) phosphorothioate) and malathion (S-1,2-bis(ethoxycarbonyl) ethyl O,O-dimethyl phosphorodithioate), two common pesticides found in the surface waters of developing countries, have been visually detected using gold nanoparticles. Visual detection of the presence of pesticide is possible when the color change occurring by the adsorption of pesticides on gold nanoparticles is enhanced by sodium sulfate. The method presented here is simple and there is no need of sample preparation or preconcentration. The response occurs within seconds and the color change is very clear. The detection is possible if chlorpyrifos and malathion are present up to a concentration of 20 and 100 ppb, respectively. The method shows great potential for on-site pesticide monitoring. The method is also applicable as a qualitative technique for the performance evaluation of various household water filters, which claim pesticide removal.