Nutrient transport through a Vegetative Filter Strip with subsurface drainage

The transport of nutrients and soil sediments in runoff has been recognized as a noteworthy environmental issue. Vegetative Filter Strips (VFS) have been used as one of the best management practices (BMPs) for retaining nutrients and sediments from surface runoff, thus preventing the pollutants from reaching receiving waters. However, the effectiveness of a VFS when combined with a subsurface drainage system has not been investigated previously. This study was undertaken to monitor the retention and transport of nutrients within a VFS that had a subsurface drainage system installed at a depth of 1.2 m below the soil surface. Nutrient concentrations of NO₃-N (Nitrate Nitrogen), PO₄⁻ (Orthophosphorus), and TP (Total Phosphorus) were measured in surface water samples (entering and leaving the VFS), and subsurface outflow. Soil samples were collected and analyzed for plant available Phosphorus (Bray P1) and NO₃-N concentrations. Results showed that PO₄⁻, NO₃-N, and TP concentrations decreased in surface flow through the VFS. Many surface outflow water samples from the VFS showed concentration reductions of as much as 75% for PO₄⁻ and 70% for TP. For subsurface outflow water samples through the drainage system, concentrations of PO₄⁻ and TP decreased but NO₃-N concentrations increased in comparison to concentrations in surface inflow samples. Soil samples that were collected from various depths in the VFS showed a minimal buildup of nutrients in the top soil profile but indicated a gradual buildup of nutrients at the depth of the subsurface drain. Results demonstrate that although a VFS can be very effective in reducing runoff and nutrients from surface flow, the presence of a subsurface drain underneath the VFS may not be environmentally beneficial. Such a combination may increase NO₃-N transport from the VFS, thus invalidating the purpose of the BMP.     

Role of magnetite and humic acid in radionuclide migration in the environment

Sorption of ¹³⁷Cs, ⁹⁰Sr, ¹⁵⁴Eu and ¹⁴¹Ce by magnetite has been studied at varying pH (4 to 11) in the presence and absence of humic acid. The sorption studies have also been carried out at varying ionic strength (0.01 to 0.2 M NaClO₄) and humic acid concentration (2 to 20 mg/L). Percentage sorption of ¹³⁷Cs and ⁹⁰Sr was found to be pH dependent, with the sorption increasing with increasing pH of the suspension. At any pH, the percentage sorption of ⁹⁰Sr was higher than that of ¹³⁷Cs. The results have been explained in terms of the electrostatic interaction between the positively charged metal ions and the surface charge of the magnetite which becomes increasingly negative with increasing pH. On the other hand, ¹⁵⁴Eu and ¹⁴¹Ce were found to be strongly sorbed by the magnetite at all pH values, with the sorption being independent of pH. The strong sorption of trivalent and tetravalent metal ions suggests the role of complexation reactions during sorption, apart from the electrostatic interactions. However, in the case of ¹⁴¹Ce surface precipitation of Ce(III) formed by reduction of Ce(IV) in the presence of magnetite cannot be ruled out. Presence of humic acid (2 mg/L) was found to have negligible effect on sorption of all metal ions.     

Methane production potential of leachate generated from Korean food waste recycling facilities: a lab-scale study

This paper examines the applicability of food waste leachate (FWL) in bioreactor landfills or anaerobic digesters to produce methane as a sustainable solution to the persisting leachate management problem in Korea. Taking into account the climatic conditions in Korea and FWL characteristics, the effect of key parameters, viz., temperature, alkalinity and salinity on methane yield was investigated. The monthly average moisture content and the ratio of volatile solids to total solids of the FWL were found to be 84% and 91%, respectively. The biochemical methane potential experiment under standard digestion conditions showed the methane yield of FWL to be 358 and 478 ml/g VS after 10 and 28 days of digestion, respectively, with an average methane content of 70%. Elemental analysis showed the chemical composition of FWL to be C(13.02)H(23.01)O(5.93)N(1). The highest methane yield of 403 ml/g VS was obtained at 35 degrees C due to the adaptation of seed microorganisms to mesophilic atmosphere, while methane yields at 25, 45 and 55 degrees C were 370, 351 and 275 ml/g VS, respectively, at the end of 20 days. Addition of alkalinity had a favorable effect on the methane yield. Dilution of FWL with salinity of 2g/l NaCl resulted in 561 ml CH(4)/g VS at the end of 30 days. Considering its high biodegradability (82.6%) and methane production potential, anaerobic digestion of FWL in bioreactor landfills or anaerobic digesters with a preferred control of alkalinity and salinity can be considered as a sustainable solution to the present emergent problem.     

Comparative study of measured and modelled number concentrations of nanoparticles in an urban street canyon

This study presents a comparison between measured and modelled particle number concentrations (PNCs) in the 10–300 nm size range at different heights in a canyon. The PNCs were modelled using a simple modelling approach (modified Box model, including vertical variation), an Operational Street Pollution Model (OSPM) and Computational Fluid Dynamics (CFD) code FLUENT. All models disregarded any particle dynamics. CFD simulations have been carried out in a simplified geometry of the selected street canyon. Four different sizes of emission sources have been used in the CFD simulations to assess the effect of source size on mean PNC distributions in the street canyon. The measured PNCs were between a factor of two and three of those from the three models, suggesting that if the model inputs are chosen carefully, even a simplified approach can predict the PNCs as well as more complex models. CFD simulations showed that selection of the source size was critical to determine PNC distributions. A source size scaling the vehicle dimensions was found to better represent the measured PNC profiles in the lowest part of the canyon. The OSPM and Box model produced similar shapes of PNC profile across the entire height of the canyon, showing a well-mixed region up to first ≈2 m and then decreasing PNCs with increased height. The CFD profiles do correctly reproduce the increase from road level to a height of ≈2 m; however, they do not predict the measured PNC decrease higher in the canyon. The PNC differences were largest between idealised (CFD and Box) and operational (OSPM) models at upper sampling heights; these were attributed to weaker exchange of air between street and roof-above in the upper part of the canyon in the CFD calculations. Possible reasons for these discrepancies are given.     

Validation of a QuEChERS-based gas chromatographic method for analysis of pesticide residues in Cassia angustifolia (senna)

A simple multi-residue method based on modified QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe) approach was established for the determination of 17 organochlorine (OC), 15 organophosphorous (OP) and 7 synthetic pyrethroid (SP) pesticides in an economically important medicinal plant of India, Senna (Cassia angustifolia), by gas chromatography coupled to electron capture and flame thermionic detectors (GC/ECD/FTD) and confirmation of residues was done on gas chromatograph coupled with mass spectrometry (GC-MS). The developed method was validated by testing the following parameters: linearity, limit of detection (LOD), limit of quantification (LOQ), matrix effect, accuracy–precision and measurement uncertainty; the validation study clearly demonstrated the suitability of the method for its intended application. All pesticides showed good linearity in the range 0.01–1.0 μg mL^?1 for OCs and OPs and 0.05–2.5 μg mL^?1 for SPs with correlation coefficients higher than 0.98. The method gave good recoveries for most of the pesticides (70–120%) with intra-day and inter-day precision < 20% in most of the cases. The limits of detection varied from 0.003 to 0.03 mg kg^?1, and the LOQs were determined as 0.01-0.049 mg kg^?1. The expanded uncertainties were <30%, which was distinctively less than a maximum default value of ±50%. The proposed method was successfully applied to determine pesticide residues in 12 commercial market samples obtained from different locations in India.     

Microwave synthesis,characterization, and bio-efficacy of novel halogenated Schiff bases

A new series of halogenated Schiff bases was synthesized by the condensation of 5-fluoro-2-hydroxy acetophenone and 3,5-dichloro-2-hydroxy acetophenone with different alkyl amines, namely propyl, pentyl, hexyl, heptyl, octyl, nonyl, dodecyl, tetradecyl, hexadecyl, and octadecyl amines, under microwave irradiation. Newly formed molecules were characterized by Infrared and nuclear magnetic resonance (¹H NMR and ¹³C NMR) spectroscopic techniques. Further, the Schiff bases were screened for antifungal bioassay, and the results showed potential fungicidal activity against two very important plant infecting fungi, viz. Rhizoctonia solani and Sclerotium rolfsii. Among the screened compounds, 2,4-dichloro-2-[1-(propylimino)ethyl]phenol was found to be the most active compound against both R. solani (ED₅₀ 8.02 mg L^?1) and S. rolfsii (ED₅₀ 21.51 mg L^?1) followed by 2,4-dichloro-2-[1-(pentylimino) ethyl]phenol (ED₅₀ 13.02 and 29.57 mg L^?1, respectively). The synthesized compounds were also screened for antioxidant activity by 2,2-diphenyl-1-picrylhydrazyl (DPPH)-free radical scavenging technique. All the compounds showed very low to moderate activity as compared with Gallic acid.     

Natural deep eutectic solvent mediated pretreatment of rice straw: bioanalytical characterization of lignin extract and enzymatic hydrolysis of pretreated biomass residue

The present investigation demonstrated pretreatment of lignocellulosic biomass rice straw using natural deep eutectic solvents (NADESs), and separation of high-quality lignin and holocellulose in a single step. Qualitative analysis of the NADES extract showed that the extracted lignin was of high purity (>90 %), and quantitative analysis showed that nearly 60?±?5 % (w/w) of total lignin was separated from the lignocellulosic biomass. Addition of 5.0 % (v/v) water during pretreatment significantly enhanced the total lignin extraction, and nearly 22?±?3 % more lignin was released from the residual biomass into the NADES extract. X-ray diffraction studies of the untreated and pretreated rice straw biomass showed that the crystallinity index ratio was marginally decreased from 46.4 to 44.3 %, indicating subtle structural alterations in the crystalline and amorphous regions of the cellulosic fractions. Thermogravimetric analysis of the pretreated biomass residue revealed a slightly higher T _dcp (295 °C) compared to the T _dcp (285 °C) of untreated biomass. Among the tested NADES reagents, lactic acid/choline chloride at molar ratio of 5:1 extracted maximum lignin of 68?±?4 mg g^?1 from the rice straw biomass, and subsequent enzymatic hydrolysis of the residual holocellulose enriched biomass showed maximum reducing sugars of 333?±?11 mg g^?1 with a saccharification efficiency of 36.0?±?3.2 % in 24 h at 10 % solids loading.     

Effect of human use,season and habitat on ungulate density in Kanha Tiger Reserve,Madhya Pradesh,India

Conservation practitioners require strata specific, seasonal species densities for habitat management. Herein, we use stratified distance sampling in Kanha Tiger Reserve (KTR) with 200 spatial transects and an effort of 1200 km walk in the year 2013. Analysis was done to access (a) impact of human use and (b) effect of habitat and season on ungulate densities in KTR. While a single detection function for each species was used for estimating density within human-restricted core and multiple use buffer of KTR, species-specific seasonal detections were modelled for each habitat. Ungulate biomass was 4.8 times higher in the core area compared with the buffer zone. The core supported a herbivore density and biomass of 50 ± 4.80/km² and 26,806 ± 2573 kg/km², respectively. Chital were found to be most abundant, having a density of 30.1 ± 4.34/km² and contributing 33 % of the biomass with a habitat preference for grasslands (106 ± 39/km²) in summer and winter. Sambar had highest density (15.4 ± 3.34/km²) in bamboo-mixed habitat, in both seasons. Gaur contributed 39 % of the ungulate biomass and showed a seasonal shift in density from sal forests (9.65 ± 3.55/km²) in summer to miscellaneous forests (8.13 ± 1.94/km²) in winter. Barasingha were restricted to grasslands with similar summer and winter densities of 1.56 ± 0.76/km². Chousingha were rare (0.1 ± 0.04/km²), found mostly in miscellaneous forests and plateau grasslands. Grassland and bamboo-mixed forests supported 58 % of the total ungulate biomass. Management for an optimal habitat mosaic that maintains ungulate diversity, addresses the specific needs of endangered species and maximizes ungulate biomass is recommended.     

Phytoremediation of Copper‐Contaminated Soil Using Helianthus annuus,Brassica nigra,and Lycopersicon esculentum Mill.: A Pot Scale Study

Phytoremediation is an eco‐friendly and cost‐effective technology that uses plants to extract contaminants from the environment or to decrease contaminant toxicity. This article documents a study not only of the effectiveness of copper uptake by Heliantus annuus (common sunflower), Brassica nigra (black mustard), and Lycoperscion esculentum Mill. (a tomato species), but of where, within these plant species, the copper is accumulated—in the roots or in the shoots. This is vital information, for if these particular plants accumulate copper primarily in their roots, then their edible portions will likely be safe to eat, while if they accumulate the copper in their shoots, their harvestable portions would be harmful to living beings.     

Ecological Restoration of Coal Mine‐Degraded Lands in Dry Tropical Climate: What Has Been Done and What Needs to Be Done?

In developed countries, ecological restoration is a widely accepted practice to restore the productivity of degraded coal mine spoils and prevent mine‐degraded sites from acting as sources of pollution. During the past decade, ecologists realized the global need for ecological restoration, and the benefit of restoration is now assessed on the basis of ecosystem services that the restored lands can provide. In this article, the knowledge gap between crude reclamation and ecological restoration is examined, the steps crucial to ecological restoration in tropical conditions are identified, and simple guidelines are given for easy understanding. Restoration issues, such as modification of the forestry restoration approach, reestablishment of biodiversity, removal and reuse of topsoil during progressive and final stages of ecological restoration, drainage, promotion of a plant‐succession‐based approach, use of a grass–legume mixture as an initial colonizer, stabilization of steep slopes, and soil blanketing, are discussed. Those attributes of a degraded ecosystem that are responsible for the success of any restoration project are critically examined, and the opportunities provided by ecological restoration are explored.