排序方式: 共有64条查询结果,搜索用时 15 毫秒
41.
Shalini Singh Prem Dureja Sushil Kumar 《Journal of environmental science and health. Part. B》2013,48(3):337-346
Abstract The degradation of α and β isomers of endosulphan and endosulphan sulphate in four sterilized and non sterilized Indian soils under laboratory conditions was studied. Degradation was found to be more in non‐sterilized as compared to the sterilized soil. The half life of α‐endosulphan, β‐endosulphan and endosulphan sulphate was found to be 136.8, 273 and 301 days in sterilized Alfisol and 55, 256 and 277 days in non‐sterilized Alfisol, respectively. α‐Endosulphan degraded more readily than β‐endosulphan and endosulphan sulphate under both sterilized and non‐sterilized soil conditions. 相似文献
42.
Ruifeng Qi Katherine P. Prem Dedy Ng Morshed A. Rana Geunwoong Yun M. Sam Mannan 《Process Safety and Environmental Protection》2012,90(2):91-100
Process industries have made quite a bit of progress in process safety since the tragic night of December 2, 1984 in Bhopal. Nonetheless, incidents continue to occur on a regular basis due to insufficient understanding of the urgency to identify best practices and drive for process safety improvements in the organization. This paper addresses some of the critical challenges in implementing effective safety programs: (a) failure to learn from past incidents and to capture those lessons into process design, procedures, training, maintenance, and other programs, (b) insufficient attention to leading indicators, and (c) an increase in complexity of process operations and lack of communication. In the presence of these challenges, there is a great need to develop better solutions by utilizing good science based approaches and best practice studies. Potential research areas include, but are not limited to, incident database analysis, reactive chemicals, inherently safer design, combustible dust explosion, facility siting, and the flammability of fuel mixtures and aerosols. In addition, an example was presented on LNG industry safety to illustrate that science-based research is needed to ensure the safe operation and to avoid or mitigate unintended consequences. 相似文献
43.
Prem Kumar Bikkina 《International Journal of Greenhouse Gas Control》2011,5(5):1259-1271
This work presents contact angle measurements for CO2–water–quartz/calcite systems at general sequestration pressure and temperature conditions (200–3000 psig and 77–122 °F). The effect of drop volume, repeated exposure of the substrates to dense water saturated CO2, pressure and temperature on the contact angles is examined. In the 1st measurement cycle, the contact angles for the quartz substrate varied from 46 to 48° and 47 to 46° for gaseous (water saturated) CO2 and liquid (water saturated) CO2 respectively, at 77 °F. For calcite substrate, these values varied from 45 to 48° and 42 to 40°, respectively. Remarkably, this work highlights a characteristic permanent shift in the contact angle data with repeated exposure to dense, water saturated, CO2. The contact angle data trends after repeated exposure to the dense, water saturated CO2 varied from 89 to 91° and 85 to 80° for the quartz substrate for gaseous (water saturated) CO2 and liquid (water saturated) CO2 respectively, at 77 °F. For calcite substrates, these values varied from 60 to 59° and 54 to 48°, respectively. This important observation has serious implications towards the design and safety issues, as a permanent positive contact angle shift indicates lower CO2 retention capabilities of sequestration sites due to a reduction in the capillary pressure. It is further confirmed that the permanent shift in the contact angle is due to surface phenomena. With an increase in temperature (from 77 to 122 °F), the contact angle shift is reduced from about 45° to about 20° for quartz substrates. Other observations in the contact angle data with respect to pressure are in good agreement with the trends reported in the literature. 相似文献
44.
H.J. Pasman S. Jung K. Prem W.J. Rogers X. Yang 《Journal of Loss Prevention in the Process Industries》2009,22(6):769-777
To improve safety one has to know where risks are. For determining risks, hazards have to be identified and representative accident scenarios defined. This needs effort and technique. Man is quite limited in foresight without having experience and lessons from the past. For knowing the risk of an incidental, undesired event both its severity and probability has to be estimated. Then ways to reduce risk become clear. In a process plant risks are many and it is not possible to remove them all. One has to attribute priorities. Intuitive and qualitative methods can do much, but plant complexity may be large and communication on risk may become difficult without formal methodology. Quantitative risk analysis offers much, but has its weaknesses and drawbacks. The required effort is considerable, specialists are needed, and variability in answers is large. Yet, a model built to go along with the life of an installation and updated periodically may be very useful. This paper presents an overview of the demand, problems encountered, possible remedies, and an outlook on useful improvement and extension of risk analysis methodology, including decision making. 相似文献
45.
The risks associated with healthcare waste and its management has gained attention across the world in various events, local and international forums and summits. However, the need for proper healthcare waste management has been gaining recognition slowly due to the substantial disease burdens associated with poor practices, including exposure to infectious agents and toxic substances. Despite the magnitude of the problem, practices, capacities and policies in many countries in dealing with healthcare waste disposal, especially developing nations, is inadequate and requires intensification. This paper looks upon aspects to drive improvements to the existing healthcare waste management situation. The paper places recommendation based on a 12 country study reflecting the current status. The paper does not advocate for any complex technology but calls for changes in mindset of all concerned stakeholders and identifies five important aspects for serious consideration. Understanding the role of governments and healthcare facilities, the paper also outlines three key areas for prioritized action for both parties – budget support, developing policies and legislation and technology and knowledge management. 相似文献
46.
Rapid detection technologies with high sensitivity and selectivity for plant pathogens are essential to prevent disease spread and minimize losses to assure optimal productivity and food security. Traditional laboratory techniques such as microscopy and culture are time-consuming, labour intensive and require complex sample handling. Immunological and molecular techniques have advanced but have some issues related to rapidity, signal strength and instrumentation. The integration of immunological and molecular diagnostics with nanotechnology systems offers an option where all detection steps can be accommodated on a portable miniaturized device for rapid and accurate detection of plant pathogens. The sensitive nature of functionalized nanoparticles can be used to design phytopathogen detection devices with smart sensing capabilities for field use. This review summarizes the current status and future prospects of nanotechnology for detection and diagnosis of plant pathogens. 相似文献
47.
Marko Prem 《Journal of Coastal Conservation》2010,14(4):257-264
After the signing of the ICZM Protocol in the Mediterranean (Madrid, 21 January 2008) its implementation became the main focus
of interest for the future. Several obstacles on the way to implementation are briefly analysed, starting with the ratification
process, the competence for the implementation and the availability of financial resources to put the Protocol requirements
in place. A list of mitigation actions is proposed in order to overcome these obstacles. The ways in which the Centre responsible
for assisting the countries can implement this legal instrument (i.e. PAP/RAC) is elaborated in the second part of the paper.
This includes the preparation of a stocktaking report to allow for defining the starting point for ICZM in the Mediterranean,
elaboration of an explanatory guide of the text of the Protocol, as well as guidelines for the definition of a coastal setback.
Equally important is awareness-raising and training for the implementation of the Protocol. 相似文献
48.
49.
50.
Impurities such as 2,6-dimethylaniline, N-methyl-2,6-dimethylaniline, N-(1-methoxycarbonyl-ethyl)-2,6-dimethylaniline, N-methyl-N-(1-methoxycarbonyl-ethyl)-2,6-dimethylaniline, N-methyl-N-(1-methoxyacetyl)-2,6-dimethylaniline, N-(1-methoxyacetyl)-2,6-dimethylaniline and N-ethyl-N-(methoxyacetyl)-2,6-dimethylaniline present in samples of technical metalaxyl were isolated by column chromatography and identified by nuclear magnetic resonance, mass spectroscopy and comparison with reference compounds. 相似文献