Development and laboratory performance evaluation of a personal cascade impactor

This paper presents the design and laboratory evaluation of a personal cascade impactor. The system is compact, lightweight, and uses a single battery-operated sampling pump. It operates at a flow rate of 5 L/min and consists of four impaction stages, each equipped with slit-shaped acceleration nozzles, and a backup filter. The impactor was calibrated using polydisperse particles. The 50% cut points of the four stages were 9.6, 2.6, 1.0, and 0.5 microm, respectively. The backup filter is placed downstream of the fourth stage and is used to collect the particles with an aerodynamic diameter smaller than 0.5 microm (dp < 0.5 microm). The major feature of this novel sampler is its ability not only to fractionate the particles with an aerodynamic diameter smaller than 10 microm to the various size fractions, but also to collect them onto relatively small polyurethane foam substrates without using adhesives. Although the impaction substrates are not coated with adhesives such as grease or mineral oil, particle bounce and re-entrainment losses were found to be insignificant. Interstage losses of particles smaller than 0.5 microm were less than 10%; for fine particles, less than 5%; and for coarse particles, less than 12%. The pressure drop across the four stages and the backup filter were 0.015 kPa (0.153 cm H2O),0.025 kPa (0.255 cm H2O), 0.274 kPa (2.794 cm H2O), 0.323 kPa (3.294 cm H2O), and 0.370 kPa (3.773 cm H2O), respectively. Particles can be easily recovered from the foam substrates using aqueous extraction.     

Macroinvertebrates as indicators of pollution

Various pollution indicators of stream Ban-Ganga have been identified on the basis of presence/absence/numerical abundance at various stations. They have been categorized as pollution tolerant, facultative and pollution intolerant groups in relation with the water quality at different stations of stream.     

Trends in food production and nitrous oxide emissions from the agriculture sector in India: environmental implications

We studied trends in food production and nitrous oxide emissions from India's agricultural sector between 1961 and 2000. Data from Food and Agricultural Statistics (FAO) have been gathered covering production, consumption, fertilizer use and livestock details. IPCC 1996 revised guidelines were followed in studying the variations in N₂O-N emissions. Results suggest that total N₂O-N emissions (direct, animal waste and indirect sources) increased ~6.1 times from ~0.048 to ~0.294 Tg N₂O-N, over 40 years. Source-wise breakdown of emissions from 1961–2000 indicated that during 1961 most of the N₂O-N inputs were from crop residues (61%) and biological nitrogen fixation (25%), while during 2000 the main sources were synthetic fertilizer (~48%) and crop residues (19%). Direct emissions increased from ~0.031 to ~0.183 Tg. It is estimated that ~3.1% of global N₂O-N emissions comes from India. Trends in food production, primarily cereals (rice, wheat and coarse grains) and pulses, and fertilizer consumption from 1961–2000 suggest that food production (cereals and pulses) increased only 3.7 times, while nitrogenous fertilizer consumption increased ~43 times over this period, leading to extensive release of nitrogen to the atmosphere. From this study, we infer that the challenge for Indian agriculture lies not only in increasing production but also in achieving production stability while minimizing the impact to the environment, through various management and mitigation options.     

Nitrate leaching and nitrogen recovery following application of polyolefin-coated urea to potato

High N fertilizer and irrigation amounts applied to potato (Solanum tuberosum L.) on coarse-textured soils often result in nitrate (NO3) leaching and low recovery of applied fertilizer N. This 3-yr study compared the effects of two rates (140 and 280 kg N ha(-1)) of a single polyolefin-coated urea (PCU) application versus split applications of urea on 'Russet Burbank' potato yield and on NO3 leaching and N recovery efficiency (RE) on a loamy sand. Standard irrigation was applied in all years and excessive irrigation was used in another experiment in the third year. At the recommended rate of 280 kg N ha(-1), NO3 leaching during the growing season was 34 to 49% lower with PCU than three applications of urea. Under standard irrigation in the third year, leaching from five applications of urea (280 kg N ha(-1)) was 38% higher than PCU. Under leaching conditions in the first year (> or = 25 mm drainage water in at least one 24-h period) and excessive irrigation in the third year, PCU at 280 kg N ha(-1) improved total and marketable tuber yields by 12 to 19% compared with three applications of urea. Fertilizer N RE estimated by the difference and 15N isotope methods at the 280 kg N ha(-1) rate was, on average, higher with PCU (mean 50%) than urea (mean 43%). Fertilizer N RE values estimated by the isotope method (mean 51%) were greater than those estimated by the difference method (mean 47%). Results from this study indicate that PCU can reduce leaching and improve N recovery and tuber yield during seasons with high leaching.     

Tillage and nutrient source effects on surface and subsurface water quality at corn planting

This study quantified the effects of tillage (moldboard plowing [MP], ridge tillage [RT]) and nutrient source (manure and commercial fertilizer [urea and triple superphosphate]) on sediment, NH4+ -N, NO3- -N, total P, particulate P, and soluble P losses in surface runoff and subsurface tile drainage from a clay loam soil. Treatment effects were evaluated using simulated rainfall immediately after corn (Zea mays L.) planting, the most vulnerable period for soil erosion and water quality degradation. Sediment, total P, soluble P, and NH4+ -N losses mainly occurred in surface runoff. The NO3- -N losses primarily occurred in subsurface tile drainage. In combined (surface and subsurface) flow, the MP treatment resulted in nearly two times greater sediment loss than RT (P < 0.01). Ridge tillage with urea lost at least 11 times more NH4+ -N than any other treatment (P < 0.01). Ridge tillage with manure also had the most total and soluble P losses of all treatments (P < 0.01). If all water quality parameters were equally important, then moldboard plow with manure would result in least water quality degradation of the combined flow followed by moldboard plow with urea or ridge tillage with urea (equivalent losses) and ridge tillage with manure. Tillage systems that do not incorporate surface residue and amendments appear to be more vulnerable to soluble nutrient losses mainly in surface runoff but also in subsurface drainage (due to macropore flow). Tillage systems that thoroughly mix residue and amendments in surface soil appear to be more prone to sediment and sediment-associated nutrient (particulate P) losses via surface runoff.     

A new method for spectrophotometric determination of benzene in air

A new spectrophotometric method for the determination of benzene in air is described. The method is based upon the nitration of benzene to m-dinitrobenzene and subsequent reduction to m-phenylenediamine. m-Phenylenediamine is determined by diazotization-coupling reaction. α-Naphthol is used as a coupling reagent. Beer's law is obeyed in the range of 10–80 μg of m-dinitribenzene per 25 mL sample. The dye shows a wavelength of maximum absorption at 530 nm. The dye is stable for ～ 30 h. Toluene, the major interferent, can be separated. Beer's law, sensitivity, reproducibility, and other reaction conditions such as time, temperature, and acidity were studied. Formation of stable dye is the main advantage of the method over the butanone method for benzene, in which the colored complex is stable for only 5 min. It is possible to determine traces of benzene (0.05–0.30 μg/mL) by extracting the azo dye in 10 mL iso-amyl alcohol; this also increases the stability of the dye up to 42 h.     

Development, validation, and uncertainty measurement of multi-residue analysis of organochlorine and organophosphorus pesticides using pressurized liquid extraction and dispersive-SPE techniques

Increased water use associated with rapid growth in the Las Vegas Valley has inadvertently led to the creation of unique wetland systems in Southern Nevada with an abundance of biological diversity. Constructed and naturally created wetlands in the Las Vegas Valley watershed were studied to characterize and understand their potential role for improving ecosystem services (i.e., water purification). Nutrient and metal removal was assessed at four sites including a natural urban runoff wetland, a constructed urban runoff wetland, a constructed wastewater wetland, and a natural urban runoff/wastewater wetland. Plant nutrient uptake was dependent on ambient nutrient concentrations in water and sediments of specific wetlands, irrespective of the type of plants present. Phosphorus was mostly concentrated in below-ground plant parts whereas nitrogen was concentrated in above-ground parts. As for metalloids, bulrushes were more efficient than cattails at taking up arsenic and selenium. Averaging all the wetland sites and plant species, total nitrogen, phosphorus, arsenic and selenium removal was 924.2, 61.5, 0.30, and 0.38 kg/ha/year, respectively. Our findings suggest that natural and created wetland systems can improve water quality in the Las Vegas Valley watershed for some common pollutants, however, other measures are still needed to improve water quality below regulatory thresholds.