涪陵页岩气田钻井岩屑资源化利用实践

总结了涪陵页岩气田开发初期钻井岩屑采用固化填埋方式处置存在占地面积大且易产生二次污染隐患等问题,因地制宜地探索钻井岩屑的资源化利用。分析了水基岩屑随钻预处理和油基岩屑热脱附技术,结合钻井岩屑的理化性质,开展了水基岩屑脱水后干渣制路基材料、制砖及水泥窑协同处置,油基岩屑灰渣制混凝土、制砖及水泥窑协同处置的探索和实践,基于环境安全、技术稳定可靠、消纳量大的原则,最终形成了涪陵页岩气田钻井岩屑资源化方案:水基岩屑"随钻预处理、水泥窑协同处置",油基岩屑"热脱附、水泥窑协同处置",实现了钻井岩屑的资源化综合利用。     

塔段连接对多塔悬索桥中间钢桥塔极限承载力的影响∗

以泰州长江公路大桥为工程背景,通过有限元法研究塔段连接对多塔悬索桥中间钢桥塔极限承载力的影响。考虑中间钢桥塔的几何、材料非线性及塔段连接的接触非线性影响,采用ANSYS建立该桥局部塔段为板壳单元的多尺度有限元模型,计算并对比在两种典型加载方式下该模型与杆系有限元模型的钢桥塔极限承载力结果。研究表明:两种加载方式下,桥塔的破坏模式基本一致,表现为材料不连续的上塔柱节段局部形成塑形铰而使桥塔成为机构;多尺度有限元模型与杆系模型获得的荷载位移曲线基本一致,而多尺度模型的极限承载力稍高,且差异在2%以内,可认为塔段连接不是桥塔结构的薄弱点,其对其极限承载力的影响可以忽略。     

准好氧填埋工艺氧气浓度对甲烷与二氧化碳浓度的影响研究

构建了准好氧填埋模拟装置,在其产气相对稳定期间,测定填埋装置内不同点位的ψ(O₂),ψ(CH₄)和ψ(CO₂),并用数学模型对ψ(O₂)与ψ(CH₄)和ψ(CO₂)之间的关系进行拟合.结果表明:随着ψ(O₂)的增加,上层ψ(CH₄)呈对数规律下降,而ψ(CO₂)呈线性规律下降;中层ψ(CH₄)和ψ(CO₂)均呈指数规律下降;下层ψ(CH₄)呈指数规律下降,而ψ(CO₂)先保持在34%左右波动,当ψ(O₂)大于1.8%后呈指数规律下降.上层主要为好氧带,ψ(CH₄)低于ψ(CO₂);中层主要为兼氧带,当ψ(O₂)小于5.8%时ψ(CH₄)高于ψ(CO₂),而当ψ(O₂)大于5.8%时ψ(CH₄)低于ψ(CO₂);下层主要为厌氧带,当ψ(O₂)小于2.8%时ψ(CH₄)高于ψ(CO₂),而当ψ(O₂)大于2.8%时ψ(CH₄)低于ψ(CO₂).      

Policy Windows, Policy Change, and Organizational Learning: Watersheds in the Evolution of Watershed Management

Employing in-depth, elite interviews, this empirical research contributes to understanding the dynamics among policy windows, policy change, and organizational learning. First, although much of the research on agenda setting—how issues attract enough attention that action is taken to address them—has been conducted at the national scale, this work explores the subnational, regional scale. With decentralization, regional-scale environmental decision-making has become increasingly important. Second, this research highlights the role of policy windows and instances of related organizational learning identified by natural resources managers. Having practitioners identify focusing events contrasts with the more typical approach of the researcher identifying a particular focusing event or events to investigate. A focusing event is a sudden, exceptional experience that, because of how it leads to harm or exposes the prospect for great devastation, is perceived as the impetus for policy change.     

Estimating plant-available nitrogen release from manures, composts, and specialty products

Recent adoption of national rules for organic crop production have stimulated greater interest in meeting crop N needs using manures, composts, and other organic materials. This study was designed to provide data to support Extension recommendations for organic amendments. Specifically, our objectives were to (i) measure decomposition and N released from fresh and composted amendments and (ii) evaluate the performance of the model DECOMPOSITION, a relatively simple N mineralization/immobilization model, as a predictor of N availability. Amendment samples were aerobically incubated in moist soil in the laboratory at 22 degrees C for 70 d to determine decomposition and plant-available nitrogen (PAN) (n = 44), and they were applied preplant to a sweet corn crop to determine PAN via fertilizer N equivalency (n = 37). Well-composted materials (n = 14) had a single decomposition rate, averaging 0.003 d(-1). For uncomposted materials, decomposition was rapid (>0.01 d(-1)) for the first 10 to 30 d. The laboratory incubation and the full-season PAN determination in the field gave similar estimates of PAN across amendments. The linear regression equation for lab PAN vs. field PAN had a slope not different from one and a y-intercept not different than zero. Much of the PAN released from amendments was recovered in the first 30 d. Field and laboratory measurements of PAN were strongly related to PAN estimated by DECOMPOSITION (r(2) > 0.7). Modeled PAN values were typically higher than observed PAN, particularly for amendments exhibiting high initial NH(4)-N concentrations or rapid decomposition. Based on our findings, we recommend that guidance publications for manure and compost utilization include short-term (28-d) decomposition and PAN estimates that can be useful to both modelers and growers.     

铬盐废水蒸发系统腐蚀突变与缓蚀工况研究

针对铬盐废水蒸发系统运行过程中的腐蚀问题,采用失重法、pH值检测、扫描电镜(SEM、EDS)和XRD等手段,模拟研究了温度、Cr3+质量浓度对20#碳钢腐蚀速率、腐蚀产物的影响,并从废水pH值和形貌分析角度探索腐蚀速率发生突变的原因.研究表明:废水Cr3+质量浓度在150～180 mg/L范围,碳钢腐蚀速率发生突增,废...     

铜管模拟输配系统中氯胺衰减过程与模拟

研究了氯胺在铜管模拟输配系统中的衰减过程,并利用一级反应动力学模型对氯胺衰减规律进行了模拟;考察了pH、初始氯胺浓度等水质条件与流速等水力条件对氯胺衰减速率的影响.结果表明,pH值是影响氯胺衰减速率与金属铜溶出的重要因素,pH越低氯胺衰减越快;提高氯胺初始浓度可加快氯胺衰减速度,也可增加金属铜的溶出量;流速对氯胺衰减速率的影响不大.此外,衰减动力学过程模拟结果表明,采用一级反应动力学模型可以较好地拟合不同条件下的氯胺衰减规律.从而对于工程中不同条件下消毒剂浓度预测具有重要意义.     

渗滤液回灌对填埋垃圾含水率的影响研究

文章通过模拟实验研究了不同的渗滤液回灌频率、回灌量和回灌速率对压实密度不同的垃圾的含水率的影响。研究表明,由于通道流的存在和影响,渗滤液的产生时间提前于填埋垃圾达到其有效贮水率的时间;渗滤液回灌频率越高、回灌量越大、回灌速率越慢、垃圾体温度越低、垃圾压实密度越高,则填埋垃圾的有效贮水率越大、含水率越高。在实施渗滤液回灌操作时,须综合考虑滤液回灌频率、回灌量、回灌速率、垃圾温度和垃圾压实密度等影响因素。     

烟道气生物脱硫厌氧段影响因素的研究

采用UASB对烟道气生物脱硫厌氧段中的主要影响因素如水力停留时间、进水浓度和温度进行实验研究。分别从亚硫酸根去除效果和硫化物生成情况两方面考查对反应器运行效果的影响。结果表明,水力停留时间为36h时,SRB对SO32-的还原效果良好;进水SO32-浓度范围在500～800mg/L时,SO32-还原率在88%左右;在实验考察的温度范围内,反应温度为33℃时SO32-还原速率和硫化物产生量最大。     

一体化A/O生物膜反应器低温硝化研究

采用自行设计制作的新型一体化A/O生物膜反应器,研究了温度、进水碱度对反应器硝化性能的影响.结果表明,当反应器温度控制在20,15和10℃时,硝化率分别为98%,90%和60%.此时进水COD和TN浓度分别为100～150 mg/L和65～78 mg/L.总氮去除率分别为50%,30%和20%.当反应器温度控制在8℃,进水中不加有机碳源,随着进水碱度的增加,硝化率从72%提高到95%,在低温下取得了良好的硝化效果.当进水碱度为280 mg/L时,反应器各区出现亚硝酸盐积累,亚硝化率达到80%.详细分析了形成亚硝酸盐积累的原因.