嗜麦芽窄食单胞菌对铜镉的吸附特性与离子交换

研究了投菌量、金属浓度和戊二醛浓度对嗜麦芽窄食单胞菌吸附水体中Cu2+和Cd2+特性的影响,分析了重金属生物吸附、NO3-去除与菌体离子释放的关联,从离子吸附、交换、转化与释放的角度探讨了重金属生物吸附机制.结果表明嗜麦芽窄食单胞菌对Cu2+和Cd2+吸附性能良好,0.2 g·L-1干重菌体处理浓度为0.05 mmol·L-1的Cu(NO3)2和Cd(NO3)2溶液120 min后,Cu2+和Cd2+的吸附率分别达96.3%和83.9%.菌体对Cu(NO3)2和Cd(NO3)2溶液的吸附过程存在Cu2+和Cd2+的表面吸附与胞内运输、NO3-胞内积累、NO3-还原为NO2-等行为,而且Cu2+和Cd2+的胞内运输、NO3-积累和还原需要消耗能量,并会促进Cl-、PO43-、SO42-、Na+、NH4+、K+和Ca2+等离子的释放.红外光谱分析表明菌体酰胺基、羟基与羧基均参与了Cu2+和Cd2+的吸附.X-光电子能谱分析显示吸附后Cu2+和Cd2+的价态不发生变化.     

乙醇处理对树脂基纳米水合氧化铁结构及其除砷性能的影响

通过考察乙醇处理对树脂基纳米水合氧化铁(D201-HFO)结构及其除砷性能的影响,评价乙醇处理在复合材料制备中的必要性.结果表明,乙醇处理后负载水合氧化铁(HFO)在D201树脂内的分散性增加,材料对砷的饱和吸附量提高约20%,且复合材料的比表面积、孔容、孔径分别增加了52%、65%、28%;但乙醇处理对复合材料的机械强度和负载HFO的晶型无影响,在pH值、离子竞争对该材料除砷性能的影响趋势方面也无明显作用,对复合材料固定床除砷性能及再生方面也无明显作用.总体而言,乙醇处理对D201-HFO复合材料实际除砷性能影响不大,从技术经济性考虑可以省略.     

基于物质流分析的钾素流动与循环研究

我国钾矿资源匮乏,自给率低,主要的使用和流动过程集中在种植业活动中.本研究利用物质流分析方法对2009年我国种植业生产和消费过程中钾素的流动和循环过程进行了解析.结果表明,农田土壤钾素平均亏损量达到50.4 kg·hm-2,大量钾素由陆生生态系统进入水生生态系统,造成资源流失.伴随降雨径流进入水环境的钾素达231.2万t·a-1,占当年化学钾肥施用量的40.97%.生活污水排放是钾素进入水体的另一主要途径,城市和农村区域的年排放量分别为67.1万t·a-1和54.7万t·a-1,占进入水环境钾素总量的19.00%和15.50%.其中通过城市污水处理厂排放进入地表水环境中钾素为50.5万t·a-1,占城市区域排放总量的75.25%.     

Cost-performance analysis of nutrient removal in a full-scale oxidation ditch process based on kinetic modeling

A full-scale oxidation ditch process for treating sewage was simulated with the ASM2d model and optimized for minimal cost with acceptable performance in terms of ammonium and phosphorus removal. A unified index was introduced by integrating operational costs (aeration energy and sludge production) with effluent violations for performance evaluation. Scenario analysis showed that,in comparison with the baseline (all of the 9 aerators activated), the strategy of activating 5 aerators could save aeration energy significantly with an ammonium violation below 10%. Sludge discharge scenario analysis showed that a sludge discharge flow of 250–300 m3/day (solid retention time (SRT), 13–15 days) was appropriate for the enhancement of phosphorus removal without excessive sludge production. The proposed optimal control strategy was: activating 5 rotating disks operated with a mode of "111100100" ( "1"represents activation and "0" represents inactivation) for aeration and sludge discharge flow of 200 m3/day (SRT, 19 days). Compared with the baseline, this strategy could achieve ammonium violation below 10% and TP violation below 30% with substantial reduction of aeration energy cost (46%) and minimal increment of sludge production (< 2%). This study provides a useful approach for the optimization of process operation and control.     

A pilot-scale study of cryolite precipitation from high fluoride-containing wastewater in a reaction-separation integrated reactor

Fluoride removal by traditional precipitation generates huge amounts of a water-rich sludge with low quality, which has no commercial or industrial value. The present study evaluated the feasibility of recovering fluoride as low water content cryolite from industrial fluoride-containing wastewater. A novel pilot-scale reaction-separation integrated reactor was designed. The results showed that the seed retention time in the reactor was prolonged to strengthen the induced crystallization process. The particle size of cryolite increased with increasing seed retention time, which decreased the water content. The recovery rate of cryolite was above 75% under an influent fluoride concentration of 3500 mg/L, a reaction temperature of 50℃, and an influent flow of 40 L/hr. The cryolite products that precipitated from the reactor were small in volume, large in particle size, low in water content, high in crystal purity, and recyclable.     

石化行业催化裂化装置环境监理要点研究——以某企业350万吨/年催化裂化装置为例

催化裂化是石油炼厂从重质油生产汽油的主要过程之一,是石化炼油中的核心部分,也是环境监理关注的重点.以某石化公司油品质量升级改造项目为例,对新建350万吨/年催化裂化装置的环境监理开展深入研究,为国内深入开展类似项目的环境监理工作、出台环境监理技术规范提供有益的参考.     

管输企业安全生产信息化现状与对策

阐述了安全生产信息化建设对安全生产带来的重大变革,以及存在的信息化环境、技术、质量等方面的信息不对称,对产生失衡的原因进行分析,提出合理的解决方案。     

石化企业环境因素识别与评价

介绍了环境因素识别与评价的基本步骤和内容,探讨了重要环境因素确定、更新方法及控制措施。     

中性点不接地电网中单相接地故障的分析及处理

阐述了中性点不接地电网中单相接地的特点,并分析了用绝缘监视装置和小电流接地选线装置查找故障的利弊,以及目前小电流接地选线技术可靠性差的原因.     

宿州市街尘重金属的粒径分布特征及污染评价

在宿州市不同功能区采集23个街尘样品,利用X-Ray荧光光谱法测定了样品中重金属Cu、Zn、Pb、Mn、Cr、V的含量,分析了街尘重金属的粒径分布特征,并利用地累积指数法对其污染状况进行了评价。结果表明:(1)宿州市街尘中细颗粒质量比重较高,在<75μm、75～150μm、150～250μm、250～500μm四个粒径段的街尘质量比例分别为39.73%、27.52%、22.57%和10.18%;(2)街尘中各重金属元素的含量最大值均出现在<75μm和75～150μm粒径范围内,说明重金属易在细颗粒中富集;(3)各重金属元素在<75μm粒径范围内的赋存比例均高于其他3个粒径级别,达40%左右;(4)随着街尘粒径的由粗到细,其重金属污染程度从无污染到轻度污染,各重金属元素的污染程度依次为:Zn>Pb>Cr>Cu>V>Mn。