云南宁洱6.4级地震灾区范围的快速判断

采用云南175个历史强震的等震线图、云南数字等震线模型和云南1：400万活动断裂资料,对常规正圆法灾区范围量化与数字等震线模型灾区范围量化得到的云南宁洱6．4级地震灾区范围进行了对比,分析了地震等震线长轴方向与活动断裂的关系。结果表明,灾害地震的灾区范围用等震线模型来量化比常规用正圆来量化更加符合地震的客观情况。     

地理空间信息网格安全问题研究

计算机网络足地理空间信息网格的载体,二者之间有着密切的联系,其关联性主要表现在互连互通、基于协议、交互接口和虚拟组织几个方面.计算机网络遇到的安全威胁,地理空间信息网格也同样会遇到.此外,地理空间信息网格还要面对自身特征带来的诸如攻击核心设施、导致整体瘫痪,或破坏局部计算等各种安全威胁.针对这些问题,基于用户、通信网络、应用程序和网格资源四个环节,研究设计了地理空间信息网格安全体系结构,并论述了各模块的功能和相互之间的关系,以及整体协同运行程序.     

Characteristics of real-world vehicular emissions in Chinese cities

On-board emission measurements were performed on 49 light-duty gasoline vehicles in seven cities of China. Vehicle-specific power mode distribution and emission characteristics were analyzed based on the data collected. The results of our study show that there were significant differences in different types of roads. The emission factors and fuel consumption rates on arterial roads and residential roads were approximately 1.4-2 times those on freeways. The carbon monoxide, hydrocarbon, and nitrogen oxides emission factors of Euro II vehicles were on average 86.2, 88.2, and 64.5% lower than those of carburetor vehicles, respectively. The new vehicle emission standards implemented in China had played an important role in reducing individual vehicle emissions. More comprehensive measures need to be considered to reduce the total amount of emissions from vehicles.     

Effective removal of coordinated copper from wastewater using a new dithiocarbamate-type supramolecular heavy metal precipitant

A new dithiocarbamate-type heavy metal precipitant, sodium 1,3,5-hexahydrotriazinedithiocarbamate (HTDC), was prepared and used to remove coordinated copper from wastewater. In the reported dithiocarbamate-type precipitants, HTDC possesses the highest percentage of the effective functional groups. It could effectively precipitate copper to less than 0.5 mg l⁻¹ from both synthetic and actual industrial wastewater containing CuEDTA in the range of pH 3–9. UV–vis spectral investigation and elemental analysis suggested that the precipitate was a kind of coordination supramolecular compound, [Cu₃(HTDC)₂]_n. The toxicity characteristic leaching procedure (TCLP) and semi-dynamic leaching test (SDLT) indicated that the supramolecular precipitate was non-hazardous and stable in weak acid and alkaline conditions. Tests of an anion exchange resin D231 provided a clue to simultaneously remove excess HTDC and residual CuEDTA in practical process of wastewater treatment.     

2016—2018年北京城市湿地遥感监测分析

为全面了解北京城市湿地的现状及近年来的动态变化情况,利用高分辨率卫星遥感数据,综合运用GIS技术与景观生态学方法,定量分析了北京市6环内的湿地空间格局。结果表明,北京6环内城市湿地以河流湿地和湖库湿地为主;2016—2018年间湿地面积有所下降,2年间减少了126.58 hm²,主要转化为草地,少量转化为建设用地和林地;由于城市外围的开发建设强度较大,5-6环湿地被侵占面积相对较大,而4环内湿地面积的波动较小;2016—2018年,北京城市湿地的斑块密度增加,平均斑块面积有所减小,表明湿地斑块随时间变化呈破碎化的趋势,且从城市中心向城市边缘,湿地斑块的破碎化程度增强。     

天然气开采废水处理技术综述

针对天然气开采废水量大、矿化度高、杂质含量多、处理难度大的问题,从预处理技术、COD处理技术、氨氮处理技术、脱盐处理到深度处理技术等对各种处理技术进行分析和对比,说明了各种方法的特点和适用情况等。根据对各种方法的特点总结,结合不同废水的水质特点,提出适宜的组合处理方法,并探讨了综合处理技术在部分地区的工程化应用情况。     

g-C_3N_4/C@Bi_2MoO_6复合光催化剂的制备及其光催化活性

通过水热合成法和液相沉积法制备g-C_3N_4/C@Bi_2MoO_6复合光催化剂,并采用X射线衍射、扫描电子显微镜、氮气吸脱附、紫外-可见漫反射等技术对其进行表征。研究了可见光下g-C_3N_4/C@Bi_2MoO_6催化降解罗丹明B(Rh B)的影响因素,并对其光催化反应机理进行初步探讨。实验结果表明:g-C_3N_4掺杂量为60%(w)时g-C_3N_4/C@Bi_2MoO_6的光催化活性最高;在60%g-C_3N_4/C@Bi_2MoO_6的投加量为1.00 g/L、初始Rh B质量浓度为2.50 mg/L、可见光照射150 min的条件下,Rh B的降解率达到97.90%;在g-C_3N_4/C@Bi_2MoO_6光催化降解体系中,h~+和·O_2~-是主要活性物种。     

Effects of Compounded Curing Agents on Properties and Performance of Urea Formaldehyde Resin

The effects of three compounded curing agents on the properties and performance of the urea-formaldehyde (UF) resin were investigated in this study. The compounded curing agents were prepared by mixing ammonium chloride with hexamethylenetetramine, citric acid, and oxalic acid respectively at a ratio of 1:1, named N-H, N–CA, and N–OA, respectively. The curing process, crystallinity, and physical properties were measured, and the three-ply plywood was fabricated to measure its prepress strength, wet shear strength, and formaldehyde emission. Results showed that the compounded curing agents N–CA and N–OA enhanced the initial viscosity, crosslinking density and thermal stability of UF resin. Additionally, the prepress strength of the plywood bonded by UF resin with N–CA and N–OA increased by 82 and 111% respectively compared to the UF resin with NH₄Cl, and the wet shear strength increased by 14 and 16%, the formaldehyde emission decreased by 19 and 42% respectively. However, owing to the short pot-life of these curing agent limited their storage time, the curing agents N–CA and N–OA should be applied to fabricate plywood in winter for obtaining a better bond strength and a lower formaldehyde emission. While the UF resin with N–HT showed a suitable pot-life, so it could be applied to fabricate plywood in summer for long time storage and avoiding procuring problem.     

Structure optimization and annual performance analysis of the lens-walled compound parabolic concentrator

The primary lens-walled compound parabolic concentrator (lens-walled CPC) has a significant advantage of a larger half acceptance angle as a static solar concentrator, but it also has a drawback of a low optical efficiency. In order to overcome this drawback, in this article, series of structure parameters were investigated and compared to further improve the optical efficiency within the half acceptance angle combined with the material properties. The average optical efficiencies of the improved lens-walled CPCs could achieve more than 82% within the half acceptance angle of 35?. Experiments were adopted to verify the credibility and validity of the simulation. Moreover, annual performance of the lens-walled CPCs comparison with that of the mirror CPC for Nottingham was analyzed. Results show that the improved lens-walled CPC has a higher optical performance for actual building application.