Dust Storms are an Indication of an Unhealthy Environment in East Asia

Dust storms frequently occur in Mongolia and in northern China. Each year there are 30 to 120 dusty days in source regions of Mongolia and 14–20 dusty days on the Korean Peninsula. Intense sand storms and associated dust falls produce environmental impacts in East Asia. This paper discusses the environmental degradation in Mongolia and the social, economic and atmospheric impacts of dust storms in the sink area. The impact of dust storms on environmental compartments as well as their direct and indirect consequences to basic resources like water and energy demand and supply is explained. Governments are encouraged to take appropriate action in specified regions. For monitoring dust storms there is a need for international cooperation to combat growing environmental and human security concerns.     

基于遗传-神经网络的电网流域面雨量预报方法研究

以重点水力发电厂和大中型水库为主要考量,并兼顾地形地貌和中小河流的分布特征,将广西划分为23个电网流域,研究了基于非线性的神经网络电网流域面雨量预报方法。以5-6月龙滩近库区、龙江流域等6个电网流域为例,利用遗传算法优化BP神经网络的连接权和网络结构,建立了各电网流域的遗传-神经网络电网流域面雨量预报模型。对独立样本的预报结果表明,基于遗传-神经网络的电网流域面雨量预报模型的预报能力要优于传统的逐步回归预报模型,也明显优于日本、德国数值模式预报产品所换算成的电网流域面雨量预报,并与气象部门同期制作的综合面雨量预报产品能力相当,因而,遗传-神经网络面雨量集合预报模型有较好的业务应用前景。     

Melting and stone production using MSW incinerated ash

Most of the municipal solid waste (MSW) in Japan is incinerated and the generated ash is landfilled. However, environmental pollution problems have increased and Japan has decreased final disposal sites for landfills. With the application of a melting system, the volume of incinerated ash can be reduced and the effective use of melted slag is being developed for use in civil engineering works. However, the low strength of melted slag as a vitreous structure has limited its effective use. As a solution for this deficiency, a technology to crystallize melted slag into higher strength produced stones was developed. With the joint cooperation of Chiba Prefecture and Kamagaya City, a demonstration plant for melting and stone production with a capacity of 4.8 tons of incinerator ash per day was constructed. The demonstration test was conducted from May 1998 to June 1999 with satisfactory results stated below. Long-term stable operation and performance of the plant have been confirmed and effective applications of produced stones have been demonstrated on a commercial scale. The results are as follows. 1. A stable, continuous operation and good quality produced stones have been confirmed by treating more than 750 tons of MSW incinerated ash. 2. More than 99.9% of dioxins contained in the incinerated ash were decomposed, and the concentration of dioxins in produced stones were less than the detection limit set by Japanese environmental standards. 3. Leaching values of hazardous heavy metals of produced stones sufficiently met the environmental standard on soil pollution of the Environment Agency with superior leaching behavior for the vitreous slag, thus confirming their safe applications. 4. The effective application of produced stones for aggregate was tested based on Japanese Industrial Standards and every figure of test results met the Japanese standard values. The use of produced stones as raw materials for permeable pavement blocks has been confirmed in commercial construction for a park in Chiba Prefecture. Asphalt use was also demonstrated by paving a commercial roadway in Kamagaya City.     

Recovery of zinc and lead from fly ash from ash-melting and gasification-melting processes of MSW--comparison and applicability of chemical leaching methods

Fly ash generated from MSW ash-melting and gasification-melting plants, known as Melting Furnace Fly Ash (MFA), contains considerable amounts of heavy metals such as Pb and Zn. These metals can be recovered using a smelting furnace after "pre-treatment" for removal of unnecessary elements such as Cl, Sn and Si. Chemical methods have been studied for pretreatment in the past. However, they have been discussed only with regard to treatment cost and the concentration of Pb and Zn recovered, but neither applicability to various types of MFA nor the environmental impact have been considered. In this study, acid, alkaline and ammonia/chloride leaching methods were compared from the standpoints of: (1) applicability to MFA, (2) concentration of Pb and Zn recovered, (3) treatment cost, and (4) environmental impact. Twenty-three samples of MFAs were collected and classified into 4 types based on element contents. A Pb and Zn recovery experiment was conducted for the representative MFA of those types. The results showed: (1) MFA from gasification-melting plants cannot be treated by chemical methods; (2) the other MFA can be treated to an acceptable quality by existing smelting furnaces; (3) only MFA from electric resistance ash-melting plants can be treated easily by the water washing method; and (4) alkaline and ammonia/chloride leaching methods were more effective than acid leaching.     

2×300 MW机组石灰石-石膏烟气脱硫吸收塔设计

选用石灰石-石膏工艺对山西某电厂2×300MW机组进行烟气脱硫,对其核心设备吸收塔的本体进行设计计算,并对其中的设备进行了选型.     

Degradation of PVC Containing Mixtures in the Presence of HCl Fixators

Degradation of a model polymer mixture (PVC/PS/PE) and a waste polymer mixture in the presence of HCl fixators (Red Mud, precipitated CaCO₃ and dolamite) was studied using thermal gravimetric analysis (TGA) and a cycled-spheres-reactor. The experiments in cycled-spheres reactor model were performed by stepwise pyrolysis. Liquid products and HCl from each step were collected separately. For the model polymer mixture, the precipitated CaCO₃ showed the best effect on the fixation of evolved HCl and the reduction of chlorine content in the liquid products whereas RM yielded the best result for the waste polymer mixture. In addition, using HCl fixator also affected the degradation of both types of polymer mixture, leading to the formation of more gaseous and less residue.     

以雨水为核心的城市水环境构建思路

在研究国内外利用雨水构建城市水环境的文献基础上,得出城市水环境构建要空中层、地表层和地下层综合构建三位一体的指导思想,以雨水为核心的城市水环境构建的思路是：从易到难,分步骤进行构建。     

高含水油泥调质脱稳用剂

高含水油泥主要来自于页岩气田、油气田和炼厂的污水处理场（站）,含水率一般高达90%以上,成分复杂、乳化严重,是性质稳定的多相体系。破胶脱稳是高含水油泥处理处置与利用的前提,也是减量化的瓶颈,其核心是调质脱稳用剂的优选。介绍了高含水油泥的性质及调质脱稳的原理和方法,阐述了高含水油泥调质脱稳用剂的研究及应用现状,总结了助滤剂、氧化剂、电解质、破乳剂、絮凝剂和微乳化剂等常用药剂的调质机理、适应范围、研究实例和优缺点,并提出了调质脱稳用剂未来的发展方向。     

安徽省区域经济差异的时空特征分析

在建立安徽省市域经济差异衡量指标体系的基础上，以安徽省17个地市为研究单元，采用层次分析法和ArcView GIS技术，探讨了安徽省市域经济差异变化的时间特征、空间格局及其发展变化过程，并对当前安徽省各市经济发展水平进行了分类。     

Influence of sugarcane bagasse-derived biochar application on nitrate leaching in calcaric dark red soil

Application of biochar has been suggested to improve water- and fertilizer-retaining capacity of agricultural soil. The objective of this study was to evaluate the effects of bagasse charcoal (sugarcane [ L.] bagasse-derived biochar) on nitrate (NO) leaching from Shimajiri Maji soil, which has low water- and fertilizer-retaining capacity. The nitrate adsorption properties of bagasse charcoal formed at five pyrolysis temperatures (400-800° C) were investigated to select the most suitable bagasse charcoal for NO adsorption. Nitrate was able to adsorb onto the bagasse charcoal formed at pyrolysis temperatures of 700 to 800° C. Nitrate adsorption by bagasse charcoal (formed at 800° C) that passed through a 2-mm sieve was in a state of nonequilibrium even at 20 h after the addition of 20 mg N L KNO solution. Measurements suggested that the saturated and unsaturated hydraulic conductivity of bagasse charcoal (800° C)-amended soils are affected by changes in soil tortuosity and porosity and the presence of meso- and micropores in the bagasse charcoal, which did not contribute to soil water transfer. In NO leaching studies using bagasse charcoal (800° C)-amended soils with different charcoal contents (0-10% [w/w]), the maximum concentration of NO in effluents from bagasse charcoal-amended soil columns was approximately 5% less than that from a nonamended soil column because of NO adsorption by bagasse charcoal (800° C). We conclude that application of bagasse charcoal (800°C) to the soil will increase the residence time of NO in the root zone of crops and provide greater opportunity for crops to absorb NO.