Design of single vertical tube falling-film evaporation basing on experiment

An experimental study for fluid hydrodynamic characteristics in thin water films falling down the outside of a vertical tube was performed with the analysis of several factors about the uniformity and stability of the film. Liquid evaporation is of major interest for many fields in process engineering. One of these is chemical process engineering, where evaporation of liquids and generation of super heated steam is mandatory for numerous processes. Generally, this is performed by the use of classical pool boiling and evaporation process equipment, providing relatively limited performance. The performance of the film distributor will affect the production capacity and service life of the evaporator. In this publication a novel falling-film distributor which is used annular gap and inlet tube rotated tangentially 270° to guarantee the film uniformity is presented. Experimental data suggested that there is optimum annular gap distance is between 1.5 and 2.0 mm and the spray density should be controlled between 250 and 700 kg m⁻¹ h⁻¹. Several suggestions for evaporator design are proposed.     

臭氧-活性炭工艺在炼化循环排污水处理中的应用＊

针对炼化企业循环排污水中有机污染物浓度不能满足脱盐处理工艺进水水质要求的问题,开展了臭氧氧化-活性炭吸附工艺去除循环排污水中有机污染物的研究。通过对两种处理工艺进行不同组合的实验结果得知:当反应时间控制在最佳值,臭氧氧化和活性炭吸附单独处理循环排污水时,COD去除率分别约为27%和20%,处理效率偏低;当两种工艺组合后,在臭氧浓度为12 mg/L、氧化时间20 min、吸附时间为10 min时,COD去除率则达到52%,组合工艺协同作用效果明显。     

加强高校网络管理工作的思考

在深入分析网络管理现状的基础上,从高校管理、服务的实际情况出发,通过广泛的调研、分析,全面阐述了在高校加强网络建设、网络管理和构建网络安全的必要性和重要性。     

Phosphorus runoff from sewage sludge applied to different slopes of lateritic soil

Sewage sludge (SS) applied to sloping fields at rates that exceed annual forest nutrient requirements can be a source of phosphorus (P) in runoff. This study investigates the effects of different slopes (18, 27, 36, and 45%) on P in runoff from plots amended with SS (120 Mg ha). Lateritic soil (pH 5.2) was exposed to five simulated rainfalls (90 mm h) on outdoor plots. When sludge was broadcast and mixed with surface soils, the concentrations and loss in runoff of total P in the mixed sample (MTP), total P in the settled sample (STP), total particulate P (TPP), total suspended P (TSP), and total dissolved P (TDP) were highest at 1 or 18 d after application. Initially, pollution risks to surface waters generally increased to different degrees with steeper slopes, and then diminished gradually with dwindling differences between the slopes. The runoff losses coefficient of MTP increased in the order 36 > 45 > 27 > 18%. The initial event (1 and 18 d) accounted for 67.0 to 83.6% of total runoff P losses. Particulate fraction were dominant carriers for P losses, while with the lower slopes there was higher content of P per unit particulate fraction in runoff. Phosphorus losses were greatly affected by the interaction of sludge-soil-runoff and the modification of soil properties induced by sludge amendment. It is recommended to choose lower slopes (<27%) to reduce risk of P losses. Thus, the risk of application sludge to sloping fields in acid soils should be studied further in the field under a wider diversity of conditions.     

Occurrence of selected antibiotics in Jiulongjiang River in various seasons, South China

The concentrations of six sulfonamides (SAs) and three tetracyclines (TCs) were investigated in Jiulongjiang River during the low water season and the high water season. They were monitored in both surface water and sediment. Total concentrations of all these antibiotics varied from 31 to 25,771 ng g(-1) in sediment samples. In water they ranged from 60 to 2607 ng L(-1) during the low water season and from ND (not detected) to 134 ng L(-1) during the high water season. At the sites nearby breeding farms, chlorotetracycline was found to have the highest concentration of 1036 ng L(-1) in water and 14,666 ng g(-1) in sediments. According to the published data, the concentrations of sulfamethazine, sulfameter and TCs at these sites were higher than that in most rivers. The concentrations during the low water season were tens to hundreds of times higher than that in the high water season. The lower concentrations of TCs in the high water season might result from both dilution and photo-degradation, while dilution and bio-degradation might lead to the lower concentrations of SAs. However, further study is needed to clarify the specific reasons. Concerning the relationship between sediment and water samples, the pseudo-partitioning values of TCs were much higher than SAs. It indicates that the TCs are prone to accumulate in the sediment.     

Spatial distribution, electron microscopy analysis of titanium and its correlation to heavy metals: occurrence and sources of titanium nanomaterials in surface sediments from Xiamen Bay, China

Titanium nanomaterials are likely to sink into sediments in substantial quantities due to their wide use in a number of applications for decades. To assess the potential environmental consequences, a better understanding is required of the occurrence and sources of titanium (Ti) nanomaterials in sediments. In this research, we provide the first report of the Ti concentrations and the morphology and composition of Ti-based solids in surface sediments from Xiamen Bay, China. Results indicated that the anthropogenic Ti concentrations in the surface sediments from Xiamen Bay reached approximately 2.74 g kg(-1). Ti nanomaterials could be found in sediments with elevated Ti concentrations, which were often aggregated to a few hundred nanometers (<300 nm) and were composed of several spherical particles, less than 50 nm in size, that were made solely of TiO(x). However, Ti particles (approx. 300-700 nm) could be also found in sediments with lower Ti concentrations, which were presumably components of the natural clay mineral kaolinite. Ti nanomaterials could be easily distributed in sediments associated with elevated levels of organic matter and preferentially attach to those sediments with elevated fine fractions. As a sentinel, or tracer, for other nanomaterials, the field-scale investigation of Ti nanomaterials would contribute to increasing our knowledge on the behavior of engineered nanomaterials in an aquatic environment.     

Adsorption and desorption characteristics of diphenylarsenicals in two contrasting soils

Diphenylarsinic acid(DPAA) is formed during the leakage of aromatic arsenic chemical weapons in soils,is persistent in nature,and results in arsenic contamination in the field.The adsorption and desorption characteristics of DPAA were investigated in two typical Chinese soils,an Acrisol(a variable-charge soil) and a Phaeozem(a constant-charge soil).Their thermodynamics and some of the factors influencing them(i.e.,initial pH value,ionic strength and phosphate) were also evaluated using the batch method in order to understand the environmental fate of DPAA in soils.The results indicate that Acrisol had a stronger adsorption capacity for DPAA than Phaeozem.Soil DPAA adsorption was a spontaneous and endothermic process and the amount of DPAA adsorbed was affected significantly by variation in soil pH and phosphate.In contrast,soil organic matter and ionic strength had no significant effect on adsorption.This suggests that DPAA adsorption may be due to specific adsorption on soil mineral surfaces.Therefore,monitoring the fate of DPAA in soils is recommended in areas contaminated by leakage from chemical weapons.     

Characterization of cake layer structure on the microfiltration membrane permeability by iron pre-coagulation

A cake layer is formed by coagulation aggregates under certain transmembrane pressure in the coagulation-microfiltration (MF) process. The characteristics of humic acid aggregates coagulated by different iron-based coagulants, such as charge, size, fractal dimension and compressibility, have an effect on the cake layer structure. At the optimum iron dose of 0.6 to 0.8 mmol/L for ferric chloride (FC) and polymer ferric sulfate (PFS) pre-coagulation, at the point of charge neutralization for near zero zeta potential, the aggregate particles produced possess the greatest size and highest fractal dimension, which contributes to the cake layer being most loose with high porosity and low compressibility. Thus the membrane filterability is better. At a low or high iron dose of FC and PFS, a high negative or positive zeta potential with high charge repulsion results in so many small aggregate particles and low fractal dimension that the cake layer is compact with low porosity and high compressibility. Therefore the membrane fouling is accelerated and MF permeability becomes worse. The variation of cake layer structure as measured by scanning electric microscopy corresponds with the fact that the smaller the coagulation flocs size and fractal dimension are, the lower the porosity and the tighter the cake layer conformation. This also explains the MF membrane flux variation visually and accurately.     

Simultaneous determination of brominated phenols in soils

Brominated phenols （BPs）, a widely used group of emerging flame retardants, are important environmental contaminants and exhibit endocrine disrupting potential. Method for simultaneous determination of tetrabromobisphenol A （TBBPA）, tribromophenol （TBP）, dibromophenols （DBPs） and monobromophenols （MBPs） in soils using gas chromatography-mass spectrometry analysis （GC/MS） was successfully developed. Cleanup methods for soil extracts including several solid-phase extraction cartridges and different elution solvents were compared and optimized. Florisil cartridge with dichloromethane as the elution reagent was selected for sample cleanup owing to its high and reproducible recoveries of the target analytes in soils. Derivatization conditions were tested and the optimal conditions were obtained with 20 μL silylation reagent at room temperature. The chromatographic separation was optimized with different columns and DB-XLB column was selected for its excellent separation of the analytes. The limits of detection for the target compounds were from 0.04 to 0.19 ng/g. Mean recoveries of the compounds from spiked soils exceeded 84% with a good reproducibility, excepting that the recovery of 2-bromophenol was relatively poor （lower than 55%） due to its instability. The developed method was applied to the determination of the BPs in the soils collected from e-waste sites. The contents of BPs in the soils were at ng/g levels with TBBPA and TBP the most frequently detected. To our knowledge, this is the first report for the simultaneous determination of TBBPA, TBP, DBPs and MBPs in soils.     

Smog,media attention,and corporate social responsibility—empirical evidence from Chinese polluting listed companies

Environmental Science and Pollution Research - In recent years, the frequent occurrence of smog in Chinese cities has prompted great changes in the policy environment faced by enterprises. In this...