Acid Deposition in the Tuscan Appennines During the Dry Period 1988-89

The typical parameters of acid precipitation are evaluated in the forest of Vallombrosa (Tuscan Appennines) during the dry period 1988-89. Individual rain events (dry and wet deposition) were sampled in a clearing of the forest and below the canopy of an evergreen tree as well as a deciduous broadleaf tree.

In atmospheric precipitation the pH values usually vary around 4.4, with neutralization in the hot season due to calcareous material from distant sources. Relatively large concentrations of Pb and Cd are found in rain, but only in a small amount in canopy leachate. Aluminium, manganese and iron are more significantly washed off than Pb and Cd.     

Disposal of Mine Wastes Containing Pb and Zn Near the Ocean: An Assessment of Associated Environmental Implications in the Arctic

The past two decades have witnessed an increase in the exploration for, and development of, mineral resources at Arctic latitudes. Such effort has resulted in the commencement of production at a number of different localities in close proximity to the ocean. Since proximity to a source of transportation for the conveyance of concentrates to the market is a primary requirement governing the economic decisions for the mine to proceed, it is logical that ore deposits near a coastline are primary targets for development.

Closely tied to coastal mining developments is the need to dispose of tailings and waste rock in the most economical manner. Prior to the advent of heightened public awareness and environmental concern, and the enactment of pollution legislation, disposal practices were largely based upon convenience. Currently, however, proposed disposal and operating practices receive closer scrutiny, with a view to providing adequate protection for aquatic resources and habitat. This paper summarizes some of the features of three Arctic mines, wastes from which enter the marine environment, and compares the disposal practices used at each to measures of environmental change as indicated by metal concentrations in various media.     

Fluctuations of Population Size and Structure in the Northern Mole Vole: Preliminary Analysis

Long-term stationary studies on the ecology of the northern mole vole (Ellobius talpinus Pall.), performed by the mark–recapture method from 1985 to 1997, have provided original data on population dynamics and structure. The analysis shows that, to reveal cyclic fluctuations of population size in this species, the period of three years should be taken as a unit of time for estimating the duration of one phase. The 12-year population cycle in E. talpinus has four distinct phases: an increase, a peak, a decline, and a minimum. At each phase, the population is characterized by certain features of family structure, age composition, birth and death rates, and the composition of migrants.     

Prenatal diagnosis of femur-fibula-ulna complex by ultrasonography in a male fetus at 24 weeks of gestation

We present a case of ultrasonographic prenatal diagnosis at 24 weeks of femur—fibula—ulna (FFU) complex. To our knowledge, this is the first report of an early prenatal diagnosis of FFU.     

Air Temperature Changes in a Steppe Marmot Burrow in the Summer–Autumn Period

Observations of air temperature changes in a steppe marmot burrow were performed from late July to mid-October. Until early September, temperature in the burrow remained relatively constant, but then it began to decrease rapidly. This occurred after air temperature above the ground became equal to the temperature in the burrow. Supposedly, it is in this particular period that marmots begin to plug the entrance to the burrow with earth, thus reducing heat exchange between the increasingly cold aboveground air and the air in the burrow.     

Effects of calcium hydroxide and calcium chloride addition to bentonite in iron ore pelletization.

Pyrite ash is created as waste from the roasting of pyrite ores during the production of sulphuric acid. These processes generate great amounts of pyrite ash waste that is generally land filled. This creates serious environmental pollution due to the release of acids and toxic substances. Pyrite ash waste can be utilized in the iron production industry as a blast furnace feed to process this waste and prevent environmental pollution. The essential parameters affecting the pelletization process of pyrite ash were studied using bentonite as a binder. Experiments were then carried out using bentonite and a mixture of bentonite with calcium hydroxide and calcium chloride in order to make the bentonite more effective. The metallurgical properties of pyrite ash, bentonite, calcium hydroxide, calcium chloride, a mixture of these and sintered pellets were studied using X-ray analysis. The crushing strength tests were carried out to investigate the strength of pyrite ash waste pellets. The results of these analyses showed that pyrite ash can be agglomerated to pellets and used in the iron production industry as a blast furnace feed. The crushing strength of the pellets containing calcium hydroxide and calcium chloride in addition to bentonite was better than the strength of pellets prepared using only bentonite binder.     

Isotope tracing of submarine groundwater discharge offshore Ubatuba, Brazil: results of the IAEA–UNESCO SGD project

Results of groundwater and seawater analyses for radioactive (³H, ²²²Rn, ²²³Ra, ²²⁴Ra, ²²⁶Ra, and ²²⁸Ra) and stable (D and ¹⁸O) isotopes are presented together with in situ spatial mapping and time series ²²²Rn measurements in seawater, direct seepage measurements using manual and automated seepage meters, pore water investigations using different tracers and piezometric techniques, and geoelectric surveys probing the coast. This study represents first time that such a new complex arsenal of radioactive and non-radioactive tracer techniques and geophysical methods have been used for simultaneous submarine groundwater discharge (SGD) investigations. Large fluctuations of SGD fluxes were observed at sites situated only a few meters apart (from 0 cm d⁻¹ to 360 cm d⁻¹; the unit represents cm³/cm²/day), as well as during a few hours (from 0 cm d⁻¹ to 110 cm d⁻¹), strongly depending on the tidal fluctuations. The average SGD flux estimated from continuous ²²²Rn measurements is 17 ± 10 cm d⁻¹. Integrated coastal SGD flux estimated for the Ubatuba coast using radium isotopes is about 7 × 10³ m³ d⁻¹ per km of the coast. The isotopic composition (δD and δ¹⁸O) of submarine waters was characterised by significant variability and heavy isotope enrichment, indicating that the contribution of groundwater in submarine waters varied from a small percentage to 20%. However, this contribution with increasing offshore distance became negligible. Automated seepage meters and time series measurements of ²²²Rn activity concentration showed a negative correlation between the SGD rates and tidal stage. This is likely caused by sea level changes as tidal effects induce variations of hydraulic gradients. The geoelectric probing and piezometric measurements contributed to better understanding of the spatial distribution of different water masses present along the coast. The radium isotope data showed scattered distributions with offshore distance, which imply that seawater in a complex coast with many small bays and islands was influenced by local currents and groundwater/seawater mixing. This has also been confirmed by a relatively short residence time of 1–2 weeks for water within 25 km offshore, as obtained by short-lived radium isotopes. The irregular distribution of SGD seen at Ubatuba is a characteristic of fractured rock aquifers, fed by coastal groundwater and recirculated seawater with small admixtures of groundwater, which is of potential environmental concern and has implications on the management of freshwater resources in the region.     

Destruction of Aspergillus versicolor,Penicillium chrysogenum,Stachybotrys chartarum,and Cladosporium cladosporioides spores using chemical oxidation treatment process

The survival of aqueous suspensions of Penicillium chrysogenum, Stachybotrys chartarum, Aspergillus versicolor, and Cladosporium cladosporioides spores was evaluated using various combinations of hydrogen peroxide and Fe²⁺ as catalyst. Spore concentrations of 10⁶–10⁷ colony forming units per milliliter (CFU/mL) were suspended in water and treated with initial hydrogen peroxide and iron concentrations ranging from 0.05 to 10 percent and 100 to 200 ppm, respectively. After four hours of reaction time, samples were plated on agar plates, and the viable fraction of spores was determined by the number of colonies formed. Hydrogen peroxide concentrations above 50,000 ppm resulted in greater than 6‐log₁₀ reduction of viable spores for both catalyzed and noncatalyzed reactions. Iron had a strong catalytic effect when added to solutions with hydrogen peroxide concentration above 5,000 ppm and resulted in two to three orders of magnitude greater reduction compared to hydrogen peroxide alone. Additional samples taken after 24 hours of reaction time showed that the effect of the addition of 100 and 200 ppm of Fe²⁺ catalyst was mostly kinetic, and noncatalyzed hydrogen peroxide had sporicidal effects similar to catalyzed hydrogen peroxide. This study identified initial reagent concentrations of hydrogen peroxide and Fe²⁺ that accomplish a 6‐log₁₀ reduction of viable mold spores within reaction times of 4 and 24 hours. © 2007 Wiley Periodicals, Inc.