镧-铅复合污染下AM真菌对玉米生长和镧、铅吸收的影响

采用温室盆栽试验的方法,模拟不同程度的镧-铅复合污染土壤(50、200、800 mg·kg~(-1)),研究接种丛枝菌根(arbuscular mycorrhizal,AM)、真菌Claroideoglomus etunicatum(CE)和Rhizophagus intraradices(RI)对玉米(Zea mays L.)菌根侵染率、生物量、矿质营养元素吸收、C∶N∶P生态化学计量比、稀土镧(La)和重金属铅(Pb)吸收、转运的影响,旨在为稀土-重金属复合污染土壤的治理和修复提供科学依据.结果表明,AM真菌CE和RI均与玉米建立了共生关系,平均菌根侵染率为26.7%~95.8%;随着La-Pb复合污染含量的增加,玉米植株菌根侵染率、地上部和根部生物量以及N、P、K、Ca、Mg这5种矿质营养元素含量显著降低,而玉米植株C∶P和N∶P以及地上部和根部La、Pb含量显著增加.接种2种AM真菌使玉米植株生物量显著提高了17.8%~158.9%,地上部和根部P含量显著提高了24.5%~153.8%,降低了C∶P和N∶P,符合生长速率假设.在3种程度La-Pb复合污染含量土壤上,AM真菌使玉米植株根部Pb含量显著增加了51.3%~67.7%,地上部Pb含量显著降低了16.0%~67.7%,Pb从玉米根部向地上部的转运率降低了31.5%~54.7%;同时,接种AM真菌显著增加了轻度LaPb复合污染土壤上玉米植株的La含量,在中度La-Pb复合污染土壤上却显著减少了玉米地上部的La含量,增加了玉米根部的La含量,抑制了La从根部向地上部的转运,重度La-Pb复合污染土壤上均没有显著影响.试验结果初步证明,AM真菌具有促进稀土-重金属复合污染土壤植物修复的潜力,对于稀土-重金属复合污染土壤生态系统的植被恢复具有潜在应用价值.     

Context dependency and generality of fever in insects

Fever can reduce mortality in infected animals. Yet, despite its fitness-enhancing qualities, fever often varies among animals. We used several approaches to examine this variation in insects. Texas field crickets (Gryllus texensis) exhibited a modest fever (1 °C increase in preferred body temperature, T _pref) after injection of prostaglandin, which putatively mediates fever in both vertebrates and invertebrates, but they did not exhibit fever during chronic exposure to heat-killed bacteria. Further, chronic food limitation and mating status did not affect T _pref or the expression of behavioural fever, suggesting limited context dependency of fever in G. texensis. Our meta-analysis of behavioural fever studies indicated that behavioural fever occurs in many insects, but it is not ubiquitous. Thus, both empirical and meta-analytical results suggest that the fever response in insects ‘is widespread, although certainly not inevitable’ (Moore 2002). We highlight the need for future work focusing on standardizing an experimental protocol to measure behavioural fever, understanding the specific mechanism(s) underlying fever in insects, and examining whether ecological or physiological costs often outweigh the benefits of fever and can explain the sporadic nature of fever in insects.     

Effects of exotic fish farms on bird communities in lake and marine ecosystems

Salmon farming is a widespread activity around the world, also known to promote diverse environmental effects on aquatic ecosystems. However, information regarding the impact of salmon farming on bird assemblages is notably scarce. We hypothesize that salmon farming, by providing food subsidies and physical structures to birds, will change their local community structure. To test this hypothesis, we conducted a seasonal monitoring of bird richness, abundance, and composition at paired salmon pen and control plots in two marine and two lake sites in southern Chile, from fall 2002 to summer 2004. Overall, salmon farming had no significant effects on species richness, but bird abundance was significantly and noticeably higher in salmon pens than in controls. Such aggregation was mainly accounted for by the trophic guilds of omnivores, diving piscivores, carrion eaters, and perching piscivores, but not by invertebrate feeders, herbivores, and surface feeders. Species composition was also significantly and persistently different between salmon pens and controls within each lake or marine locality. The patterns described above remained consistent across environment types and seasons indicating that salmon farming is changing the community structure of birds in both lake and marine habitats by promoting functional and aggregation responses, particularly by favoring species with broader niches. Such local patterns may thus anticipate potential threats from the ongoing expansion of the salmon industry to neighboring areas in Chile, resulting in regional changes of bird communities, toward a less diverse one and dominated by opportunistic, common, and generalist species such as gulls, vultures, and cormorants.     

Pollination syndromes ignored: importance of non-ornithophilous flowers to Neotropical savanna hummingbirds

Generalization prevails in flower–animal interactions, and although animal visitors are not equally effective pollinators, most interactions likely represent an important energy intake for the animal visitor. Hummingbirds are nectar-feeding specialists, and many tropical plants are specialized toward hummingbird-pollination. In spite of this, especially in dry and seasonal tropical habitats, hummingbirds may often rely on non-ornithophilous plants to meet their energy requirements. However, quantitative studies evaluating the relative importance of ornithophilous vs. non-ornithophilous plants for hummingbirds in these areas are scarce. We here studied the availability and use of floral resources by hummingbirds in two different areas of the Cerrado, the seasonal savannas in Central Brazil. Roughly half the hummingbird visited plant species were non-ornithophilous, and these contributed greatly to increase the overall nectar availability. We showed that mean nectar offer, at the transect scale, was the only parameter related to hummingbird visitation frequency, more so than nectar offer at single flowers and at the plant scale, or pollination syndrome. Centrality indices, calculated using hummingbird–plant networks, showed that ornithophilous and non-ornithophilous plants have similar importance for network cohesion. How this foraging behaviour affects reproduction of non-ornithophilous plants remains largely unexplored and is probably case specific, however, we suggest that the additional energy provided by non-ornithophilous plants may facilitate reproduction of truly ornithophilous flowers by attracting and maintaining hummingbirds in the area. This may promote asymmetric hummingbird–plant associations, i.e., pollination depends on floral traits adapted to hummingbird morphology, but hummingbird visitation is determined more by the energetic "reward" than by pollination syndromes.     

Vulnerability risk assessment and adaptation to climate change induced sea level rise along the Mediterranean coast of Egypt

Consequence of the sea level rise (SLR) on the Mediterranean coastal areas in Egypt, particularly the Nile River Delta, has become an issue of major concern to Egypt’s population and the government. Previous publications disregard the entire Mediterranean coast of Egypt as an integral unit subject to the impacts of the SLR. This study aims to analyzing the risks, ranking the vulnerability and suggesting adaptation measures to mitigate the impact of the SLR along the Mediterranean coast of Egypt. Although the prominent features of Egypt’s Mediterranean coastal zone are the low lying coast of the Nile Delta, associated with land subsidence, tectonic activities and erosion; the contiguous coastal sectors are backed by shore-parallel carbonate ridges and Plateau (the western coast) and sand dune belts (Sinai coast). The coastal zone is ranked as high, moderate, and low vulnerable to the SLR. The social and biophysical vulnerabilities demonstrate the asymmetrical impacts of the SLR on the Mediterranean coast of Egypt. Areas at risk in the Alexandria region are Mandara and El Tarh whereas in the Nile Delta region, they are the Manzala Lagoon barrier, east and west of the Rosetta City, Gamil, and the Tineh plain. Risk associated with these impacts may be reduced provided the consideration of immediate and adequate adaptation measures.     

Warm forming die design,part I: Experimental validation of a novel thermal finite element modeling code

Finite element analysis (FEA) has become an invaluable tool in the design of sheet metal stamping dies and processes. FEA has gained widespread acceptance as the best method of optimizing dies for conventional stamping processes. More recently, FEA has been shown to be an effective method of designing tooling for sheet forming processes. In this work, an FEA based approach is applied to the warm stamping (warm forming) process. This work introduces a new thermal finite element analysis software called PASSAGE®/Forming (PASSAGE) that enables the up-front design of the thermal management of warm forming dies. This thermal finite element analysis software is designed to specifically handle the forming and optimization scenarios related to the heating of a stamping die while minimizing user interface time. In this work, PASSAGE has been applied to a simple block of steel embedded with cartridge heaters to validate the prediction capability of this software under two different heating conditions. The results show that PASSAGE is capable of predicting the actual steady-state temperature distribution within the block with an acceptable level of accuracy while yielding notable information to the user with respect to specifying power requirements. A finite element software package like PASSAGE is a valuable tool that will aid greatly in the implementation of warm forming as a manufacturing process beyond the scope of the laboratory and into production.     

Application of CGP-cross route process for microstructure refinement and mechanical properties improvement in steel sheets

A modified method of severe plastic deformation (SPD) entitled constrained groove pressing-cross route (CGP-CR) was introduced for imposing a high magnitude of equivalent strain of about 2.32 per pass on the sheet form samples. The major benefit of this improved route compared to previous common route was the more homogeneity of strain in the rolling (RD) and transverse (TD) directions of sheets. In this study, low carbon steel samples were used for examination of evolutions in microstructure and mechanical properties during SPD via CGP-CR process. Mechanical properties improvement were measured by tensile and macro hardness tests. The results indicate that CGP-CR process can effectively improve tensile strength; and also, yield stress and hardness of as-received low carbon steel samples were improved up to about 100% after two deformation passes. Also, high magnitude of inhomogeneity can be observed in hardness distribution through first pass of the process which diminishes in the subsequent passes. Microstructural evolutions during process were monitored by optical microscopy observations and X-ray diffraction analysis. The results demonstrate that initial ferritic microstructure with grain size of about 30 μm was refined to a 225 nm cell structure after two passes of CGP-CR process.