Analysis of a system for remote, dry removal of solidified mixed waste

This paper describes a novel technology for the removal of solidified radioactive waste from underground storage tanks at the DOE Hanford site in southeast Washington. The process involves the use of a unique high pressure system which pulverizes the hardened saltcake with stainless steel pellets to a powder for easy vacuum removal. The steel pellets can be magnetically separated from the waste material for re-use. Specifically this study analyzes the effects of various steel abrasives, pressure of the air stream, and stand-off distance on removal rates and penetration depth on simulated saltcake samples using the high pressure technique. A full-scale test set-up and protocol were implemented to allow for comprehensive testing. To insure reproducibility of the method, tests were then run for the optimum removal parameters. A time-dependent test was also conducted to determine the relationship of removal rates to length of pressure blasts. The results of these tests revealed that stand-off distance and pressure could be positively correlated to removal volumes. Additionally, a statistical analysis confirmed that nozzle angle is independent of removal rate. This study demonstrated that the pellet ‘blaster’ technique is a safe, effective method for removal of radioactive wastes without any increase in either waste mass or volume.     

In-situ sparging: Mass transfer mechanisms

In-situ sparging has been accepted as a method to rapidly remediate groundwater at considerably lower costs compared to remedies based on groundwater recovery alone. The success of in-situ sparging depends on effective mass transfer between air and contaminated media in the subsurface. Factors affecting mass transfer include advective airflow, diffusive transport, interphase chemical partitioning, and chemical and biological reaction rates between sparged gases and subsurface contaminants, minerals, and naturally occurring organic compounds. Understanding these factors can increase the design efficiency of in-situ sparging and assist in developing sparging systems that use gases other than air (i.e., oxygen, ozone, and methane).     

Concepts for sediment restoration on the palos verdes shelf,California

This article summarizes a study conducted by the U.S. Army Engineer Waterways Experiment Station to develop technical information and to evaluate the engineering feasibility of restoration alternatives for DDT-and PCB-contaminated sediments on the Palos Verdes shelf and slope near Los Angeles, California. The study evaluated the nonremoval alternative of in-place capping of contaminated sediments on the shelf and slope; removal of contaminated sediments using conventional and specialized dredging equipment and deep ocean mining equipment; treatment of contaminated sediments; and disposal of contaminated sediments in confined (diked) disposal facilities (CDFs), contained aquatic disposal (CAD) sites, upland landfills, and deep ocean basin sites. Cost estimates of the various alternatives were also prepared. This article concludes that restoration of the contaminated sediments is technically feasible. Sediments on the shelf and slope can be removed using available dredging technologies for deep water environments. In-place capping, CAD, and CDF alternatives are technically feasible. The deep ocean basin disposal alternative is not feasible from the technical or regulatory standpoint. The treatment alternative is not feasible from the implementability and economic standpoint.     

Book reviews

Earth Politics. Ernst Ulrich von Weizsacker, 1994, London, Zed Books, 234 pp. ISBN 1 85649 174 9, pb £14.95; hb £36.95

Greening Your Local Authority. Janice Morphet (Ed.), 1994, London, Pitman Publishing (originally Harlow, Longman), 144 pp. ISBN 0582 229 065, pb £32.50

Ecology and Society: an introduction. Luke Martell, 1994 London, Polity Press, 250 pp. ISBN 0 7456 1022 6, hb £39.50, ISBN 0 7456 1023 4, pb £11.95

The Politics of the Environment. Robert E. Goodin, 1994. Cheltenham, Edward Elgar, 599 pp. ISBN 1 85278 872 0, hb £115.00

Introduction to Environmental Impact Assessment John Glasson, Riki Therivel & Andrew Chadwick, 1994, London, UCL Press, 352 pp. ISBN 1 85728 117 9, hb £45.00, ISBN 1 85728 118 7, pb £14.95

Planning for the Planet: sustainable development strategies for local and strategic plans. Friends of the Earth, 1994, London, FoE, 104 pp. ISBN 1 85750 224 8, £12.00

Environmental Strategy and Sustainable Development: the corporate challenge for the 21st century. Richard Welford, 1995, London, Routledge, 240 pp. ISBN 0 415 10551 X, hb £40.00, ISBN 0 415 10552 8, pb £12.99

Housing and the Environment: a new agenda. Mark Bhatti, Jane Brooke & Mike Gibson (Eds), 1994, Foreword by Jonathon Porritt, Coventry, Chartered Institute of Housing, 210 pp. ISBN 0 901 607 738, £14.95     

Focusing biodiversity research on the needs of decision makers

The project on Biodiversity Uncertainties and Research Needs (BURN) ensures the advancement of usable knowledge on biodiversity by obtaining input from decision makers on their priority information needs about biodiversity and then using this input to engage leading scientists in designing policy-relevant research. Decision makers articulated concerns related to four issues: significance of biodiversity; status and trends of biodiversity; management for biodiversity; and the linkage of social, cultural, economic, legal, and biological objectives. Leading natural and social scientists then identified the research required to address the decision makers' needs and determined the probability of success. The diverse group of experts reached consensus on several fundamental issues, helping to clarify the role of biodiversity in land and resource management. The BURN participants identified several features that should be incorporated into policy-relevant research plans and management strategies for biodiversity. Research and assessment efforts should be: multidisciplinary and integrative, participatory with stakeholder involvement, hierarchical (multiple scales), and problem- and region-specific. The activities should be focused regionally within a global perspective. Meta-analysis of existing data is needed on all fronts to assess the state of the science. More specifically, the scientists recommended six priority research areas that should be pursued to address the information needs articulated by decision makers: (1) characterization of biodiversity, (2) environmental valuation, (3) management for sustainability—for humans and the environment (adaptive management), (4) information management strategies, (5) governance and stewardship issues, and (6) communication and outreach. Broad recommendations were developed for each research area to provide direction for research planning and resource management strategies. The results will directly benefit those groups that require biodiversity research to address their needs—whether to develop policy, manage natural resources, or make other decisions affecting biodiversity.     

Sludge-grown algae for culturing aquatic organisms: Part II. Sludge-grown algae as feeds for aquatic organisms

This project investigated the feasibility of using sewage sludge to culture microalgae (Chlorella-HKBU) and their subsequent usage as feeds for rearing different organisms. Part II of the project evaluated the results of applying the sludge-grown algae to feedOreochromis mossambicus (fish),Macrobrachium hainenese (shrimp), andMoina macrocopa (cladocera). In general, the yields of the cultivated organisms were unsatisfactory when they were fed the sludge-grown algae directly. The body weights ofO. mossambicus andM. macrocopa dropped 21% and 37%, respectively, although there was a slight increase (4.4%) inM. hainenese. However, when feeding the algal-fed cladocerans to fish and shrimp, the body weights of the fish and shrimp were increased 7% and 11% accordingly. Protein contents of the cultivated organisms were comparable to the control diet, although they contained a rather high amount of heavy metals. When comparing absolute heavy metal contents in the cultivated organisms, the following order was observed: alga > cladocera > shrimp, fish > sludge extracts. Bioelimination of heavy metals may account for the decreasing heavy metal concentrations in higher trophic organisms.     

Ecosystem management to achieve ecological sustainability: The case of South Florida

The ecosystems of South Florida are unique in the world. The defining features of the natural Everglades (large spatial scale, temporal patterns of water storage and sheetflow, and low nutrient levels) historically allowed a mosaic of habitats with characteristic animals. Massive hydrological alterations have halved the Everglades, and ecological sustainability requires fundamental changes in management.The US Man and the Biosphere Human-Dominated Systems Directorate is conducting a case study of South Florida using ecosystem management as a framework for exploring options for mutually dependent sustainability of society and the environment. A new methodology was developed to specify sustainability goals, characterize human factors affecting the ecosystem, and conduct scenario/consequence analyses to examine ecological and societal implications. South Florida has sufficient water for urban, agricultural, and ecological needs, but most water drains to the sea through the system of canals; thus, the issue is not competition for resources but storage and management of water. The goal is to reestablish the natural system for water quantity, timing, and distribution over a sufficient area to restore the essence of the Everglades.The societal sustainability in the Everglades Agricultural Area (EAA) is at risk because of soil degradation, vulnerability of sugar price supports, policies affecting Cuban sugar imports, and political/economic forces aligned against sugar production. One scenario suggested using the EAA for water storage while under private sugar production, thereby linking sustainability of the ecological system with societal sustainability. Further analyses are needed, but the US MAB project suggests achieving ecological sustainability consistent with societal sustainability may be feasible.     

Pressures,trends, and impacts in coastal zones: Interactions between socioeconomic and natural systems

This paper assesses the status of coastal zones in the context of expected climate change and its related impacts, as well as current and future socioeconomic pressures and impacts. It is argued that external stresses and shocks relating to sea-level rise and other changes will tend to exacerbate existing environmental pressures and damage in coastal zones. Coastal zones are under increasing stress because of an interrelated set of planning failures including information, economic market, and policy intervention failures. Moves towards integrated coastal zone management are urgently required to guide the coevolution of natural and human systems. Overtly technocentric claims that assessments of vulnerability undertaken to date are overestimates of likely future damages from global warming are premature. While it is the case that forecasts of sea-level rise have been scaled down, much uncertainty remains over, for example, combined storm, sea surge, and other events. In any case, within the socioeconomic analyses of the problem, resource valuations have been at best only partial and have failed to incorporate sensitivity analysis in terms of the discount rates utilized. This would indicate an underestimation of potential damage costs. Overall, a precautionary approach is justified based on the need to act ahead of adequate information acquisition, economically efficient resource pricing and proactive coastal planning.     

The role of corporations in ensuring biodiversity

Corporations own approximately 25% of all private land in the United States and, therefore, play an essential role in protecting biodiversity and maintaining natural habitats. The Wildlife Habitat Council (WHC) is a unique joint venture between conservation organizations and corporations to utilize corporate lands for ensuring biodiversity. The following case studies demonstrate how corporations have helped ensure healthy ecosystems and provided critical leadership in regional efforts. Amoco Chemical Company's Cooper River Plant has been instrumental in developing a cooperative project that involves numerous corporations, plantation owners, private citizens, nonprofit organizations, government agencies, and community groups to develop a comprehensive, ecosystem-based management plan for part of the Cooper River in Charleston, South Carolina, USA. The second case focuses on the Morie Company, a national sand quarry operator headquartered in southern New Jersey, USA. Morie Company is working with WHC, community groups, the Pinelands Commission, and other state regulatory agencies to explore sustainable development opportunities for companies within the Pinelands regulations. The third case takes us to DuPont Company's Asturias, Spain, site. A win—win success story of improved habitat and cost savings is the result of DuPont's concern for the environment, ability to work with a variety of groups, and willingness to consider innovative restoration techniques. The fourth case discusses Consumers Power Company's Campbell Plant in West Olive, Michigan, USA. In addition to implementing projects that contribute to biodiversity, Consumers Power has developed an environmental education field station to teach others about the importance of natural habitats. The final case highlights Baltimore Gas & Electric Company's efforts to maintain habitat for endangered species at their Calvert Cliffs site in Maryland.     

A design for environment methodology for evaluating materials

Industrial ecology is a new multidisciplinary field of study requiring that economic activity be integrated with, and have minimal impact on, surrounding natural systems. This systems-based approach is beginning to be implemented in private firms through the development of Design for Environment (DFE) methodologies and tools which support the integration of technological and environmental considerations in all economic activities. As part of this development process, a matrix system is proposed by the author by which the environmental and energy costs embedded in materials as used in generic applications may be identified, facilitating environmentally and economically efficient selection of materials. This Material Environmental Evaluation Matrix is supported by checklists which inform the evaluation process. A set of completed matrices for major materials in common applications forms the basis for an Environmentally Efficient Materials Database (EEMD). Once completed, the EEMD would inform consumers, product and process designers, business planners and managers, regulators and government purchasers, public interest groups, and others in their choice of optimal, environmentally and economically efficient, material options.