Biodegradation during contaminant transport in porous media: 4. Impact of microbial lag and bacterial cell growth

Miscible-displacement experiments were conducted to examine the impact of microbial lag and bacterial cell growth on the transport of salicylate, a model hydrocarbon compound. The impacts of these processes were examined separately, as well as jointly, to determine their relative effects on biodegradation dynamics. For each experiment, a column was packed with porous medium that was first inoculated with bacteria that contained the NAH plasmid encoding genes for the degradation of naphthalene and salicylate, and then subjected to a step input of salicylate solution. The transport behavior of salicylate was non-steady for all cases examined, and was clearly influenced by a delay (lag) in the onset of biodegradation. This microbial lag, which was consistent with the results of batch experiments, is attributed to the induction and synthesis of the enzymes required for biodegradation of salicylate. The effect of microbial lag on salicylate transport was eliminated by exposing the column to two successive pulses of salicylate, thereby allowing the cells to acclimate to the carbon source during the first pulse. Elimination of microbial lag effects allowed the impact of bacterial growth on salicylate transport to be quantified, which was accomplished by determining a cell mass balance. Conversely, the impact of microbial lag was further investigated by performing a similar double-pulse experiment under no-growth conditions. Significant cell elution was observed and quantified for all conditions/systems. The results of these experiments allowed us to differentiate the effects associated with microbial lag and growth, two coupled processes whose impacts on the biodegradation and transport of contaminants can be difficult to distinguish.     

Solar photocatalytic decolorization of methylene blue in water

In this study, a photocatalytic decolorization system equipped with immobilized TiO2 and illuminated by solar light was used to remove the color of wastewater. To examine the decoloring efficiency of this system, photocatalytic decolorization of an organic dye such as methylene blue was studied as an example. The effects of light source, pH, as well as the initial concentration of dye were also investigated. It was observed that the solution of methylene blue could be almost completely decolorized by the solar light/TiO2 film process while there was about 50% color remaining with solar irradiation only. In addition, it was found that the decoloring efficiency of solution was higher with solar light irradiation than with artificial UV light irradiation, even though the artificial UV light source supplied higher UV intensity at 254 nm. The color removal rate of methylene blue with solar light irradiation was almost twice that of artificial UV light irradiation. This phenomena was mainly attributed to that some visible light range of solar light was useful for exciting the methylene blue molecules adsorbed on TiO2 film, leading to a photosensitization process undergoing and decoloring efficiency promoted. This solar-assisted photocatalytic device showed potential application for decoloring organic dyes in wastewater.     

Biosurfactant-enhanced solubilization of NAPL mixtures

Remediation of nonaqueous phase liquids (NAPLs) by conventional pump-and-treat methods (i.e., water flushing) is generally considered to be ineffective due to low water solubilities of NAPLs and to mass-transfer constraints. Chemical flushing techniques, such as surfactant flushing, can greatly improve NAPL remediation primarily by increasing the apparent solubility of NAPL contaminants. NAPLs at hazardous waste sites are often complex mixtures. However, the equilibrium and nonequilibrium mass-transfer characteristics between NAPL mixtures and aqueous surfactant solutions are not well understood. This research investigates the equilibrium solubilization behavior of two- and three-component NAPL mixtures (containing akylbenzenes) in biosurfactant solutions. NAPL solubilization is found to be ideal in water (i.e., obeys Raoult's Law), while solubilization in biosurfactant solutions was observed to be nonideal. Specifically, the relatively hydrophobic compounds in the mixture experienced solubility enhancements that were greater than those predicted by ideal enhanced solubilization theory, while the solubility enhancements for the relatively hydrophilic compounds were less than predicted. The degree of nonideality is shown to be a nonlinear function of the NAPL-phase mole fraction. Empirical relationships based on the NAPL-phase mole fraction and/or micelle-aqueous partition coefficients measured in single-component NAPL systems are developed to estimate values for the multicomponent partition coefficients. Empirical relationships that incorporate both the NAPL-phase mole fraction and single-component partition coefficients yield much improved estimates for the multicomponent partition coefficient.     

A congener-specific PCDD/F emissions inventory for the UK: do current estimates account for the measured atmospheric burden?

Considerable effort has been expended in the UK and elsewhere to quantify and rank PCDD/F primary sources and emissions to the environment, principally the atmosphere, so that cost-effective source reduction measures can be taken. Here, we predict a congener-specific emissions inventory for primary and secondary nondioxin-regulated sources to the UK atmosphere, estimated to have ranged from 3 to 22 kg in 1996. The inventory profile is dominated by OCDD (approximately 30-40%), 1,2,3,4,6,7,8-HpCDD (approximately 15-19%) and 1,2,3,4,6,7,8-HpCDF (approximately 14-19%). Congeners 2,3,4,7,8-PeCDF and 1,2,3,7,8-PeCDD dominate the sigmaTEQ composition. Mass balance modelling suggests that the predicted congener pattern in UK air (based on the emission inventory) is similar to observed measurements, with absolute concentrations being estimated within a factor of 2 for most congeners. Calculations taking into account atmospheric weathering processes and long range (advective) transport suggest that PCDD/F sources to ambient air are primarily ongoing and that atmospheric mixing will mask individual emission source profiles/identities. This supports measured evidence for the consistency of PCDD/F air profiles observed around the UK throughout the year.     

PCDD/F reduction in incinerator flue gas by adding urea to RDF feedstock

The effect of urea on PCDD/F formation in a pilot incinerator was studied by incinerating urea with refuse-derived fuel (RDF) at three concentrations (0.1%, 0.5% and 1.0%, of the fuel feed). A distinct reduction in both PCDD/F and chlorophenol concentrations could be noticed when urea was introduced into the system. Partial-least-square (PLS) analysis of the data showed the importance of certain chlorophenol isomers as PCDD/F precursors, pointing to the possibility that the impact point of the urea inhibitor could be before the precursor molecules, i.e. chlorophenols, have been formed.     

Dissociation of sulfur hexafluoride tracer gas in the presence of an indoor combustion source

As an odorless, nontoxic, and inert compound, sulfur hexafluoride (SF6) is one of the most widely used tracer gases in indoor air quality studies in both controlled and uncontrolled environments. This compound may be subject to reactions with water vapor under elevated temperature to form acidic inorganic compounds such as HF and H2SO4. Thus, in the presence of unvented combustion sources such as kerosene heaters, natural gas heaters, gas log fireplaces, candles, and lamps, the SF6 dissociation may interfere with measurements of the emissions from these sources. Tests were conducted in a research house with a vent-free natural gas heater to investigate these potential interferences. It was observed that the heater operation caused about a 5% reduction of SF6 concentration, which can be an error source for the ventilation rate measurement and consequently the estimated pollutant emission rates. Further analysis indicates that this error can be much greater than the observed 5% under certain test conditions because it is a function of the ventilation flow rate. Reducing the tracer gas concentration has no effect on this error. A simple theoretical model is proposed to estimate the magnitude of this error. The second type of interference comes from the primary and secondary products of the SF6 dissociation, mainly H2SO4, SO2, HF, and fine particulate matter (PM). In the presence of approximately 5 ppm SF6, the total airborne concentrations of these species increased by a factor of 4-10. The tests were performed at relatively high SF6 concentrations, which is necessary to determine the interferences quantitatively. The second type of interference can be significantly reduced if the SF6 concentration is kept at a low ppb level.     

Critical remarks on the use of terrestrial moss (Hylocomium splendens and Pleurozium schreberi) for monitoring of airborne pollution

Duplicate samples of the two terrestrial moss species Hylocomium splendens and Pleurozium schreberi, which are widely used to monitor airborne heavy metal pollution, have been collected from eight catchments spread over a 1,500,000 km2 area in northern Europe. These were analysed for a total of 38 elements by inductively coupled plasma-mass spectrometry, inductively coupled plasma-atomic emission spectrometry and cold vapour-atomic absorption spectometry techniques. Results show that the moss species can be combined without interspecies calibration for regional mapping purposes. For the majority of elements the observed within-catchment variation is large--big composite samples over a large area should thus be collected when moss is to be used for monitoring purposes. For the majority of elements the input of dust governs moss chemistry. For a reliable 'contamination' signal over a sizeable area a major source is needed. Some elements show a dependence on climate/vegetation zone. In coastal areas the input of marine aerosols will alter the chemical signal obtained from moss samples.     

Effects of spraying the herbicides 2,4-D and 2,4,5-T on a population of the tortoise Testudo hermanni in southern Greece

A population of the tortoise Testudo hermanni near Olympia in southern Greece was studied by mark-recapture from 1975 to 1984. Part of the site was sprayed with the herbicides 2,4-dichlorophenoxyacetic acid (2,4-D) and 2,4,5-trichlorophenoxyacetic acid (2,4,5-T) each year from 1980, producing symptoms of poisoning (swollen eyes, fluid discharge from the nose and immobility) in tortoises. Survival rates of tortoises 10 cm or larger were significantly lower in the affected areas, with extra mortality of about 34% year-1, against an annual survival rate of 0.85-0.90 in unaffected areas. Changing population structures showed that juveniles were even more strongly affected, with the proportion of juveniles in samples decreased by half. The population in the sprayed area declined to near zero by 1984, due to mortality rather than to emigration, since more movements were recorded into than out of the affected area. There was no difference in body mass condition between sprayed and unsprayed areas, showing that effects were acute; mortality was not due to starvation from loss of food plants. The scale and pattern of mortality was similar to that from a severe scrub fire; spraying is potentially more catastrophic since often repeated at shorter intervals than burning. Possible physiological mechanisms of death are discussed. The susceptibility of tortoises to 2,4-D and 2,4,5-T (or to associated dioxin impurities) presents a warning for conservation of these late-maturing animals.     

Application of a wind model for the El Paso-Juarez airshed

A time-dependent, 3-dimensional mesoscale model, version 5 (MM5), developed by the Penn State University and the National Center for Atmospheric Research, was applied to study the meteorology over complex terrain of the El Paso-Juarez area. MM5 meteorological output data were compared against experimental data from the Texas Natural Resource Conservation Commission on days of reported high ozone concentrations. Model runs were conducted for a 36-, 12-, 4-km grid arrangement. Results indicate that the dispersion of pollutants by wind plays a significant role on days of low peak ozone concentration.     

Performance evaluation of laser-induced breakdown spectrometry as a multimetal continuous emission monitor

Laser-induced breakdown spectroscopy (LIBS) has been evaluated as a multimetal continuous emissions monitor (CEM) at the U.S. Environmental Protection Agency (EPA) rotary kiln incinerator simulator (RKIS) facility in Raleigh, NC. Two detection systems with a bifurcated optical fiber bundle were used for simultaneously monitoring the concentrations of Be, Cd, Cr, and Hg in the test. Two calibration techniques were evaluated in the laboratory for the field measurements. On-line calibration of relative metal concentration was also performed in the simulated incinerator gas stream. Toxic metal concentrations measured with LIBS have been compared with the EPA reference method (RM) results.